OH Parting 72 LWB Chevy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**j_cst_10** · 09-28-2009, 08:39 PM

I am keeping the engine/transmission, clutch pedal/linkage, disc brakes, rear end, and patch panels I am cutting from the bed, cab, and fenders (I may be forgetting more). 72 Custom/10, 350/3spd, pwr steering, LWB.

The truck is complete down to every nut, such as Custom/10 badges, tail light trim, headlight trim, brake pedal assembly, power steering box, etc. I am looking to be fair with pricing and will only charge actual shipping charges. The truck is complete minus my parts so I am not going to price out every single item.

If anyone needs anything I can try and take pics and give pricing. Shipping will be actual so estimate weight and use a general mail carrier to approximate shipment. Zip Code 44060 Mentor, OH

I can throw a few prices on a couple parts if the thread does not meet the rules. If it becomes too much of a pain in the butt I am just going to call the junk yard up. Also might be able to give a good price if someone wants the whole thing. Valid title in my name. Thanks guys.

Hood hinges $25
Horns $15
Engine mount cradles SBC $15
PWR steering box $20
Brake pedal assembly $25
Rear aluminum tail light trim $15
Hood $35 solid, come and get it
67 painted bumper $35 come and get it
Battery Tray $25
Instrument panel $20 all there and working to my knowledge
Side markers LH and RH $20
350/8 badges are $20-pretty nice shape just needs cleaned

1968SWBBigBlock · 09-28-2009, 09:11 PM

Will you have extra bed floor to sell?
If so I would be interested.

**j_cst_10** · 09-28-2009, 09:37 PM

Sorry, the bed is pretty rusty. Here are some prices for some basic parts.

Horns $15
Engine mount cradles SBC $15
PWR steering box $20
Brake pedal assembly $25
Rear aluminum tail light trim $15
Hood $35 solid, come and get it
67 painted bumper $35 come and get it
Battery Tray $25
Instrument panel $20 all there and working to my knowledge
Side markers LH and RH $20

Also, good title with carcass purchase or goes to scrap yard.

Anybody need anything else? I will try and be fast as I can but I work until 4:30.

Chada · 09-28-2009, 09:57 PM

I would be interested in the heater control box if its non ac.

Stew215 · 09-28-2009, 10:11 PM

pm about emblem and arm rest

*vegaschevy* · 09-28-2009, 10:22 PM

driver fender and grill assembly please...

coast2coast · 09-29-2009, 08:39 AM

Can I get pics, price, and condition of the doors and the wing windows.

**70STOVEBOLT** · 09-29-2009, 09:18 AM

Deluxe side markers, shipping to 46562, business address.

**70STOVEBOLT** · 09-29-2009, 09:19 AM

Also the radio antenna.

**70STOVEBOLT** · 09-29-2009, 09:21 AM

I may also be interested in the tailgate. So that is: deluxe side markers, antenna, tailgate.
Thanks,
Mark

*Puropedo* · 09-29-2009, 12:05 PM

I am interested in the front grill if Vegaschevy passes on it, please post price with shipping to 93907

**lks dcvn** · 09-29-2009, 12:15 PM

I am also curious to hear the condition/price of the tailgate when you have a chance - if Stovebolt passes of course.

I have several buddies coming from Cleveland to Toledo in 2 weeks that could pick it up from you and bring it this way.

ilovemy72 · 09-29-2009, 01:34 PM

i call thirds on the grill if all others pass

**j_cst_10** · 09-29-2009, 05:00 PM

I just got home (9/29) so I will update with some pictures and pricing later tonight. I will not be able to reply until 4-5pm everyday so I appreciate the patience.

Thanks

**j_cst_10** · 09-29-2009, 08:06 PM

Alright.

chada: heater box has a few screw holes through the front of it. Fair condition, functional only but not a looker-junk

stew: arm rests are chewed up, I wouldn't use them. The bow tie will stay with the grill for now.

vegas chevy: The grill is in good condition just needs cleaned. Has one small crack in inner grill but doesn't go through. I don't want and try to ship this thing so it is pick up only at this time---$125 for both inner/outer/headlight trim/hood latch.

70 stovebolt-antenna is spoken for, side marker lights (4) $15 plus shipping. Tailgait is bowed and crappy.

coast 2 coast: I will be taking patch panels from fenders. side window glass is intact.

350/8 badges are $20-pretty nice shape just needs cleaned.

Chada · 09-29-2009, 08:08 PM

Thanks for checking.

**j_cst_10** · 09-29-2009, 08:15 PM

I would be willing to cut patch panels for anybody but I am taking the standard normally rusty areas. Let me know though.

Stew215 · 09-29-2009, 08:38 PM

If you cutting patches i would like to know how the driver door bottom left corner is ... and also the bottom right corner on the driver fender... (If you are not taking them yourself )... let me know and i can give you exact size patch i need ... both are like 6x6

-thank you

1968CHEVYC10 · 09-29-2009, 08:48 PM

how much for the wiper/washer switch?

**j_cst_10** · 09-29-2009, 08:50 PM

I will get back to you stew15, I need to take a look at my other truck and see what I need. If available, I will let you know.

Judoman · 09-29-2009, 08:54 PM

How much to ship PS gearbox to 90808?

Judoman · 09-29-2009, 08:56 PM

How much to ship PS gearbox to 90808? Does it look like it leaks?

**j_cst_10** · 09-29-2009, 09:15 PM

Looks like around $20 Judoman.

Does not appear to leak.

**j_cst_10** · 09-29-2009, 09:19 PM

SHIPPING ESTIMATES: USE FED EX, ESTIMATE WEIGHT, USE 44060 ZIP CODE (USE SMALL FUDGE FACTOR FOR WEIGHT ESTIMATED PLUS ANY SHIPPING MATERIAL PURCHASED).

IF STILL INTERESTED I WILL GIVE YOU A CONCRETE NUMBER

LINK: http://www.fedex.com/ratefinder/home?cc=US&language=en

THANKS

fbaker455 · 09-29-2009, 09:24 PM

do you have any of these: gas pedal w/rod and cable, also brake booster, master, proportion valve disc/drum?

frank

09-28-2009, 08:39 PM	#1
j_cst_10 Senior Member Join Date: Nov 2008 Location: Cleveland, OH Posts: 587	Parting 72 LWB Chevy I am keeping the engine/transmission, clutch pedal/linkage, disc brakes, rear end, and patch panels I am cutting from the bed, cab, and fenders (I may be forgetting more). 72 Custom/10, 350/3spd, pwr steering, LWB. The truck is complete down to every nut, such as Custom/10 badges, tail light trim, headlight trim, brake pedal assembly, power steering box, etc. I am looking to be fair with pricing and will only charge actual shipping charges. The truck is complete minus my parts so I am not going to price out every single item. If anyone needs anything I can try and take pics and give pricing. Shipping will be actual so estimate weight and use a general mail carrier to approximate shipment. Zip Code 44060 Mentor, OH I can throw a few prices on a couple parts if the thread does not meet the rules. If it becomes too much of a pain in the butt I am just going to call the junk yard up. Also might be able to give a good price if someone wants the whole thing. Valid title in my name. Thanks guys. Hood hinges $25 Horns $15 Engine mount cradles SBC $15 PWR steering box $20 Brake pedal assembly $25 Rear aluminum tail light trim $15 Hood $35 solid, come and get it 67 painted bumper $35 come and get it Battery Tray $25 Instrument panel $20 all there and working to my knowledge Side markers LH and RH $20 350/8 badges are $20-pretty nice shape just needs cleaned Last edited by j_cst_10; 09-29-2009 at 09:25 PM.

09-28-2009, 09:11 PM	#2
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Parting 72 LWB Chevy Will you have extra bed floor to sell? If so I would be interested. __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

09-28-2009, 09:37 PM	#3
j_cst_10 Senior Member Join Date: Nov 2008 Location: Cleveland, OH Posts: 587	Re: Parting 72 LWB Chevy Sorry, the bed is pretty rusty. Here are some prices for some basic parts. Horns $15 Engine mount cradles SBC $15 PWR steering box $20 Brake pedal assembly $25 Rear aluminum tail light trim $15 Hood $35 solid, come and get it 67 painted bumper $35 come and get it Battery Tray $25 Instrument panel $20 all there and working to my knowledge Side markers LH and RH $20 Also, good title with carcass purchase or goes to scrap yard. Anybody need anything else? I will try and be fast as I can but I work until 4:30. Last edited by j_cst_10; 09-28-2009 at 09:37 PM.

09-28-2009, 09:57 PM	#4
Chada Registered User Join Date: Jun 2009 Location: Midlothian, Virginia Posts: 56	Re: Parting 72 LWB Chevy I would be interested in the heater control box if its non ac.

09-28-2009, 10:11 PM	#5
Stew215 Registered User Join Date: Sep 2009 Location: Levittown , PA Posts: 55	Re: Parting 72 LWB Chevy pm about emblem and arm rest __________________ 72 shortbed 396-sold 74 blazer 5.3 ls swap under construction

09-28-2009, 10:22 PM	#6
vegaschevy Account Suspended Join Date: May 2009 Location: las vegas nv Posts: 1,493	Re: Parting 72 LWB Chevy driver fender and grill assembly please...

09-29-2009, 08:39 AM	#7
coast2coast Registered User Join Date: Oct 2006 Location: Strafford Missouri Posts: 217	Re: Parting 72 LWB Chevy Can I get pics, price, and condition of the doors and the wing windows.

09-29-2009, 09:18 AM	#8
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,254	Re: Parting 72 LWB Chevy Deluxe side markers, shipping to 46562, business address. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-29-2009, 09:19 AM	#9
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,254	Re: Parting 72 LWB Chevy Also the radio antenna. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-29-2009, 09:21 AM	#10
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,254	Re: Parting 72 LWB Chevy I may also be interested in the tailgate. So that is: deluxe side markers, antenna, tailgate. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-29-2009, 12:05 PM	#11
Puropedo Account Suspended Join Date: Nov 2008 Location: Prunedale California Posts: 782	Re: Parting 72 LWB Chevy I am interested in the front grill if Vegaschevy passes on it, please post price with shipping to 93907

09-29-2009, 12:15 PM	#12
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,339	Re: Parting 72 LWB Chevy I am also curious to hear the condition/price of the tailgate when you have a chance - if Stovebolt passes of course. I have several buddies coming from Cleveland to Toledo in 2 weeks that could pick it up from you and bring it this way.

09-29-2009, 01:34 PM	#13
ilovemy72 Registered User Join Date: Sep 2009 Location: OKC Oklahoma Posts: 2	Re: Parting 72 LWB Chevy i call thirds on the grill if all others pass

09-29-2009, 05:00 PM	#14
j_cst_10 Senior Member Join Date: Nov 2008 Location: Cleveland, OH Posts: 587	Re: Parting 72 LWB Chevy I just got home (9/29) so I will update with some pictures and pricing later tonight. I will not be able to reply until 4-5pm everyday so I appreciate the patience. Thanks

09-29-2009, 08:06 PM	#15
j_cst_10 Senior Member Join Date: Nov 2008 Location: Cleveland, OH Posts: 587	Re: Parting 72 LWB Chevy Alright. chada: heater box has a few screw holes through the front of it. Fair condition, functional only but not a looker-junk stew: arm rests are chewed up, I wouldn't use them. The bow tie will stay with the grill for now. vegas chevy: The grill is in good condition just needs cleaned. Has one small crack in inner grill but doesn't go through. I don't want and try to ship this thing so it is pick up only at this time---$125 for both inner/outer/headlight trim/hood latch. 70 stovebolt-antenna is spoken for, side marker lights (4) $15 plus shipping. Tailgait is bowed and crappy. coast 2 coast: I will be taking patch panels from fenders. side window glass is intact. 350/8 badges are $20-pretty nice shape just needs cleaned. Last edited by j_cst_10; 09-29-2009 at 08:08 PM.



Register or Log In To remove these advertisements.

09-29-2009, 08:08 PM	#16
Chada Registered User Join Date: Jun 2009 Location: Midlothian, Virginia Posts: 56	Re: Parting 72 LWB Chevy Thanks for checking.

09-29-2009, 08:15 PM	#17
j_cst_10 Senior Member Join Date: Nov 2008 Location: Cleveland, OH Posts: 587	Re: Parting 72 LWB Chevy I would be willing to cut patch panels for anybody but I am taking the standard normally rusty areas. Let me know though.

09-29-2009, 08:38 PM	#18
Stew215 Registered User Join Date: Sep 2009 Location: Levittown , PA Posts: 55	Re: Parting 72 LWB Chevy If you cutting patches i would like to know how the driver door bottom left corner is ... and also the bottom right corner on the driver fender... (If you are not taking them yourself )... let me know and i can give you exact size patch i need ... both are like 6x6 -thank you __________________ 72 shortbed 396-sold 74 blazer 5.3 ls swap under construction

09-29-2009, 08:48 PM	#19
1968CHEVYC10 Registered User Join Date: Aug 2009 Location: Tomball, TX Posts: 578	Re: Parting 72 LWB Chevy how much for the wiper/washer switch? __________________ '68 C10 LWB 6.2NA/NP833 3.73's

09-29-2009, 08:50 PM	#20
j_cst_10 Senior Member Join Date: Nov 2008 Location: Cleveland, OH Posts: 587	Re: Parting 72 LWB Chevy I will get back to you stew15, I need to take a look at my other truck and see what I need. If available, I will let you know.

09-29-2009, 08:54 PM	#21
Judoman Registered User Join Date: Jun 2009 Location: Long Beach, California Posts: 19	Re: Parting 72 LWB Chevy How much to ship PS gearbox to 90808?

09-29-2009, 08:56 PM	#22
Judoman Registered User Join Date: Jun 2009 Location: Long Beach, California Posts: 19	Re: Parting 72 LWB Chevy How much to ship PS gearbox to 90808? Does it look like it leaks?

09-29-2009, 09:15 PM	#23
j_cst_10 Senior Member Join Date: Nov 2008 Location: Cleveland, OH Posts: 587	Re: Parting 72 LWB Chevy Looks like around $20 Judoman. Does not appear to leak. Last edited by j_cst_10; 09-29-2009 at 09:20 PM.

09-29-2009, 09:19 PM	#24
j_cst_10 Senior Member Join Date: Nov 2008 Location: Cleveland, OH Posts: 587	Re: Parting 72 LWB Chevy SHIPPING ESTIMATES: USE FED EX, ESTIMATE WEIGHT, USE 44060 ZIP CODE (USE SMALL FUDGE FACTOR FOR WEIGHT ESTIMATED PLUS ANY SHIPPING MATERIAL PURCHASED). IF STILL INTERESTED I WILL GIVE YOU A CONCRETE NUMBER LINK: http://www.fedex.com/ratefinder/home?cc=US&language=en THANKS Last edited by j_cst_10; 09-29-2009 at 09:20 PM.

09-29-2009, 09:24 PM	#25
fbaker455 Registered User Join Date: Sep 2009 Location: mt.vernon ky Posts: 9	Re: Parting 72 LWB Chevy do you have any of these: gas pedal w/rod and cable, also brake booster, master, proportion valve disc/drum? frank __________________ rides 1982 cutlass 455/350 8.5 3:73 posi (442 clone) 1985 442 350/2004r 8.5 3:73 dailey driver 1969 c10 in progress for work truck

Register or Log In To remove these advertisements.