VA 6 Lug Cross drilled Disc conversion w/ drop spindles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 09-22-2009, 10:37 PM

600 FINAL OFFER plus shipping..... or if you pickup that is free I'll even deliver around VA for a very small fee. Will include brake lines and dust shields now.

For an extra 125 plus shipping I will include 2" front and 5" rear lowering springs.

These were sold and paid for then when I went to ship them I found out I had lost a box so they are back up for sale.... Made to fit 67-70 1/2 ton chevy or GMC trucks and convert them from manual to disc brakes. http://www.earlyclassic.com/home.aspx
Part #903-6770-DBC6CD runs 999 new plus shipping

Comes Complete With 2 1/2" drop spindles, Calipers, Pads, 6 lug HD Rotors (CROSS DRILLED!!!), Bearings, Seals, Dust Shields, Dust Caps, Castle Nuts, Slotted Washers, Banjo Bolts, brake lines, and All necessary Hardware and Brackets. Kit originally came with master cylinder and prop valve but I lost that box somehow. I took that into consideration with the price as you can get the master and prop for under 100.

Asking 700 FIRM (NOW 600!!!) Plus shipping. Everything is new in boxes. Save 300 off on new parts. I will accept paypal, but you MUST cover the fees. Shipping will be high due to weight...figure roughly 120-150 for shipping. I will deliver to VA/WV and surrounding states for a small fee.

No actual pictures as parts are in the boxes. Note that the rotors are cross drilled. I can take pictures of the rotors if needed as I have opened that box to look at them. Picture below is from ECE.

VA72C10 · 09-23-2009, 02:54 PM

Ttt

VA72C10 · 09-24-2009, 11:58 PM

ttt

VA72C10 · 09-25-2009, 02:16 AM

I will also thow in ONLY WITH THE KIT two NEW pair (4) drop springs. 2" front, 5" rear for $150 shipped extra.

VA72C10 · 09-26-2009, 03:10 AM

ttt

VA72C10 · 09-28-2009, 10:52 PM

ttt

VA72C10 · 09-29-2009, 11:52 AM

TTT....600 plus shipping. Save a TON!

VA72C10 · 10-02-2009, 02:40 PM

ttt...

silver7 · 10-02-2009, 03:05 PM

I haven't researched your specific kit but I am looking for a rear disc conversion kit for a 71 chevy C10. Any chance this would work?

VA72C10 · 10-02-2009, 03:18 PM

Quote:

Originally Posted by silver7

I haven't researched your specific kit but I am looking for a rear disc conversion kit for a 71 chevy C10. Any chance this would work?

Nope, this is spindles and setup for the front. Plus, a 71 chevy should have 5 lug and this is 6. Try blackbirds, glock's bracket on here, or mcgaughey's has a big brake front and rear kit...

paps69 · 10-02-2009, 04:56 PM

I am interested again!!!!! Sent you a P.M.

Hottrucks · 10-02-2009, 05:05 PM

someone buy this it's kiling me to see it and not have the ching

VA72C10 · 10-02-2009, 06:39 PM

pm replied

silver7 · 10-02-2009, 09:27 PM

I can count, my C10 is 6 lug. Happens to be a converted 4x4. Thanks

VA72C10 · 10-02-2009, 09:31 PM

Quote:

Originally Posted by silver7

I can count, my C10 is 6 lug. Happens to be a converted 4x4. Thanks

Sorry if I offended you at all...that's why I said should be 5 lug...didn't want you to get the wrong thing...

silver7 · 10-02-2009, 10:00 PM

No problem. Thanks.

VA72C10 · 10-03-2009, 12:55 AM

Working on a deal with paps69....

VA72C10 · 10-13-2009, 11:46 PM

ttt...getting brake hoses in another kit so it will be a complete front end kit. Just supply your preferred master cylinder & prop valve

VA72C10 · 10-15-2009, 10:37 AM

Ttt

VA72C10 · 10-15-2009, 10:17 PM

ttt...paps passed to buy other parts he needs first....these are available.

72BlckButy · 10-15-2009, 10:45 PM

$600 guy's... are you kidding me?

This is the STEAL of the year!!!!!

VA72C10 · 10-15-2009, 11:54 PM

Quote:

Originally Posted by 72BlckButy

$600 guy's... are you kidding me?

This is the STEAL of the year!!!!!

Thanks...it seems it's hard to give things away right now...

Hottrucks · 10-16-2009, 08:02 AM

your killing me If I wasn't in the same boat you are I would be all over this......

72BlckButy · 10-16-2009, 08:34 AM

Again this is the same as a $999 kit from ECE which doesn't include shipping. Someone can walk away from this deal with spending less than the kit sells for, shipped!

This is tempting even me...

Friday morning bump!

**70STOVEBOLT** · 10-16-2009, 05:03 PM

How much without the spindles?

09-22-2009, 10:37 PM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	6 Lug Cross drilled Disc conversion w/ drop spindles 600 FINAL OFFER plus shipping..... or if you pickup that is free I'll even deliver around VA for a very small fee. Will include brake lines and dust shields now. For an extra 125 plus shipping I will include 2" front and 5" rear lowering springs. These were sold and paid for then when I went to ship them I found out I had lost a box so they are back up for sale.... Made to fit 67-70 1/2 ton chevy or GMC trucks and convert them from manual to disc brakes. http://www.earlyclassic.com/home.aspx Part #903-6770-DBC6CD runs 999 new plus shipping Comes Complete With 2 1/2" drop spindles, Calipers, Pads, 6 lug HD Rotors (CROSS DRILLED!!!), Bearings, Seals, Dust Shields, Dust Caps, Castle Nuts, Slotted Washers, Banjo Bolts, brake lines, and All necessary Hardware and Brackets. Kit originally came with master cylinder and prop valve but I lost that box somehow. I took that into consideration with the price as you can get the master and prop for under 100. Asking 700 FIRM (NOW 600!!!) Plus shipping. Everything is new in boxes. Save 300 off on new parts. I will accept paypal, but you MUST cover the fees. Shipping will be high due to weight...figure roughly 120-150 for shipping. I will deliver to VA/WV and surrounding states for a small fee. No actual pictures as parts are in the boxes. Note that the rotors are cross drilled. I can take pictures of the rotors if needed as I have opened that box to look at them. Picture below is from ECE. __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 10-17-2009 at 01:17 PM. Reason: correct confusing wording about shipping

09-23-2009, 02:54 PM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 6 Lug Cross drilled Disc conversion w/ drop spindles Ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-24-2009, 11:58 PM	#3
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 6 Lug Cross drilled Disc conversion w/ drop spindles ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-25-2009, 02:16 AM	#4
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 6 Lug Cross drilled Disc conversion w/ drop spindles I will also thow in ONLY WITH THE KIT two NEW pair (4) drop springs. 2" front, 5" rear for $150 shipped extra. __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-26-2009, 03:10 AM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 6 Lug Cross drilled Disc conversion w/ drop spindles ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-28-2009, 10:52 PM	#6
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 6 Lug Cross drilled Disc conversion w/ drop spindles ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-29-2009, 11:52 AM	#7
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 6 Lug Cross drilled Disc conversion w/ drop spindles TTT....600 plus shipping. Save a TON! __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-02-2009, 02:40 PM	#8
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 6 Lug Cross drilled Disc conversion w/ drop spindles ttt... __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-02-2009, 03:05 PM	#9
silver7 Registered User Join Date: Jul 2009 Location: High Point, NC Posts: 613	Re: 6 Lug Cross drilled Disc conversion w/ drop spindles I haven't researched your specific kit but I am looking for a rear disc conversion kit for a 71 chevy C10. Any chance this would work?

10-02-2009, 04:56 PM	#11
paps69 Registered User Join Date: Oct 2006 Location: Guston, Ky Posts: 79	Re: 6 Lug Cross drilled Disc conversion w/ drop spindles I am interested again!!!!! Sent you a P.M. __________________ IF A FELLA DOESN'T USE HIS HEAD....... HE MIGHT AS WELL HAVE TWO BUTTS 1969 C10 LWB "Granpaps Truck" (Project) 2000 K3500 Crew Cab LWB (Farm Truck) 2007 Chevy 1500 Crew Cab 5.3 (Daily Driver)

10-02-2009, 05:05 PM	#12
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: 6 Lug Cross drilled Disc conversion w/ drop spindles someone buy this it's kiling me to see it and not have the ching __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

10-02-2009, 06:39 PM	#13
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 6 Lug Cross drilled Disc conversion w/ drop spindles pm replied __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-02-2009, 09:27 PM	#14
silver7 Registered User Join Date: Jul 2009 Location: High Point, NC Posts: 613	Re: 6 Lug Cross drilled Disc conversion w/ drop spindles I can count, my C10 is 6 lug. Happens to be a converted 4x4. Thanks

10-02-2009, 10:00 PM	#16
silver7 Registered User Join Date: Jul 2009 Location: High Point, NC Posts: 613	Re: 6 Lug Cross drilled Disc conversion w/ drop spindles No problem. Thanks.

10-03-2009, 12:55 AM	#17
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 6 Lug Cross drilled Disc conversion w/ drop spindles Working on a deal with paps69.... __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

10-13-2009, 11:46 PM	#18
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 6 Lug Cross drilled Disc conversion w/ drop spindles ttt...getting brake hoses in another kit so it will be a complete front end kit. Just supply your preferred master cylinder & prop valve __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-15-2009, 10:37 AM	#19
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 6 Lug Cross drilled Disc conversion w/ drop spindles Ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-15-2009, 10:17 PM	#20
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 6 Lug Cross drilled Disc conversion w/ drop spindles ttt...paps passed to buy other parts he needs first....these are available. __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-15-2009, 10:45 PM	#21
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 6 Lug Cross drilled Disc conversion w/ drop spindles $600 guy's... are you kidding me? This is the STEAL of the year!!!!! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

10-16-2009, 08:02 AM	#23
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: 6 Lug Cross drilled Disc conversion w/ drop spindles your killing me If I wasn't in the same boat you are I would be all over this......

10-16-2009, 08:34 AM	#24
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 6 Lug Cross drilled Disc conversion w/ drop spindles Again this is the same as a $999 kit from ECE which doesn't include shipping. Someone can walk away from this deal with spending less than the kit sells for, shipped! This is tempting even me... Friday morning bump! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 10-16-2009 at 08:38 AM.

10-16-2009, 05:03 PM	#25
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,268	Re: 6 Lug Cross drilled Disc conversion w/ drop spindles How much without the spindles? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

Register or Log In To remove these advertisements.