ID '60-'62 POwer Brake Booster Adapter Bracket With A Clutch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Captainfab** · 09-12-2009, 10:01 PM

If you have a manual transmission in your truck and also want power brakes, this is what you need. This bracket is fabricated from laser cut 10ga. mild steel and fits 1960-62 Chevy and 1960-63 GMC pickups, Suburban and Panels and is 100% bolt on using holes already in your firewall. The booster side of the bracket has a 3 3/8" x 3 1/2" hole pattern. Boosters with this pattern are commonly found on S10's and full size pickups from 1988 to at least 1998, Suburbans, Blazers and Tahoes from 1992 to at least 1998. You can also find compatable boosters on early to mid 70's Impalas and Caprices. Of course you will have to join the booster pushrod to your stock MC pushrod that attaches to your brake pedal. This can be done by either threading both ends and using a coupling nut, or by just welding them together once you determine the correct length.

For the hydraulic clutch master, this is setup to use a readily available Wilwood master cylinder. To install the master cylinder you will have to drill (2) 11/32" holes for the mounting bolts, and a 1 1/2" hole (with a hole saw) to accommodate the center of the master cylinder. The supplied standoff simply bolts to your clutch pedal using an existing hole. Then the pushrod and heim joint screw onto the clutch master pushrod on one end and to bolts to the standoff on the other end.

This adapter plate kit contains the adapter plate with mounting hardware, the standoff, pushrod and heim joint with related hardware and the Wilwood master cylinder. The cost on this is $260.00 plus the flat rate shipping cost of $22.65. As with my other brake booster brackets, you can add powder coating for an additional $10.50. This pricing is always current and up to date. To place an order, post in this thread, send me a PM or send an email to captainfab454@hotmail.com, and I will give you the ordering and payment instructions and current lead time.

Please see posts #33, #43 & #44

**Captainfab** · 09-12-2009, 10:05 PM

Here are some more pics. The turquoise booster is a dual diaphram unit from a 1982-87 S10.

**Captainfab** · 09-12-2009, 10:09 PM

Here are a couple of pics with a booster from a 1988-98 fullsize pickup, or 1992-98 Suburban, Blazer, or Tahoe. The clearance is a little less with the clutch master, but it is still easy to get at the cap.

joe231 · 09-12-2009, 10:20 PM

Nice product, as usual

pedro6371 · 09-12-2009, 10:37 PM

oh man that looks nice capt let me put some money together in im going to get it.

**Captainfab** · 09-14-2009, 10:54 PM

Quote:

Originally Posted by joe231

Nice product, as usual

Thanks Joe

Quote:

Originally Posted by pedro6371

oh man that looks nice capt let me put some money together in im going to get it.

No problem, just let me know when you're ready.

Quote:

Originally Posted by MailManX2

Wow looks great.. Even though my truck doesn't have any wheels/tires or an motor/tranny I'll take one of the $179.50 versions. Let me know where to send the money

Yours is on the way Ken......Thanks

**Captainfab** · 09-15-2009, 04:01 PM

Somehow the pic of option #2 didn't get posted, so here it is.

Carkrazy1987 · 10-01-2009, 02:29 PM

what master cylinder would you recommend with the boosters? i been wanting to do power brakes on my manual trans 60 c-10 but dont want to fork over 700bux, awsome parts you got, im defenetly interested in it

**Captainfab** · 10-01-2009, 10:47 PM

Your best bet is to use the master cylinder that is designed for the braking system that you have on your truck. You didn't say if yours is stock or not, but if it is, you can use a dual reservior master from a '67-'70 pickup. If you have upgraded to front discs from say a '73-'87 then use a master from those years. Let me know when you want to get the booster bracket and clutch master combo.

Quote:

Originally Posted by Carkrazy1987

what master cylinder would you recommend with the boosters? i been wanting to do power brakes on my manual trans 60 c-10 but dont want to fork over 700bux, awsome parts you got, im defenetly interested in it

bubba327 · 10-14-2009, 05:39 PM

Hey captain- Good to see you are always thinking of new ways to improve an old truck..Bubba

**Captainfab** · 10-14-2009, 11:49 PM

Thanks Bubba

markeb01 · 10-25-2009, 12:29 AM

That's a beautifully designed piece, much better than the Master Power offering. If my truck wasn't already done I'd install one in mine. The package deal is well thought out and value priced.

**Captainfab** · 10-25-2009, 11:22 PM

Thank you for the compliment Mark.

mojakeke · 11-24-2009, 03:04 PM

Seams like it's a very good option that is not that expensive,

mojakeke · 11-24-2009, 03:53 PM

So the stock chutch spring and bracket would need to be removed, and the spring would need to be replaced, correct??

**Captainfab** · 11-25-2009, 12:53 AM

The cab that I used for R&D has the return spring up high, so I don't believe there is any need to relocate it. That is unless your truck has a different return spring arraingment.

It can be seen in the upper right of this pic.

Quote:

Originally Posted by mojakeke

So the stock chutch spring and bracket would need to be removed, and the spring would need to be replaced, correct??

mojakeke · 11-25-2009, 03:10 PM

Quote:

Originally Posted by Captainfab

The cab that I used for R&D has the return spring up high, so I don't believe there is any need to relocate it. That is unless your truck has a different return spring arraingment.

It can be seen in the upper right of this pic.

YES IT DOES, IT EVE HAS A BIGER SPRING, BUT IT CAN BE REMOVED IF I'M NOT MISTAKEN,

mojakeke · 11-25-2009, 03:16 PM

Quote:

Originally Posted by Captainfab

Somehow the pic of option #2 didn't get posted, so here it is.

It doesen't seem like there will be an issue to install it on mine, If so, I'm intrested on this option(#2), and woul like info on other options for color, Thanks!!!!

**Captainfab** · 11-25-2009, 11:57 PM

That one there is different than the one I have. What year and model of truck is that in? I'll send you a PM

mojakeke · 11-26-2009, 02:58 PM

Quote:

Originally Posted by Captainfab

That one there is different than the one I have. What year and model of truck is that in? I'll send you a PM

It's a 1963 gmc, 4x4 , thanks!!!

**Captainfab** · 12-20-2009, 12:14 AM

Checkout the December deal over in the 'Vendor Marketplace' HERE

**Captainfab** · 02-13-2010, 12:55 AM

Bump

**nbrfd007** · 02-13-2010, 02:16 PM

I have the same clutch setup as Mojakeke on a 62 GMC Suburban 4X4. Did you find a way to make it work on this setup?
Thanks,
Tim

**Captainfab** · 02-13-2010, 11:57 PM

I haven't heard back from Mojakeke on how the install went. If he doesn't chime in here you might send him a PM. The cab that I used for the R&D was a Chevy cab, so that must be where the difference lies. I would think that all you would need to do is convert to a Chevy style return spring.

Quote:

Originally Posted by nbrfd007

I have the same clutch setup as Mojakeke on a 62 GMC Suburban 4X4. Did you find a way to make it work on this setup?
Thanks,
Tim

Ghostwhite · 05-26-2010, 06:39 AM

I thought I saw somewhere that you offer a bracket for a manual MC with and the wilwood clutch MC. Am I crazy?

I would like to use a newer manual Brake MC with a separate Clutch MC for use with Disc Brakes, and to get rid of my stock dual MC.

09-12-2009, 10:01 PM	#1
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	'60-'62 POwer Brake Booster Adapter Bracket With A Clutch If you have a manual transmission in your truck and also want power brakes, this is what you need. This bracket is fabricated from laser cut 10ga. mild steel and fits 1960-62 Chevy and 1960-63 GMC pickups, Suburban and Panels and is 100% bolt on using holes already in your firewall. The booster side of the bracket has a 3 3/8" x 3 1/2" hole pattern. Boosters with this pattern are commonly found on S10's and full size pickups from 1988 to at least 1998, Suburbans, Blazers and Tahoes from 1992 to at least 1998. You can also find compatable boosters on early to mid 70's Impalas and Caprices. Of course you will have to join the booster pushrod to your stock MC pushrod that attaches to your brake pedal. This can be done by either threading both ends and using a coupling nut, or by just welding them together once you determine the correct length. For the hydraulic clutch master, this is setup to use a readily available Wilwood master cylinder. To install the master cylinder you will have to drill (2) 11/32" holes for the mounting bolts, and a 1 1/2" hole (with a hole saw) to accommodate the center of the master cylinder. The supplied standoff simply bolts to your clutch pedal using an existing hole. Then the pushrod and heim joint screw onto the clutch master pushrod on one end and to bolts to the standoff on the other end. This adapter plate kit contains the adapter plate with mounting hardware, the standoff, pushrod and heim joint with related hardware and the Wilwood master cylinder. The cost on this is $260.00 plus the flat rate shipping cost of $22.65. As with my other brake booster brackets, you can add powder coating for an additional $10.50. This pricing is always current and up to date. To place an order, post in this thread, send me a PM or send an email to captainfab454@hotmail.com, and I will give you the ordering and payment instructions and current lead time. Please see posts #33, #43 & #44 Attached Images __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 01-21-2022 at 10:05 PM. Reason: Shipping cost increase

09-12-2009, 10:37 PM	#5
pedro6371 Registered User Join Date: Apr 2008 Location: san fernando valley CA Posts: 169	Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch oh man that looks nice capt let me put some money together in im going to get it.

09-15-2009, 04:01 PM	#7
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch Somehow the pic of option #2 didn't get posted, so here it is. Attached Images __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

10-01-2009, 02:29 PM	#8
Carkrazy1987 Registered User Join Date: Dec 2007 Location: West Palm Beach, Fl Posts: 11	Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch what master cylinder would you recommend with the boosters? i been wanting to do power brakes on my manual trans 60 c-10 but dont want to fork over 700bux, awsome parts you got, im defenetly interested in it

10-14-2009, 05:39 PM	#10
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch Hey captain- Good to see you are always thinking of new ways to improve an old truck..Bubba __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

09-12-2009, 10:05 PM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch Here are some more pics. The turquoise booster is a dual diaphram unit from a 1982-87 S10. Attached Images __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

09-12-2009, 10:09 PM	#3
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch Here are a couple of pics with a booster from a 1988-98 fullsize pickup, or 1992-98 Suburban, Blazer, or Tahoe. The clearance is a little less with the clutch master, but it is still easy to get at the cap. Attached Images __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

09-12-2009, 10:20 PM	#4
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch Nice product, as usual __________________ *CHEVY ONLY*

10-14-2009, 11:49 PM	#11
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch Thanks Bubba __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

10-25-2009, 12:29 AM	#12
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch That's a beautifully designed piece, much better than the Master Power offering. If my truck wasn't already done I'd install one in mine. The package deal is well thought out and value priced.

10-25-2009, 11:22 PM	#13
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch Thank you for the compliment Mark. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

11-24-2009, 03:04 PM	#14
mojakeke Registered User Join Date: Sep 2009 Location: Temecula, CA Posts: 41	Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch Seams like it's a very good option that is not that expensive,

11-24-2009, 03:53 PM	#15
mojakeke Registered User Join Date: Sep 2009 Location: Temecula, CA Posts: 41	Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch So the stock chutch spring and bracket would need to be removed, and the spring would need to be replaced, correct??

11-25-2009, 11:57 PM	#19
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch That one there is different than the one I have. What year and model of truck is that in? I'll send you a PM __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

12-20-2009, 12:14 AM	#21
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch Checkout the December deal over in the 'Vendor Marketplace' HERE __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 12-20-2009 at 12:15 AM.



Register or Log In To remove these advertisements.

02-13-2010, 12:55 AM	#22
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch Bump __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

02-13-2010, 02:16 PM	#23
nbrfd007 Senior Member Join Date: Nov 2007 Location: New Blaine, Arkansas Posts: 751	Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch I have the same clutch setup as Mojakeke on a 62 GMC Suburban 4X4. Did you find a way to make it work on this setup? Thanks, Tim

05-26-2010, 06:39 AM	#25
Ghostwhite Squarebody guy Join Date: Apr 2009 Location: Minnesota Posts: 335	Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch I thought I saw somewhere that you offer a bracket for a manual MC with and the wilwood clutch MC. Am I crazy? I would like to use a newer manual Brake MC with a separate Clutch MC for use with Disc Brakes, and to get rid of my stock dual MC.

Register or Log In To remove these advertisements.