Tool Compartment- Optional on C10? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

phailing101 · 09-25-2009, 06:29 PM

Hey guys- I can't find this info anywhere so I'm looking for some help.

Was the tool compartment (not sure official term for it) optional on the chevy c10s or only on the C20s?

You don't seem to see them too often in any case- was it a rare option?

Thanks for the info!

Longhorn Man · 09-25-2009, 07:14 PM

pretty rare, no real numbers ever given, but if memory serves, it fell in the less than 2%.
It was avalible on all long wheel base (or longhorn) fleetside trucks starting in 1970.
Finding a nice rustfree one, next to impossible, and when you do see one, it's gonna cost you.

phailing101 · 09-25-2009, 08:03 PM

Just to be clear- they were therefore available on both 1/2 tons and 3/4 ton models?

My understanding was that the longhorns were 3/4 tons. But they were also available on the 1/2 ton long boxes?...or am I confused.

Thanks!

**Hart_Rod** · 09-25-2009, 08:36 PM

Quote:

Originally Posted by phailing101

Just to be clear- they were therefore available on both 1/2 tons and 3/4 ton models?

My understanding was that the longhorns were 3/4 tons. But they were also available on the 1/2 ton long boxes?...or am I confused.

Thanks!

Just had to be a LWB, I don't think it mattered whether C10/C20.

Longhorn Man · 09-25-2009, 08:37 PM

1/2 ton, 3/4 ton, and one ton fleetsides.The longhorn was built on a one ton frame which is longer which required an 8 1/2 foot long bed. They came in both C/20 and C/30.
http://www.longhorntrucks.freeservers.com/ <---- my site will explain it better if you are interested.

09-25-2009, 06:29 PM	#1
phailing101 Registered User Join Date: Sep 2009 Location: Regina, Saskatchewan Posts: 2	Tool Compartment- Optional on C10? Hey guys- I can't find this info anywhere so I'm looking for some help. Was the tool compartment (not sure official term for it) optional on the chevy c10s or only on the C20s? You don't seem to see them too often in any case- was it a rare option? Thanks for the info!

09-25-2009, 07:14 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Tool Compartment- Optional on C10? pretty rare, no real numbers ever given, but if memory serves, it fell in the less than 2%. It was avalible on all long wheel base (or longhorn) fleetside trucks starting in 1970. Finding a nice rustfree one, next to impossible, and when you do see one, it's gonna cost you.

09-25-2009, 08:03 PM	#3
phailing101 Registered User Join Date: Sep 2009 Location: Regina, Saskatchewan Posts: 2	Re: Tool Compartment- Optional on C10? Just to be clear- they were therefore available on both 1/2 tons and 3/4 ton models? My understanding was that the longhorns were 3/4 tons. But they were also available on the 1/2 ton long boxes?...or am I confused. Thanks!

09-25-2009, 08:37 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Tool Compartment- Optional on C10? 1/2 ton, 3/4 ton, and one ton fleetsides.The longhorn was built on a one ton frame which is longer which required an 8 1/2 foot long bed. They came in both C/20 and C/30. http://www.longhorntrucks.freeservers.com/ <---- my site will explain it better if you are interested.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.