My other Project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ksbrktracer · 08-31-2009, 10:19 PM

Just some pics of my latest project , thought I would put them out there for you to see. Its a 67, gonna run a 383 sbc w/pg trans , 9" ford rearend with all strange internals, 5000 rpm stall , hipster brake , Billet Specialties Street Lites , It will be all steel with the exception of a fiberglass hood. I hoping for around 31-3200 pounds done and shooting for the 10's with no power adders. Im gonna run M/T e-t street radials , and wilwood brakes on all 4 corners.
I just got the car back from Riffel Motorsports in Newton Kansas and I cant say enough About how happy I am with the way it turned out. He installed a 10-point cage, tied the subframes and did it all in chromoly and tig welded everything. Will certify to 25.1 (8.50).

ksbrktracer · 08-31-2009, 10:23 PM

Just a few more pics....I will post more as I get more done....!!!!!!

BuiltByBrooks · 08-31-2009, 11:16 PM

Nice Work!!

ksbrktracer · 09-01-2009, 01:31 AM

Ive seen your project, subscribed to that thread matter of fact.......Now thats nice work.......but thanks for the compliment

BuiltByBrooks · 09-01-2009, 10:35 PM

Quote:

Originally Posted by ksbrktracer

Ive seen your project, subscribed to that thread matter of fact.......Now thats nice work.......but thanks for the compliment

Thanks!

**FRENCHBLUE72** · 09-02-2009, 12:40 AM

Very nice.....

ksbrktracer · 09-11-2009, 10:05 PM

not much done yet, couple of of updates tho , got all of the steering pieces installed, fabbed all new front brake lines, started patching the floor where the subframe connectors come thru , hope to get more done this weekend. Finally got some new coil springs for it also, as you can see the ones in it have been severly heated. Getting close to being able to set the engine and trans in shortly.

nuke1 · 09-12-2009, 12:32 AM

Wow that thing is gonna be a monster, way to go, those are the rims a friend wants me to put on his 71 nova but in 17's

78maliburat · 09-12-2009, 02:43 AM

[IMG]http://i240.photobucket.com/albums/ff196/78ma...

ksbrktracer · 09-14-2009, 11:25 PM

I like the 68 maliburat .... !!!!

Didnt make much progress this weekend but I did get the rearend housing picked up....About 2" s narrower than a stock rearend and had the rear brace installed.... By the way....How about my work bench...pretty slick huh....!!!!!!

ksbrktracer · 10-10-2009, 09:46 PM

Time for an update.....I finally got the motor and trans set in ....... and I got it fired up.......YAY.......nothing renews interest in a project more than getting it running if you ask me.. My best friend from kansas came down and helped me this past week .....And I do have to say without him being there and pushing me it wouldnt be to the point of where it is now. We scratch built the wiring harness....mainly because it will spend most of its time on the dragstrip and we added an electric waterpump , fan, line lock , trans brake and all MSD ignition. Still waiting on rear differntial pieces to show up.....they ordered the wrong pieces and are reordering them. Have a little more plumbing to do for the rear brakes. Starting to hang all of the sheetmetal back on it now....I can actually see the light at the end of the tunnel now that almost all of the fab work is done....Then it will be time to make it look good, but I think we will work the bugs out of it first. Here ar a few pictures too....!

ksbrktracer · 12-09-2009, 01:33 AM

Time for another update.....I got to make some passes at Tulsa raceway park.....High 7.50's @ 92 mph in the 1/8 mile.....Pretty happy because all of the passes were within 4 hundredths.....no tuning whatsoever....set the floats, set the timing and unload it off of the trailer and that was foot braking it....havent made a pass with the trans brake yet...I'm guessing maybe 3-4 tenths quicker with the brake......my 10's are closer than I thought

ksbrktracer · 12-09-2009, 01:39 AM

some more pictures , I have a video from the track , not sure how to get it on to the website though.

jgh64pkup · 12-23-2009, 08:55 PM

awesome build all you have to do to post a video it click on this icon

and insert your url from where the video is located

ksbrktracer · 12-24-2009, 10:04 AM

Quote:

Originally Posted by jgh64pkup

awesome build all you have to do to post a video it click on this icon

and insert your url from where the video is located

I will have to try that when I get on my home computer, Appreciate the comments

joe231 · 01-16-2010, 10:56 PM

WOW man
That is nice!
excellent work!!
do you pull it with the black CCSB?

ksbrktracer · 01-16-2010, 11:09 PM

Yah, Ive been using the ccsb to tow it, but I have since bought a 2wd 07 new body Tahoe.....man I like that thing......

joe231 · 01-16-2010, 11:11 PM

cool!
are you going to keep the crew cab?

ksbrktracer · 01-16-2010, 11:21 PM

Yah, I'm planning on it, got alot of stuff to do to it tho......never ends..!!

joe231 · 01-16-2010, 11:22 PM

yeah I have 2 projects and sometimes that seem like 2 too many

ksbrktracer · 01-16-2010, 11:29 PM

Tellme about the too many projects............they are setting everywhere over here it seems like.....!!!!!!!!!!

mcbassin · 07-08-2010, 11:20 AM

Awesome Project! You get to run it much?

ksbrktracer · 07-08-2010, 12:37 PM

Believe it or not I havent had it out of the shop, tore some things apart on it and fixing some things, then I bought a house and Ive been moving , got a new job, lost all of my vacation time .....etc.....been a really busy year so far...and too many other priorities....I'll get there tho..! Thanx for the compliment too !

08-31-2009, 10:19 PM	#1
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	My other Project Just some pics of my latest project , thought I would put them out there for you to see. Its a 67, gonna run a 383 sbc w/pg trans , 9" ford rearend with all strange internals, 5000 rpm stall , hipster brake , Billet Specialties Street Lites , It will be all steel with the exception of a fiberglass hood. I hoping for around 31-3200 pounds done and shooting for the 10's with no power adders. Im gonna run M/T e-t street radials , and wilwood brakes on all 4 corners. I just got the car back from Riffel Motorsports in Newton Kansas and I cant say enough About how happy I am with the way it turned out. He installed a 10-point cage, tied the subframes and did it all in chromoly and tig welded everything. Will certify to 25.1 (8.50). Attached Images

08-31-2009, 10:23 PM	#2
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: My other Project Just a few more pics....I will post more as I get more done....!!!!!! Attached Images

08-31-2009, 11:16 PM	#3
BuiltByBrooks Argon User Join Date: Oct 2008 Location: Qc, AZ Posts: 353	Re: My other Project Nice Work!!

09-01-2009, 01:31 AM	#4
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: My other Project Ive seen your project, subscribed to that thread matter of fact.......Now thats nice work.......but thanks for the compliment Last edited by ksbrktracer; 09-01-2009 at 01:33 AM.

09-02-2009, 12:40 AM	#6
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: My other Project Very nice..... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-11-2009, 10:05 PM	#7
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: My other Project not much done yet, couple of of updates tho , got all of the steering pieces installed, fabbed all new front brake lines, started patching the floor where the subframe connectors come thru , hope to get more done this weekend. Finally got some new coil springs for it also, as you can see the ones in it have been severly heated. Getting close to being able to set the engine and trans in shortly. Attached Images

09-12-2009, 12:32 AM	#8
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: My other Project Wow that thing is gonna be a monster, way to go, those are the rims a friend wants me to put on his 71 nova but in 17's __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

09-14-2009, 11:25 PM	#10
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: My other Project I like the 68 maliburat .... !!!! Didnt make much progress this weekend but I did get the rearend housing picked up....About 2" s narrower than a stock rearend and had the rear brace installed.... By the way....How about my work bench...pretty slick huh....!!!!!! Attached Images

10-10-2009, 09:46 PM	#11
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: My other Project Time for an update.....I finally got the motor and trans set in ....... and I got it fired up.......YAY.......nothing renews interest in a project more than getting it running if you ask me.. My best friend from kansas came down and helped me this past week .....And I do have to say without him being there and pushing me it wouldnt be to the point of where it is now. We scratch built the wiring harness....mainly because it will spend most of its time on the dragstrip and we added an electric waterpump , fan, line lock , trans brake and all MSD ignition. Still waiting on rear differntial pieces to show up.....they ordered the wrong pieces and are reordering them. Have a little more plumbing to do for the rear brakes. Starting to hang all of the sheetmetal back on it now....I can actually see the light at the end of the tunnel now that almost all of the fab work is done....Then it will be time to make it look good, but I think we will work the bugs out of it first. Here ar a few pictures too....! Attached Images

12-09-2009, 01:33 AM	#12
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: My other Project Time for another update.....I got to make some passes at Tulsa raceway park.....High 7.50's @ 92 mph in the 1/8 mile.....Pretty happy because all of the passes were within 4 hundredths.....no tuning whatsoever....set the floats, set the timing and unload it off of the trailer and that was foot braking it....havent made a pass with the trans brake yet...I'm guessing maybe 3-4 tenths quicker with the brake......my 10's are closer than I thought

12-09-2009, 01:39 AM	#13
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: My other Project some more pictures , I have a video from the track , not sure how to get it on to the website though. Attached Images

12-23-2009, 08:55 PM	#14
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: My other Project awesome build all you have to do to post a video it click on this icon and insert your url from where the video is located __________________ Gage 1967 C10 Shortbed Stepside

01-16-2010, 10:56 PM	#16
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My other Project WOW man That is nice! excellent work!! do you pull it with the black CCSB? __________________ *CHEVY ONLY*

01-16-2010, 11:09 PM	#17
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: My other Project Yah, Ive been using the ccsb to tow it, but I have since bought a 2wd 07 new body Tahoe.....man I like that thing......

01-16-2010, 11:11 PM	#18
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My other Project cool! are you going to keep the crew cab? __________________ *CHEVY ONLY*



Register or Log In To remove these advertisements.

01-16-2010, 11:21 PM	#19
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: My other Project Yah, I'm planning on it, got alot of stuff to do to it tho......never ends..!!

01-16-2010, 11:22 PM	#20
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My other Project yeah I have 2 projects and sometimes that seem like 2 too many __________________ *CHEVY ONLY*

01-16-2010, 11:29 PM	#21
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: My other Project Tellme about the too many projects............they are setting everywhere over here it seems like.....!!!!!!!!!!

07-08-2010, 11:20 AM	#22
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: My other Project Awesome Project! You get to run it much? __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

07-08-2010, 12:37 PM	#23
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: My other Project Believe it or not I havent had it out of the shop, tore some things apart on it and fixing some things, then I bought a house and Ive been moving , got a new job, lost all of my vacation time .....etc.....been a really busy year so far...and too many other priorities....I'll get there tho..! Thanx for the compliment too !

Register or Log In To remove these advertisements.