NY 700r4 package on ebay - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jlaird · 09-20-2009, 04:21 PM

I am selling my 700r4 that I planned on putting in a custom truck I am building. I have decided to go manual. I have a lot of time and money invested in this setup, so hopefully somebody will get a good deal.

To start off, the tranny is the more desirable later year 700r4 which came out of an early 90's caprice. It is has been completely rebuilt and has no miles on it since the rebuild. It has just been sitting in my rolling chassis. It has been epoxy primed and topcoated with a gloss black urethane.

Next is the Torque Converter. Its a BDR converter which is a custom builder of converters, ie made to order. It has a stall speed of 2400/2800.

Next is a TCI Flexplate part # 399773. Last are some items from Bowtie Overdrives. I purchased their Lockup wiring kit.
Here is the link: http://www.bowtieoverdrives.com/cata...php?ITEMID=332

I also purchased their TV Made Ez system.
Here is the link: http://www.bowtieoverdrives.com/cata...php?ITEMID=214

All these items are new, never been used. What you see in the pictures is how its sat since purchased. The stock dipstick is also included as are ARP fasteners to connect the flexplate to the TC. If you have any questions, please let me know and I will try to answer. Asking $950 for everything.

bac1755 · 09-20-2009, 04:33 PM

everytime something like this comes up I dont have the money right away...

jlaird · 09-20-2009, 06:37 PM

Quote:

Originally Posted by bac1755

everytime something like this comes up I dont have the money right away...

I can provide financing

bac1755 · 09-20-2009, 08:58 PM

Quote:

Originally Posted by jlaird

I can provide financing

There you go, im sold. Whats the interest rates on it?

jlaird · 09-20-2009, 09:20 PM

Quote:

Originally Posted by bac1755

There you go, im sold. Whats the interest rates on it?

For a fellow board member, 0% for 72 months! I'll even give cash for your clunker trans

bac1755 · 09-20-2009, 10:05 PM

Quote:

Originally Posted by jlaird

For a fellow board member, 0% for 72 months! I'll even give cash for your clunker trans

to funny man.

VA72C10 · 09-20-2009, 11:43 PM

Bump for you.

jlaird · 09-22-2009, 07:09 AM

Thanks VA72C10!

VA72C10 · 09-22-2009, 05:32 PM

No problem

jlaird · 09-28-2009, 10:06 PM

ttt, anybody?

VA72C10 · 09-28-2009, 11:43 PM

I've bought the bag brackets Jlaird sells on ebay and just recently bought his frame mounted brake bracket and some air bag fittings. Shipped it all fast and packaged well. Nice guy to do business with!

budder71 · 09-29-2009, 12:01 AM

will this set up work for a 71 GMC JIMMY 4WD ?

jlaird · 09-29-2009, 07:09 AM

Quote:

Originally Posted by budder71

will this set up work for a 71 GMC JIMMY 4WD ?

Anybody want to chime in? I don't know anything about 4wd's.

stunna · 09-29-2009, 10:14 AM

Quote:

Originally Posted by jlaird

ttt, anybody?

i know you said this tranny has been rebuilt, does that mean you just put new oem parts or did u upgrade stuff like the clutches, servo,etc you have any idea of how much horsepower it can take? i will probably be around 400 with my motor.

VA72C10 · 09-29-2009, 11:42 AM

Quote:

Originally Posted by jlaird

Anybody want to chime in? I don't know anything about 4wd's.

I'm pretty sure the tailshafts are different between 2wd and 4wd....

**Hart_Rod** · 09-30-2009, 10:30 AM

I'm really interested in this setup. Do you think it will hold 630 HP/650 TQ? I've got a 383 with a supercharger. Any ideas on shipping to 32571? Let me know.

R/

jlaird · 09-30-2009, 06:49 PM

Quote:

Originally Posted by stunna

i know you said this tranny has been rebuilt, does that mean you just put new oem parts or did u upgrade stuff like the clutches, servo,etc you have any idea of how much horsepower it can take? i will probably be around 400 with my motor.

I'm not sure about the clutches and servos. I bought this trans about a year ago from somebody that was going to put it into a chevelle project. He had it rebuilt at a transmission shop. All I can remember is he said they did put upgraded parts in (I don't know what brand), a shift kit was put in it (B&M) and he spent around $1000 for the rebuild. I personally put new wiring in it and a Throttle Valve adjuster kit both of which came from the Bowtie Overdrive kits I purchased.

Quote:

Originally Posted by Hart_Rod

I'm really interested in this setup. Do you think it will hold 630 HP/650 TQ? I've got a 383 with a supercharger. Any ideas on shipping to 32571? Let me know.

R/

I would say this trans is good for any SBC, but with a supercharger is questionable. If you can assist me on how to go about shipping this, I would be willing to.

C10Sim · 10-09-2009, 12:24 PM

Is a lockup or non lockup?

27 or 30 spline?

Did you buy the stall or did it come with purchase from the previous owner?

Thanks,
Simon

jlaird · 10-09-2009, 06:11 PM

Quote:

Originally Posted by C10Sim

Is a lockup or non lockup?

27 or 30 spline?

Did you buy the stall or did it come with purchase from the previous owner?

Thanks,
Simon

Its a lockup. Look at the first post for a link to the lockup wiring kit I purchased. Its a 30 spline input, 27 spline output. I bought everything new from the manufacturer except the trans itself. Let me know if you have any other questions.

Josh

jlaird · 10-25-2009, 01:15 PM

reduced to $850. Any takers??

Devil Pup · 10-25-2009, 01:32 PM

Quote:

Originally Posted by jlaird

reduced to $850. Any takers??

Not gonna lie, i dont have a clue what all goes along with one of these trannys. i do know that i have wanted one ever since i changed the 4 speed to an auto turbo 350 in my truck. How much extra is needed if i bought this and had to put it in. im on a serious budget. lol Thanks

jlaird · 10-25-2009, 02:56 PM

since you currently have an automatic, not too much. Your th350 crossmember will work with the 700r4. Do you have a long or short tailshaft on your turbo 350? If a short, your driveshaft should bolt right up. Do you have column or floor shift?

lowdownstar · 10-25-2009, 06:01 PM

what rear end gears where you going to be running with this trany? not sure on the stall speed.

Thanks Ray

jlaird · 10-25-2009, 08:00 PM

3.73's

budder71 · 10-25-2009, 08:42 PM

your not coming through Mississippi anytime soon are you ?

09-20-2009, 04:21 PM	#1
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	700r4 package on ebay I am selling my 700r4 that I planned on putting in a custom truck I am building. I have decided to go manual. I have a lot of time and money invested in this setup, so hopefully somebody will get a good deal. To start off, the tranny is the more desirable later year 700r4 which came out of an early 90's caprice. It is has been completely rebuilt and has no miles on it since the rebuild. It has just been sitting in my rolling chassis. It has been epoxy primed and topcoated with a gloss black urethane. Next is the Torque Converter. Its a BDR converter which is a custom builder of converters, ie made to order. It has a stall speed of 2400/2800. Next is a TCI Flexplate part # 399773. Last are some items from Bowtie Overdrives. I purchased their Lockup wiring kit. Here is the link: http://www.bowtieoverdrives.com/cata...php?ITEMID=332 I also purchased their TV Made Ez system. Here is the link: http://www.bowtieoverdrives.com/cata...php?ITEMID=214 All these items are new, never been used. What you see in the pictures is how its sat since purchased. The stock dipstick is also included as are ARP fasteners to connect the flexplate to the TC. If you have any questions, please let me know and I will try to answer. Asking $950 for everything. Last edited by jlaird; 09-30-2009 at 06:44 PM.

09-20-2009, 04:33 PM	#2
bac1755 Registered User Join Date: Jan 2009 Location: Denison, Texas Posts: 245	Re: 700r4 package on ebay everytime something like this comes up I dont have the money right away... __________________ 1971 GMC 1972 Small Blocked DATSUN 240Z Dads old car

09-20-2009, 11:43 PM	#7
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 700r4 package on ebay Bump for you. __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-22-2009, 07:09 AM	#8
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: 700r4 package on ebay Thanks VA72C10!

09-22-2009, 05:32 PM	#9
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 700r4 package on ebay No problem __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-28-2009, 10:06 PM	#10
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: 700r4 package on ebay ttt, anybody?

09-28-2009, 11:43 PM	#11
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 700r4 package on ebay I've bought the bag brackets Jlaird sells on ebay and just recently bought his frame mounted brake bracket and some air bag fittings. Shipped it all fast and packaged well. Nice guy to do business with! __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-29-2009, 12:01 AM	#12
budder71 Registered User Join Date: Jul 2009 Location: Hattiesburg Mississippi Posts: 697	Re: 700r4 package on ebay will this set up work for a 71 GMC JIMMY 4WD ?

09-30-2009, 10:30 AM	#16
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: 700r4 package on ebay I'm really interested in this setup. Do you think it will hold 630 HP/650 TQ? I've got a 383 with a supercharger. Any ideas on shipping to 32571? Let me know. R/ __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

10-09-2009, 12:24 PM	#18
C10Sim Registered User Join Date: Oct 2008 Location: Houston, Tx Posts: 469	Re: 700r4 package on ebay Is a lockup or non lockup? 27 or 30 spline? Did you buy the stall or did it come with purchase from the previous owner? Thanks, Simon __________________ 1968 Chevy Pickup http://67-72chevytrucks.com/vboard/s...d.php?t=321717 1959 Chevy Apache 3100 SWB Big Window http://67-72chevytrucks.com/vboard/s...d.php?t=597069

10-25-2009, 01:15 PM	#20
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: 700r4 package on ebay reduced to $850. Any takers??

10-25-2009, 02:56 PM	#22
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: 700r4 package on ebay since you currently have an automatic, not too much. Your th350 crossmember will work with the 700r4. Do you have a long or short tailshaft on your turbo 350? If a short, your driveshaft should bolt right up. Do you have column or floor shift?

10-25-2009, 06:01 PM	#23
lowdownstar big guy Join Date: Jun 2008 Location: mass Posts: 824	Re: 700r4 package on ebay what rear end gears where you going to be running with this trany? not sure on the stall speed. Thanks Ray

10-25-2009, 08:00 PM	#24
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: 700r4 package on ebay 3.73's

10-25-2009, 08:42 PM	#25
budder71 Registered User Join Date: Jul 2009 Location: Hattiesburg Mississippi Posts: 697	Re: 700r4 package on ebay your not coming through Mississippi anytime soon are you ?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.