71 Chevy 1-Ton getting parted out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

D'Animal · 09-04-2009, 04:32 PM

Let me know what you may need. I posted it up for $900 and had a lot of tire kickers but no takers.

If you want the entire truck with a clear title, bring $900 and a trailer.

The cab is rusted beyond repair by a sane person.

The bottom of the doors are rusted.

The rest of the truck is complete.

It is a Regular wheel base, dually with a Chevy 350 and an Automatic transmission.

Regular wheel base = Not a Short Wheel Base and not a Long Horn long wheel base.

I really have no idea what the parts are worth. I feel many of the companies making reproduction parts are charging a premium for parts that do not fit correctly.

My time is worth about $60 an hour so if you want the piston wrist pin clips, you will pay for my time only.

**leddzepp** · 09-04-2009, 04:49 PM

Where is Exeter?

**too much stuff** · 09-04-2009, 04:57 PM

Any emblems that are good?

D'Animal · 09-04-2009, 05:51 PM

Here are the interior pics.

The bench seat is just sitting there.

D'Animal · 09-04-2009, 05:52 PM

Quote:

Originally Posted by leddzepp

Where is Exeter?

15 miles East of Visalia on Hwy 198

Visalia is 30 miles south of Fresno on Hwy 99

Wood Booger · 09-05-2009, 11:58 AM

do you still have the engine, if so what size? Also, do you have any pictures of the flat bed?

**BIGJAKE97** · 09-05-2009, 02:44 PM

what engine and tranny does it have? if it's a big block 4 speed, i'm looking for the clutch linkage. mostly the bracket on the engine. thanks, jake

novafrog · 09-05-2009, 02:52 PM

do you have e brake cable,swb

**w314speed** · 09-05-2009, 03:45 PM

Does it have a rear sway bar? If so, price and shipping to 30127! Thanks, Dan

dan42 · 09-05-2009, 05:42 PM

Exeter is about 2 1/2-3 hours from L.A. over the Grapevine. Animal, this is Dan on the Forum staff; see if you can get some prices posted for the stuff you want to sell. Thanks.

local13hutch · 09-06-2009, 07:43 AM

I would like to get my hands on just the bare frame I dont need any suspension parts or anything, Let me know...... I am going in that direction to pickup a sub I live in Orange County Socal.. Let me know after you pick it clean and before you cut it up. Oh and condition ? RUST.local13hutch..Thank you..

D'Animal · 09-07-2009, 08:58 AM

Quote:

Originally Posted by dan42

Exeter is about 2 1/2-3 hours from L.A. over the Grapevine. Animal, this is Dan on the Forum staff; see if you can get some prices posted for the stuff you want to sell. Thanks.

Thank you for the fair warning.

I will take some pics today and get some prices posted.

D'Animal · 09-07-2009, 07:07 PM

Quote:

Originally Posted by local13hutch

I would like to get my hands on just the bare frame I dont need any suspension parts or anything, Let me know...... I am going in that direction to pickup a sub I live in Orange County Socal.. Let me know after you pick it clean and before you cut it up. Oh and condition ? RUST.local13hutch..Thank you..

Do you want a 1-ton 2wd frame?

I have a 1972 GMC 3/4 ton 4x4 Frame sitting here with the axles under it.

local13hutch · 09-11-2009, 09:23 AM

I was told that a 1-ton frame was heavier duty for lack of a better word and im putting together a dually. But now im curious are your axles 14/bolt-rear....and 8 lug dana 44 up front ?....

Tx Firefighter · 09-11-2009, 12:46 PM

How much for the wrist pin clips shipped to 76082 ?

bellafleck · 09-11-2009, 08:41 PM

I need a good heater control

D'Animal · 09-12-2009, 07:50 AM

Quote:

Originally Posted by tx firefighter

how much for the wrist pin clips shipped to 76082 ?

lol

D'Animal · 09-12-2009, 07:53 AM

Quote:

Originally Posted by local13hutch

I was told that a 1-ton frame was heavier duty for lack of a better word and im putting together a dually. But now im curious are your axles 14/bolt-rear....and 8 lug dana 44 up front ?....

The 1-Ton frames are thicker and taller than the 3/4 ton frames.

I do have a 8 lug Dana 44 front axle assy with disc brakes.

$300 and it comes with everything from the rim and locking hub to the rim on the other side. It is basically as complete as it can be.

It is already removed.

D'Animal · 09-12-2009, 07:54 AM

Quote:

Originally Posted by bellafleck

I need a good heater control

The panel assy on the dash?

I have that.

local13hutch · 09-12-2009, 09:46 AM

Thank you for the info on the axles I have a 8 lug d 44 I was hoping you had a d-60 unit..How much for the bare frame one ton...

bellafleck · 09-12-2009, 03:37 PM

Quote:

Originally Posted by D'Animal

The panel assy on the dash?

I have that.

yep the dash assy for the heater control shipped to 46013
pm the price

local13hutch · 09-15-2009, 05:13 AM

Yes I am inerested in the frame ..? Are the 4x4 frames different from the 2x4 frames..I want to transfer all of my running gear from my 86 one ton dually to a one ton frame ..I am building a four door utility bed fifth wheel style truck and the cab is a 72 shortened sub. I hear in some states "THEY" inspect vehicles and the year of the frame is what they go by and knowing california with my luck they will probably adopt this practice the week I finish my vehicle im just trying to avoid any future headaches....Thankyou for any info or suggestions....local13hutch....

HONESTLEE · 09-15-2009, 05:26 PM

Do you have the complete stock radio and speaker, does it work, do you have all of the mounting parts, how muck. I am in L. A. can pick up or ship. Lee Smith
310-546-2828, Thanks

*mrhino* · 09-15-2009, 08:17 PM

interested in door panels, and heaterbox with the blower motor spacer,(blower motor to firewall) grommet thing shipped to 46516 thanks for your time

OldCreek · 10-14-2009, 11:50 PM

Tell me about that rear axle..C&C? HO72?

09-04-2009, 04:32 PM	#1
D'Animal Registered User Join Date: Aug 2008 Location: Exeter, Ca Posts: 100	72 Chevy 1-Ton getting parted out Let me know what you may need. I posted it up for $900 and had a lot of tire kickers but no takers. If you want the entire truck with a clear title, bring $900 and a trailer. The cab is rusted beyond repair by a sane person. The bottom of the doors are rusted. The rest of the truck is complete. It is a Regular wheel base, dually with a Chevy 350 and an Automatic transmission. Regular wheel base = Not a Short Wheel Base and not a Long Horn long wheel base. I really have no idea what the parts are worth. I feel many of the companies making reproduction parts are charging a premium for parts that do not fit correctly. My time is worth about $60 an hour so if you want the piston wrist pin clips, you will pay for my time only. Attached Images Last edited by D'Animal; 09-07-2009 at 07:03 PM.

09-04-2009, 04:49 PM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,995	Re: 71 Chevy 1-Ton getting parted out Where is Exeter? __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

09-04-2009, 04:57 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,712	Re: 71 Chevy 1-Ton getting parted out Any emblems that are good? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-04-2009, 05:51 PM	#4
D'Animal Registered User Join Date: Aug 2008 Location: Exeter, Ca Posts: 100	Re: 71 Chevy 1-Ton getting parted out Here are the interior pics. The bench seat is just sitting there. Attached Images Last edited by D'Animal; 09-07-2009 at 07:05 PM.

09-05-2009, 11:58 AM	#6
Wood Booger Only a long story if I tell it Join Date: Apr 2009 Location: Atascadero, CA Posts: 93	Re: 71 Chevy 1-Ton getting parted out do you still have the engine, if so what size? Also, do you have any pictures of the flat bed? __________________ NO MONEY, LOTS OF WORK, LOVE THE TRUCK! EMERGENCY CONTACT LIST, see below: http://67-72chevytrucks.com/vboard/s...d.php?t=211430

09-05-2009, 02:44 PM	#7
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 264	Re: 71 Chevy 1-Ton getting parted out what engine and tranny does it have? if it's a big block 4 speed, i'm looking for the clutch linkage. mostly the bracket on the engine. thanks, jake __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

09-05-2009, 02:52 PM	#8
novafrog Registered User Join Date: Apr 2009 Location: dunlow wv Posts: 435	Re: 71 Chevy 1-Ton getting parted out do you have e brake cable,swb

09-05-2009, 03:45 PM	#9
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,314	Re: 71 Chevy 1-Ton getting parted out Does it have a rear sway bar? If so, price and shipping to 30127! Thanks, Dan

09-05-2009, 05:42 PM	#10
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: 71 Chevy 1-Ton getting parted out Exeter is about 2 1/2-3 hours from L.A. over the Grapevine. Animal, this is Dan on the Forum staff; see if you can get some prices posted for the stuff you want to sell. Thanks. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

09-06-2009, 07:43 AM	#11
local13hutch MEMBER Join Date: Mar 2006 Location: garden grove, ca Posts: 185	Re: 71 Chevy 1-Ton getting parted out I would like to get my hands on just the bare frame I dont need any suspension parts or anything, Let me know...... I am going in that direction to pickup a sub I live in Orange County Socal.. Let me know after you pick it clean and before you cut it up. Oh and condition ? RUST.local13hutch..Thank you.. __________________ 86 sub 4wd, 1 ton, duallie, big block th475 72 c10 short fleet, pro street 72 K/5 blazer,2x4 almost stock 72 3/4 ton sub 4x4 61 morris minor pickup, chevy 4.3 v6 03 escalade, 24" momo's wifes 96 2wd 2door tahoe 67 2wd suburban 72 4wd k5 99 vortec 14bolt/d60 205/th400- 72 4wd crewcab 1 ton sb cummins allison -2012 2ss camaro black hard top- 8 yamaha quads- 05 4wd one ton duramax dually, family limo.

09-11-2009, 09:23 AM	#14
local13hutch MEMBER Join Date: Mar 2006 Location: garden grove, ca Posts: 185	Re: 71 Chevy 1-Ton getting parted out I was told that a 1-ton frame was heavier duty for lack of a better word and im putting together a dually. But now im curious are your axles 14/bolt-rear....and 8 lug dana 44 up front ?.... __________________ 86 sub 4wd, 1 ton, duallie, big block th475 72 c10 short fleet, pro street 72 K/5 blazer,2x4 almost stock 72 3/4 ton sub 4x4 61 morris minor pickup, chevy 4.3 v6 03 escalade, 24" momo's wifes 96 2wd 2door tahoe 67 2wd suburban 72 4wd k5 99 vortec 14bolt/d60 205/th400- 72 4wd crewcab 1 ton sb cummins allison -2012 2ss camaro black hard top- 8 yamaha quads- 05 4wd one ton duramax dually, family limo.

09-11-2009, 12:46 PM	#15
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: 71 Chevy 1-Ton getting parted out How much for the wrist pin clips shipped to 76082 ? __________________ I'm on the Instagram- @Gearhead_Kevin

09-11-2009, 08:41 PM	#16
bellafleck aka Dlumpy the Ford guy Join Date: Jan 2006 Location: Indiana Posts: 56	Re: 71 Chevy 1-Ton getting parted out I need a good heater control

09-12-2009, 09:46 AM	#20
local13hutch MEMBER Join Date: Mar 2006 Location: garden grove, ca Posts: 185	Re: 71 Chevy 1-Ton getting parted out Thank you for the info on the axles I have a 8 lug d 44 I was hoping you had a d-60 unit..How much for the bare frame one ton... __________________ 86 sub 4wd, 1 ton, duallie, big block th475 72 c10 short fleet, pro street 72 K/5 blazer,2x4 almost stock 72 3/4 ton sub 4x4 61 morris minor pickup, chevy 4.3 v6 03 escalade, 24" momo's wifes 96 2wd 2door tahoe 67 2wd suburban 72 4wd k5 99 vortec 14bolt/d60 205/th400- 72 4wd crewcab 1 ton sb cummins allison -2012 2ss camaro black hard top- 8 yamaha quads- 05 4wd one ton duramax dually, family limo.

09-15-2009, 05:13 AM	#22
local13hutch MEMBER Join Date: Mar 2006 Location: garden grove, ca Posts: 185	Re: 71 Chevy 1-Ton getting parted out Yes I am inerested in the frame ..? Are the 4x4 frames different from the 2x4 frames..I want to transfer all of my running gear from my 86 one ton dually to a one ton frame ..I am building a four door utility bed fifth wheel style truck and the cab is a 72 shortened sub. I hear in some states "THEY" inspect vehicles and the year of the frame is what they go by and knowing california with my luck they will probably adopt this practice the week I finish my vehicle im just trying to avoid any future headaches....Thankyou for any info or suggestions....local13hutch.... __________________ 86 sub 4wd, 1 ton, duallie, big block th475 72 c10 short fleet, pro street 72 K/5 blazer,2x4 almost stock 72 3/4 ton sub 4x4 61 morris minor pickup, chevy 4.3 v6 03 escalade, 24" momo's wifes 96 2wd 2door tahoe 67 2wd suburban 72 4wd k5 99 vortec 14bolt/d60 205/th400- 72 4wd crewcab 1 ton sb cummins allison -2012 2ss camaro black hard top- 8 yamaha quads- 05 4wd one ton duramax dually, family limo.



Register or Log In To remove these advertisements.

09-15-2009, 05:26 PM	#23
HONESTLEE Registered User Join Date: Sep 2009 Location: Lawndale, calif Posts: 3	Re: 71 Chevy 1-Ton getting parted out Do you have the complete stock radio and speaker, does it work, do you have all of the mounting parts, how muck. I am in L. A. can pick up or ship. Lee Smith 310-546-2828, Thanks

09-15-2009, 08:17 PM	#24
mrhino Account Suspended Join Date: Aug 2007 Location: USA Posts: 1,223	Re: 71 Chevy 1-Ton getting parted out interested in door panels, and heaterbox with the blower motor spacer,(blower motor to firewall) grommet thing shipped to 46516 thanks for your time

10-14-2009, 11:50 PM	#25
OldCreek Registered User Join Date: Jan 2007 Location: Central Coast California Posts: 1,026	Re: 71 Chevy 1-Ton getting parted out Tell me about that rear axle..C&C? HO72? __________________ 1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold 1972 C10 5.3L/4L60E 12bolt 5Lug - Sold 1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!! 1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold 1984 K10 SWB 7.4L/4L80e/NP208 Corp 10/12 bolt Sold 1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70/3.73!!! (Sold) 2003 K2500HD 8.1/Allison1000/NP263

Register or Log In To remove these advertisements.