steering column 66 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Byronic · 09-30-2009, 07:59 PM

Are the upper and lower bearings easy to find for the steering shaft? I have mine apart and would like to replace before installing. Thanks

**DPowers** · 09-30-2009, 09:30 PM

Try here

http://www.truckandcarshop.com/6072.html

Byronic · 09-30-2009, 10:43 PM

Thanks DPowes.

Found it. Last question. Is it pressed in and how does one remove it?

**DPowers** · 10-01-2009, 02:39 PM

I don't think they are pressed in.

*LILRED66* · 10-01-2009, 03:23 PM

They are pressed-on...with a little gentle persuasion, they come off. Good luck and let us know how it works out.

Byronic · 10-01-2009, 10:31 PM

Thanks Tony, Glad to see your back. Today was my Birthday. My wife said I could do whatever I wanted. Go any where,do anything, so I choose to replace my steering column with one I bought from LILRED. First time installing and it went great.

I pulled the truck in the carport and smelt gas. After looking under the hood, gas was dripping from the inline filter onto the exhaust manifold.

NOT COOL. I read a post awhile back and saw the results. I will finish the filter replacement tomorrow.

09-30-2009, 07:59 PM	#1
Byronic The Beach Cruiser Join Date: May 2009 Location: Panama City, Florida Posts: 358	steering column 66 Are the upper and lower bearings easy to find for the steering shaft? I have mine apart and would like to replace before installing. Thanks __________________ 1999 Silverado DD 1966 Panel Truck 2003 Harley Road Glide 1967 Schwinn Tandem Single Speed

09-30-2009, 09:30 PM	#2
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,439	Re: steering column 66 Try here http://www.truckandcarshop.com/6072.html

09-30-2009, 10:43 PM	#3
Byronic The Beach Cruiser Join Date: May 2009 Location: Panama City, Florida Posts: 358	Re: steering column 66 Thanks DPowes. Found it. Last question. Is it pressed in and how does one remove it? __________________ 1999 Silverado DD 1966 Panel Truck 2003 Harley Road Glide 1967 Schwinn Tandem Single Speed

10-01-2009, 02:39 PM	#4
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,439	Re: steering column 66 I don't think they are pressed in.

10-01-2009, 03:23 PM	#5
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: steering column 66 They are pressed-on...with a little gentle persuasion, they come off. Good luck and let us know how it works out.

10-01-2009, 10:31 PM	#6
Byronic The Beach Cruiser Join Date: May 2009 Location: Panama City, Florida Posts: 358	Re: steering column 66 Thanks Tony, Glad to see your back. Today was my Birthday. My wife said I could do whatever I wanted. Go any where,do anything, so I choose to replace my steering column with one I bought from LILRED. First time installing and it went great.I pulled the truck in the carport and smelt gas. After looking under the hood, gas was dripping from the inline filter onto the exhaust manifold. NOT COOL. I read a post awhile back and saw the results. I will finish the filter replacement tomorrow. __________________ 1999 Silverado DD 1966 Panel Truck 2003 Harley Road Glide 1967 Schwinn Tandem Single Speed



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.