craiglist find, will it work?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mainermikeyd · 09-19-2009, 01:46 PM

Found this find on the local craigslist seems like a good deal, but will it actually fit my truck 14 bolt 10.5", only numbers i could pull off it were the bottom drivers side of pig 3977323?? Need your help, thanks

http://maine.craigslist.org/pts/1372733430.html

mainermikeyd · 09-19-2009, 06:34 PM

Anyone???????????? Is everyone driving sissy half-tons???????

*2tons of fun* · 09-19-2009, 08:27 PM

wtf do you want a govloc pos 3.73 for?

in the later years [post 88] the inner most pinion support bearing was changed, i dont know if they changed the id resulting in a different gear dimension or just the od of the bearing changing the bore in the housing.

either way, i would pass.

mainermikeyd · 09-19-2009, 10:33 PM

Just looking to change gears from 4.10 to 3.73 it's a DD during the winter an looking for a little better mpg, thanks for the help!!!

09-19-2009, 01:46 PM	#1
mainermikeyd Registered User Join Date: Sep 2008 Location: Limington, ME Posts: 290	craiglist find, will it work?? Found this find on the local craigslist seems like a good deal, but will it actually fit my truck 14 bolt 10.5", only numbers i could pull off it were the bottom drivers side of pig 3977323?? Need your help, thanks http://maine.craigslist.org/pts/1372733430.html __________________ Once a Marine Always a Marine OOH-RAH GM Fanatic 1982 K20 4" Rancho lift 350cid, edelbrock performer intake 1405 carb, hedman headers, TH350, " Wheres the MUD!!!!!!!!!!" 1986 c30 camper special 454, th400 (for sale) 1984 K10 Big Ten (project) needs motor 1984 C10 355, 700r4, (project) needs shortbox bed Last edited by mainermikeyd; 09-19-2009 at 01:50 PM.

09-19-2009, 06:34 PM	#2
mainermikeyd Registered User Join Date: Sep 2008 Location: Limington, ME Posts: 290	Re: craiglist find, will it work?? Anyone???????????? Is everyone driving sissy half-tons??????? __________________ Once a Marine Always a Marine OOH-RAH GM Fanatic 1982 K20 4" Rancho lift 350cid, edelbrock performer intake 1405 carb, hedman headers, TH350, " Wheres the MUD!!!!!!!!!!" 1986 c30 camper special 454, th400 (for sale) 1984 K10 Big Ten (project) needs motor 1984 C10 355, 700r4, (project) needs shortbox bed

09-19-2009, 08:27 PM	#3
2tons of fun Account Suspended Join Date: Jan 2009 Location: galt ca, Posts: 749	Re: craiglist find, will it work?? wtf do you want a govloc pos 3.73 for? in the later years [post 88] the inner most pinion support bearing was changed, i dont know if they changed the id resulting in a different gear dimension or just the od of the bearing changing the bore in the housing. either way, i would pass.

09-19-2009, 10:33 PM	#4
mainermikeyd Registered User Join Date: Sep 2008 Location: Limington, ME Posts: 290	Re: craiglist find, will it work?? Just looking to change gears from 4.10 to 3.73 it's a DD during the winter an looking for a little better mpg, thanks for the help!!! __________________ Once a Marine Always a Marine OOH-RAH GM Fanatic 1982 K20 4" Rancho lift 350cid, edelbrock performer intake 1405 carb, hedman headers, TH350, " Wheres the MUD!!!!!!!!!!" 1986 c30 camper special 454, th400 (for sale) 1984 K10 Big Ten (project) needs motor 1984 C10 355, 700r4, (project) needs shortbox bed



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.