She keeps boggin on me - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rollinsqrbdy · 09-30-2009, 02:22 PM

Hey guys i got a 84 4x4 swb. Its got a 6" lift and some 35's. My problem is everytime i take it out to play, when i get to a decent steep hill and try going up it, it boggs out. It has a 350 with a air gap intake and a 600 cfm edelbrock carb. what can i do to the carb so it wont bogg out and where can i get it? Thanks in advance

72chevyk10 · 09-30-2009, 05:17 PM

try running the spring loaded needles and seats. those are in the "off road" carbs edelbrock makes

Oilbrnr · 09-30-2009, 06:17 PM

My .02, put a Quadrajet back in there.

shilo · 09-30-2009, 06:53 PM

it shouldnt bog that bad unless the hill is really steep. How does it run on level ground when you hammer on it from a idle? Sounds like its gettin a heavy load at a low rpm and something aint in tune

Rollinsqrbdy · 09-30-2009, 11:00 PM

Well it runs awesome on level ground. The hills are a lil steep. I mean i cant get my brother in the truck when i get on a hill cause he thinks its gonna flip over. lol sissy.

Shilo- That truck in ur avator looks sweet!!!

OLDCHEV4X4 · 10-01-2009, 07:45 AM

Quadrajet's work great on steep hills and rough terrain.
I hear complaints of the edelbrock carbs not being too good on the steep stuff.
I would try the spring loaded needle like was said earlier. Also extending the bowl vent with a rubber hoze helps.

JameslovesJammie · 10-01-2009, 02:17 PM

Edelbrock makes a Quadrajet style carb with SUPER tiny primaries and HUGE secondaries that is supposed to be fantastic offroad. 4x4 magazine a few years ago said it was the next best thing to fuel injection for offroading.

Rollinsqrbdy · 10-01-2009, 06:25 PM

Quote:

Originally Posted by JameslovesJammie

Edelbrock makes a Quadrajet style carb with SUPER tiny primaries and HUGE secondaries that is supposed to be fantastic offroad. 4x4 magazine a few years ago said it was the next best thing to fuel injection for offroading.

Cool. Does anyone in the room have one? I'd like to know just how good they are.

72chevyk10 · 10-01-2009, 07:55 PM

my edelbrock did perfectly fine on a near 45* slope straight up. i just put it in low range and took it kinda slow (didnt know what was on the other side of the hill

) i aint even runin the spring loaded neadles and seats...

EDIT: its the standard edelbrock style not the q-jet.

watahyahknow · 10-01-2009, 08:11 PM

dunno if it worked fine before but wat kind of gear do you have in the axles with the bigger tires it might pop out because it cant rev enough

tomtuna1978 · 10-01-2009, 08:21 PM

i have a q-jet on my 79 c10 and ive had the rear bumper scraping the ground wothout even a miss !!! dude just get a q-jet !!! i had a holley on it and it just bogged on every little bump and hill !!!

72chevyk10 · 10-01-2009, 10:23 PM

Quote:

Originally Posted by watahyahknow

dunno if it worked fine before but wat kind of gear do you have in the axles with the bigger tires it might pop out because it cant rev enough

im runin 4.11s and i was in 4lo. it was wound up quite a bit

Rollinsqrbdy · 10-01-2009, 10:31 PM

Alright guys im gonna get a quadrajet. I cant go wrong from what it sounds like. thanks

09-30-2009, 02:22 PM	#1
Rollinsqrbdy Registered User Join Date: Aug 2008 Location: Dexter, N.M. Posts: 1,082	She keeps boggin on me Hey guys i got a 84 4x4 swb. Its got a 6" lift and some 35's. My problem is everytime i take it out to play, when i get to a decent steep hill and try going up it, it boggs out. It has a 350 with a air gap intake and a 600 cfm edelbrock carb. what can i do to the carb so it wont bogg out and where can i get it? Thanks in advance __________________ Its Kool to be a square 2013 Chevy Silverado Z71 w/ 7" lift and 35" Nitto's 1985 C-10 ......My dream truck (under construction) 1984 k 10 Silverado...6" lift with 38.5 super swampers New Mexico Member --- Member of the Square Body Club---

09-30-2009, 06:17 PM	#3
Oilbrnr Registered User Join Date: Feb 2009 Location: Scottsdale, AZ Posts: 390	Re: She keeps boggin on me My .02, put a Quadrajet back in there. __________________ -Don- '66 C10 w/factory A/C '77 Cheyenne K5 350/465/205 '80 Custom Deluxe K20 350/465/205 '04 Denali XL '05 DMax CCLB 4x Have a Hickey Sidewinder Winch and need the owners/install manual? Send me a PM with your email address and I'll forward you a .pdf

09-30-2009, 06:53 PM	#4
shilo Registered User Join Date: Jun 2005 Location: Grand Junction , CO Posts: 602	Re: She keeps boggin on me it shouldnt bog that bad unless the hill is really steep. How does it run on level ground when you hammer on it from a idle? Sounds like its gettin a heavy load at a low rpm and something aint in tune __________________ 71 swb 4x4, 37" Iroks, t400/205 496 77 CJ-7, Narrowed Dana 60 Lockrite, 14 Bolt Spool, 4.56 gears, 39.5" boggers. 360 t-18/d20

09-30-2009, 11:00 PM	#5
Rollinsqrbdy Registered User Join Date: Aug 2008 Location: Dexter, N.M. Posts: 1,082	Re: She keeps boggin on me Well it runs awesome on level ground. The hills are a lil steep. I mean i cant get my brother in the truck when i get on a hill cause he thinks its gonna flip over. lol sissy. Shilo- That truck in ur avator looks sweet!!! __________________ Its Kool to be a square 2013 Chevy Silverado Z71 w/ 7" lift and 35" Nitto's 1985 C-10 ......My dream truck (under construction) 1984 k 10 Silverado...6" lift with 38.5 super swampers New Mexico Member --- Member of the Square Body Club---

10-01-2009, 07:45 AM	#6
OLDCHEV4X4 Registered User Join Date: Apr 2000 Location: Chester County PA, USA Posts: 1,228	Re: She keeps boggin on me Quadrajet's work great on steep hills and rough terrain. I hear complaints of the edelbrock carbs not being too good on the steep stuff. I would try the spring loaded needle like was said earlier. Also extending the bowl vent with a rubber hoze helps. __________________ 72 k/10 short wideside 72 k/5 Blazer 72 K/5 Blazer - obstacle course racer 72 custom/10 8' bed 70 K/5 Blazer 67 C-30 GMC Flat bed 86 GMC K2500 Plow Truck 85 GMC K3500 84 M1008 85 M1008 77 G30 Motor Home 72 Sears 12hp Tractor Glenmoore, Pennsylvania

10-01-2009, 02:17 PM	#7
JameslovesJammie God Bless Mr. T Join Date: Apr 2004 Location: Minot, ND Posts: 348	Re: She keeps boggin on me Edelbrock makes a Quadrajet style carb with SUPER tiny primaries and HUGE secondaries that is supposed to be fantastic offroad. 4x4 magazine a few years ago said it was the next best thing to fuel injection for offroading. __________________ Like a midget at a urinal...sometimes you must stay on your toes.

10-01-2009, 08:11 PM	#10
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: She keeps boggin on me dunno if it worked fine before but wat kind of gear do you have in the axles with the bigger tires it might pop out because it cant rev enough __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

10-01-2009, 08:21 PM	#11
tomtuna1978 Registered User Join Date: Apr 2009 Location: Bend,Oregon Posts: 225	Re: She keeps boggin on me i have a q-jet on my 79 c10 and ive had the rear bumper scraping the ground wothout even a miss !!! dude just get a q-jet !!! i had a holley on it and it just bogged on every little bump and hill !!!

10-01-2009, 10:31 PM	#13
Rollinsqrbdy Registered User Join Date: Aug 2008 Location: Dexter, N.M. Posts: 1,082	Re: She keeps boggin on me Alright guys im gonna get a quadrajet. I cant go wrong from what it sounds like. thanks __________________ Its Kool to be a square 2013 Chevy Silverado Z71 w/ 7" lift and 35" Nitto's 1985 C-10 ......My dream truck (under construction) 1984 k 10 Silverado...6" lift with 38.5 super swampers New Mexico Member --- Member of the Square Body Club---



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.