67 C-10? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TimoL · 05-15-2002, 02:03 AM

Hello from Finland!

Could somebody help me to find out what my truck´s model exactly is...
So I just bought a truck which should be a chevrolet 1967 C-10 ½ tons, but I'm not sure. Here is the info from the truck's ID -plate:

G.M.C. TRUCK
MAXIMUM GVW RATING
5000
VEHICLE IDENTIFICATION NUMBER
CS1590D PC10812A
DD

Original (maybe) Florida truck. I tried to decode it, but found some problems with the ID number. Now Truck have 454 TH350 and 10 bolt.

Any help highly appreciated!

Thanks in advance

Timo Luoma

PS. I need the info because I have to have a one kind of type approval when register it to Finland.

Dim · 05-15-2002, 03:02 AM

well with my limited knowledge of the ID # decoding process. I gather that you have a 69 Panel Truck...I'm confused and going to bed.
Maybe you misread the numbers? or am'I way out there lost and confused?
A 67 C10 would be something like:
CS147A100099 So it's a 67 pickup made in Atlanta and it was the 99th one. right?

D!m

------------------
BlueStreak 69 Chevy C10 -
(Under Construction)
pos_8@hotmail.com

TimoL · 05-15-2002, 05:09 AM

Thanks for the reply Dim. Right and I'm also confused!
Numbers are correct but I found these numbers from the plate which was attached on the drivers door pillar. Is it the right place? I just noticed that there was a remark on the VIN decoder site (The Model Number is located on the inside of the glove box door) - I didn't know this yesterday and only picked up the numbers from the door pillar. Should these numbers match?
The Florida guy who sold this truck to my friend said that it is a 67 and all the customs papers says 1967 etc., but maybe they are wrong or then I just have to find the right numbers...opinions and info, please

Timo

Longhorn Man · 05-15-2002, 05:12 AM

It is a GMC not a Chevy. The decode is not the same.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
E-mail longhornmail@yahoo.com
My name is Andy...not Randy...I'm in Ohio...Not Illinois...close enough?
Columbus Ohio

O'l Buck · 05-16-2002, 01:18 AM

the vin plate should be located on the left door pillar, just below the latch plate, or above it, i'd have to look, sorry, i can't help with decode, does the option sticker on the glovebox door give any helpful info, such as matching vin # on pillar?

------------------
"In the words of Motley Crue, This will always be my home sweet home"

Ol' Buck: '72 Chevy 1/2T 4x4 shortbox stepside 350/350auto on '84
ralleys and 31/10.5s

Angel girl: 67 Cutlass convertible
330, 3spd stick

Greener: 90 GMC Jimmy
350/auto
Chad Stephens
Orleans,NE

no name yet: 72 442 under serious construction
my site:
http://communities.msn.com/Beastonabudget/homepage

TimoL · 05-16-2002, 01:55 AM

Thanks for the replies!

Maybe she really is a GMC but then she has a Chevy's front fenders and hood (Looks just like a Chevy). It's a possibility because she has been customized quite much by the guys is Florida.

Yep the VIN plate was on the left door pillar but as you can already guess there was no option sticker left on the glove box door. Is there any special features in a GMC when compared in a Chevy?

This is what I managed to find out from the doors plate (I used 67-69 GMC Model number Codes -> http://www.gmcpaulstruckparts.com/67-72_gmc.htm):

C=2 wheel drive
S=Six cylinder gas
1=½ ton
OD=Wide Side
P=Pontiac
C=1967

I just joined here yesterday and I don't really know much about these trucks - this is my first adventure to the world of trucks.

THANKS FOR THE GOOD SITE AND OF COURSE THANK YOU ALL for helping the unknowing foreigner!

Timo

**BIG ORANGE** · 05-16-2002, 09:19 AM

Does it have sidemarker lites on the fenders?
The 67's didnt have them.

------------------
1971 chevy suburban (BIG ORANGE)
1970,68,90 swb Little BUCKS one day
67/72 truck parts bought/sold
LIFE IS GOOD,THANK GOD FOR IT!

busterwivell · 05-16-2002, 02:54 PM

Thanks for making this an international website. Fire away with questions, these guys (and gals) have all the answers.
Bill - Tucson

------------------
56 Studebaker 2 dr Wagon
66 Chevelle 2 dr 4 speed
71 C30 Longhorn
86 Monte Carlo SS
96 Tahoe

*Fast68Chevy* · 05-16-2002, 04:58 PM

guys, that is a GMC VIN code, they do not decode same way as a Chevy VIN code........

wlecome to the forum,.

------------------
Randy- Lincoln, IL
randy@ccaonline.com 2177353230
*many GM parts bought, traded, or sold -am parting out: '81 Cutlass Supreme and 84 SE Firebird T5 3.73

current fleet: -71 C-10 350/CH465/3.07- assembling currently
-90 Cavalier/2.2/sky blue, driver #2
-84 Z28 5.0L/700R4/3.73 daily driver #1
-'90 Corsica 3.1L and '82 purple Trans Am- storing *Paint is overrated* © RSS Enterprises 2000

Longhorn Man · 05-16-2002, 10:24 PM

Other than the grill, and trim, the only differance on the GMC trucks was a small handfull of options. They had some that the chevys did not.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
E-mail longhornmail@yahoo.com
My name is Andy...not Randy...I'm in Ohio...Not Illinois...close enough?
Columbus Ohio

TimoL · 05-17-2002, 03:52 AM

I got a copy of CERTIFICATE OF TITLE and that confirms that it's a GMC from year 1967.

Does somebody know Carl Lee McCloud from Sparta Michican? He is the former owner of my truck.

No side marker lites on the fenders. This kind of trucks are quite rare in Finland and now I'm a happy owner of one!!

I put some pics on the net when I have decent ones.

Timo

Blue68 · 05-17-2002, 11:29 AM

You can also look at the frame rail on the driver's side beside the engine. The vin is stamped on the top of the frame. Just one more possible piece of the puzzle.

------------------
'68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades.

Way too much money and time..But it's a hobby.

TimoL · 05-21-2002, 01:39 AM

Truck is now almost registered in Finland but the Finnish authorities created a new problem -> truck is a original 6 cylinder and now has a 454, so I have to find out all the technical specs of the truck ( axle masses, measures etc.) Is there anything online or could someone just send me the specs via email? However they accept Chevy specs too...(it's a miracle!!

Timo

TimoL · 05-22-2002, 01:20 AM

The registration is now done and again thanks for your help!

Pics are coming when I have chance and time to take them!

Now I'm just going to enjoy the ride of my BigBlock GMC truck...

Timo

05-16-2002, 01:18 AM	#5
O'l Buck Recovering Truck Driver Join Date: Mar 2002 Location: Orleans, NE USA Posts: 1,883	the vin plate should be located on the left door pillar, just below the latch plate, or above it, i'd have to look, sorry, i can't help with decode, does the option sticker on the glovebox door give any helpful info, such as matching vin # on pillar? ------------------ "In the words of Motley Crue, This will always be my home sweet home" Ol' Buck: '72 Chevy 1/2T 4x4 shortbox stepside 350/350auto on '84 ralleys and 31/10.5s Angel girl: 67 Cutlass convertible 330, 3spd stick Greener: 90 GMC Jimmy 350/auto Chad Stephens Orleans,NE no name yet: 72 442 under serious construction my site: http://communities.msn.com/Beastonabudget/homepage __________________ 67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska

05-16-2002, 09:19 AM	#7
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,767	Does it have sidemarker lites on the fenders? The 67's didnt have them. ------------------ 1971 chevy suburban (BIG ORANGE) 1970,68,90 swb Little BUCKS one day 67/72 truck parts bought/sold LIFE IS GOOD,THANK GOD FOR IT! __________________ Things happen for a reason!

05-16-2002, 02:54 PM	#8
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	Thanks for making this an international website. Fire away with questions, these guys (and gals) have all the answers. Bill - Tucson ------------------ 56 Studebaker 2 dr Wagon 66 Chevelle 2 dr 4 speed 71 C30 Longhorn 86 Monte Carlo SS 96 Tahoe __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com

05-17-2002, 11:29 AM	#12
Blue68 Registered User Join Date: Apr 2000 Location: Frisco, Tx, USA Posts: 606	You can also look at the frame rail on the driver's side beside the engine. The vin is stamped on the top of the frame. Just one more possible piece of the puzzle. ------------------ '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades. Way too much money and time..But it's a hobby. __________________ http://home.comcast.net/~r.landrum/w...tos.html-.html '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades.

05-15-2002, 02:03 AM	#1
TimoL Registered User Join Date: May 2002 Location: KEMI, FINLAND Posts: 14	67 C-10? Hello from Finland! Could somebody help me to find out what my truck´s model exactly is... So I just bought a truck which should be a chevrolet 1967 C-10 ½ tons, but I'm not sure. Here is the info from the truck's ID -plate: G.M.C. TRUCK MAXIMUM GVW RATING 5000 VEHICLE IDENTIFICATION NUMBER CS1590D PC10812A DD Original (maybe) Florida truck. I tried to decode it, but found some problems with the ID number. Now Truck have 454 TH350 and 10 bolt. Any help highly appreciated! Thanks in advance Timo Luoma PS. I need the info because I have to have a one kind of type approval when register it to Finland.

05-15-2002, 03:02 AM	#2
Dim Tha Russian Canadian Join Date: Nov 2000 Location: Lethbridge, AB Posts: 358	well with my limited knowledge of the ID # decoding process. I gather that you have a 69 Panel Truck...I'm confused and going to bed. Maybe you misread the numbers? or am'I way out there lost and confused? A 67 C10 would be something like: CS147A100099 So it's a 67 pickup made in Atlanta and it was the 99th one. right? D!m ------------------ BlueStreak 69 Chevy C10 - (Under Construction) pos_8@hotmail.com __________________ Dimitri Lethbridge, Alberta 69 Chevy C10 - (Under Construction) pos_8@hotmail.com

05-15-2002, 05:09 AM	#3
TimoL Registered User Join Date: May 2002 Location: KEMI, FINLAND Posts: 14	Thanks for the reply Dim. Right and I'm also confused! Numbers are correct but I found these numbers from the plate which was attached on the drivers door pillar. Is it the right place? I just noticed that there was a remark on the VIN decoder site (The Model Number is located on the inside of the glove box door) - I didn't know this yesterday and only picked up the numbers from the door pillar. Should these numbers match? The Florida guy who sold this truck to my friend said that it is a 67 and all the customs papers says 1967 etc., but maybe they are wrong or then I just have to find the right numbers...opinions and info, please Timo

05-15-2002, 05:12 AM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	It is a GMC not a Chevy. The decode is not the same. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite. E-mail longhornmail@yahoo.com My name is Andy...not Randy...I'm in Ohio...Not Illinois...close enough? Columbus Ohio

05-16-2002, 01:55 AM	#6
TimoL Registered User Join Date: May 2002 Location: KEMI, FINLAND Posts: 14	Thanks for the replies! Maybe she really is a GMC but then she has a Chevy's front fenders and hood (Looks just like a Chevy). It's a possibility because she has been customized quite much by the guys is Florida. Yep the VIN plate was on the left door pillar but as you can already guess there was no option sticker left on the glove box door. Is there any special features in a GMC when compared in a Chevy? This is what I managed to find out from the doors plate (I used 67-69 GMC Model number Codes -> http://www.gmcpaulstruckparts.com/67-72_gmc.htm): C=2 wheel drive S=Six cylinder gas 1=½ ton OD=Wide Side P=Pontiac C=1967 I just joined here yesterday and I don't really know much about these trucks - this is my first adventure to the world of trucks. THANKS FOR THE GOOD SITE AND OF COURSE THANK YOU ALL for helping the unknowing foreigner! Timo

05-16-2002, 04:58 PM	#9
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	guys, that is a GMC VIN code, they do not decode same way as a Chevy VIN code........ wlecome to the forum,. ------------------ Randy- Lincoln, IL randy@ccaonline.com 2177353230 many GM parts bought, traded, or sold -am parting out: '81 Cutlass Supreme and 84 SE Firebird T5 3.73 current fleet: -71 C-10 350/CH465/3.07- assembling currently -90 Cavalier/2.2/sky blue, driver #2 -84 Z28 5.0L/700R4/3.73 daily driver #1 -'90 Corsica 3.1L and '82 purple Trans Am- storing Paint is overrated* © RSS Enterprises 2000

05-16-2002, 10:24 PM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Other than the grill, and trim, the only differance on the GMC trucks was a small handfull of options. They had some that the chevys did not. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite. E-mail longhornmail@yahoo.com My name is Andy...not Randy...I'm in Ohio...Not Illinois...close enough? Columbus Ohio

05-17-2002, 03:52 AM	#11
TimoL Registered User Join Date: May 2002 Location: KEMI, FINLAND Posts: 14	I got a copy of CERTIFICATE OF TITLE and that confirms that it's a GMC from year 1967. Does somebody know Carl Lee McCloud from Sparta Michican? He is the former owner of my truck. No side marker lites on the fenders. This kind of trucks are quite rare in Finland and now I'm a happy owner of one!! I put some pics on the net when I have decent ones. Timo

05-21-2002, 01:39 AM	#13
TimoL Registered User Join Date: May 2002 Location: KEMI, FINLAND Posts: 14	Truck is now almost registered in Finland but the Finnish authorities created a new problem -> truck is a original 6 cylinder and now has a 454, so I have to find out all the technical specs of the truck ( axle masses, measures etc.) Is there anything online or could someone just send me the specs via email? However they accept Chevy specs too...(it's a miracle!! Timo

05-22-2002, 01:20 AM	#14
TimoL Registered User Join Date: May 2002 Location: KEMI, FINLAND Posts: 14	The registration is now done and again thanks for your help! Pics are coming when I have chance and time to take them! Now I'm just going to enjoy the ride of my BigBlock GMC truck... Timo



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.