Auxiliary Door Seals - The 1947 - Present Chevrolet & GMC Truck Message Board Network

S10Fan · 10-04-2009, 06:25 AM

Do any of you guys have the factory auxiliary door seals on your trucks? These are the seals that glue to the door over the window area. If you do I'd like a picture. I have some for my truck but I want to make sure of the location before I glue them in.

Thanks!

Bryan

S10Fan · 10-04-2009, 03:48 PM

^^^Bump^^^

81shortstep · 10-04-2009, 07:36 PM

is this what your talking about
Name: window1.jpg
Views: 555
Size: 32.5 KB

Name: window2.jpg
Views: 553
Size: 30.3 KB

these are off my 81 hope this helps

S10Fan · 10-04-2009, 08:08 PM

Yes! Thank You!

Bryan

68JOHNDEERE · 01-12-2017, 07:00 PM

I was doing some research on auxiliary upper door seals on placement and orientation.

Thank you for taking these pictures.

UKNOWME · 01-12-2017, 07:52 PM

I'm about to add them to my truck.

chrismoore701 · 01-12-2017, 09:21 PM

What years are these for?

UKNOWME · 01-12-2017, 09:29 PM

According to LMC 79-81 but I've seen them added to many of the 73-87s

Matt Man · 01-12-2017, 09:35 PM

Any advantage to these?

UKNOWME · 01-12-2017, 09:51 PM

Quote:

Originally Posted by UKNOWME

According to LMC 79-81 but I've seen them added to many of the 73-87s

Another catalog indicates 73-77 and 78-81 with different part numbers.

UKNOWME · 01-12-2017, 09:53 PM

Quote:

Originally Posted by Matt Man

Any advantage to these?

I have an air leak that I cannot get rid of if the wind is blowing at the right angle. I believe this will solve that problem. I already have all new weatherstripping EVERYWHERE else and doors are adjusted properly.

Matt Man · 01-13-2017, 05:34 PM

Quote:

Originally Posted by UKNOWME

I have an air leak that I cannot get rid of if the wind is blowing at the right angle. I believe this will solve that problem. I already have all new weatherstripping EVERYWHERE else and doors are adjusted properly.

I have the same problem, only on the passenger side. Report back with us if this fixes the problem.

UKNOWME · 01-13-2017, 06:23 PM

Quote:

Originally Posted by Matt Man

I have the same problem, only on the passenger side. Report back with us if this fixes the problem.

Passenger side for me too. Guess we'll see whenever I get to it. So much to do and so little time.

**TKCR** · 01-13-2017, 09:28 PM

I got some for my 86, just never have gotten around to installing them. The idea of using that glue kind of turns me off to doing it. It would just be my luck to get that sticky sh!t on something I don't want it on, and then have a mess to clean.

UKNOWME · 01-13-2017, 11:43 PM

Quote:

Originally Posted by TKCR

I got some from my 86, just never have gotten around to installing them. The idea of using that glue kind of turns me off to doing it. It would just be my luck to get that sticky sh!t on something I don't want it on, and then have a mess to clean.

That's my hold back too. Gotta have time to be patient enough to do it. If I could use 3m tape I would be happier but was told it would make it too tall.

**TKCR** · 01-14-2017, 02:00 AM

Quote:

Originally Posted by UKNOWME

That's my hold back too. Gotta have time to be patient enough to do it. If I could use 3m tape I would be happier but was told it would make it too tall.

I saved this video, in hopes when I do get around to it.

https://youtu.be/qDBojIza-TA

lilpoindexter · 01-14-2017, 01:27 PM

The vent windows are where most of my air leaks were from.

UKNOWME · 01-14-2017, 02:05 PM

Quote:

Originally Posted by TKCR

I saved this video, in hopes when I do get around to it.

https://youtu.be/qDBojIza-TA

I have that same video saved!

**TKCR** · 01-14-2017, 08:23 PM

Quote:

Originally Posted by lilpoindexter

The vent windows are where most of my air leaks were from.

Same here and after getting the vent windows rebuilt from Precision, the air leaks are pretty much non-existent. I think, and I'm sure it safe to speak for UKNOWME also, we are just a bit anal about the least little bit of air noise. So if adding this seal helps, then why not?

phillipm · 08-17-2017, 12:40 PM

Thought I'd update this thread. I'd been searching for a while on installing these and no one seemed to have pictures of the leading edge. However I'm pretty sure I figured it out. If not it sure fits well like this! Haha Anyways, just thought I'd share. I got these from LMC and I was worried they would make the door harder to shut, however they didn't effect the closing at all. And the lip kisses up nice and tight against the body with where I've got my doors placed. Over all super happy at the moment! I'll report back after driving if they make a difference. I already redid my wing windows so I was just trying to see how quiet I could get this thing.

UKNOWME · 08-17-2017, 01:24 PM

What adhesive did you use?

phillipm · 08-17-2017, 01:26 PM

Quote:

Originally Posted by UKNOWME

What adhesive did you use?

I used the 3M super black weatherstrip adhesive. I followed the procedure here.
https://youtu.be/qDBojIza-TA

**TKCR** · 08-17-2017, 02:02 PM

Yeah looks good. Well,if it didn't take you that long, then I need to quit procrastinating and get mine done too. Thanks for posting the pics and updating the thread for others that are in need of help.
Waiting to hear about the changes in the wind noise, if it helped. It certainly can't hurt.

phillipm · 08-17-2017, 03:08 PM

Yeah only took me about 20 minutes to do them. I did cut off the mounting in the rear and I couldn't figure out how that was supposed to screw in, and I didn't see 1 picture of another one with that mount. So, I just cut it off. Next thing I'm doing is adding some rain papers to the door before I put the panels back on. Every time I was driving past an 18 wheeler I would get puffs of air through the door and into the interior. And being in the desert every time that happens it introduces HOT air into the cab that the AC must remove again. So, I'm hoping these papers slow the air intrusion.

Dainbramaged · 08-21-2017, 01:26 PM

Quote:

Originally Posted by phillipm

Yeah only took me about 20 minutes to do them. I did cut off the mounting in the rear and I couldn't figure out how that was supposed to screw in, and I didn't see 1 picture of another one with that mount. So, I just cut it off. Next thing I'm doing is adding some rain papers to the door before I put the panels back on. Every time I was driving past an 18 wheeler I would get puffs of air through the door and into the interior. And being in the desert every time that happens it introduces HOT air into the cab that the AC must remove again. So, I'm hoping these papers slow the air intrusion.

I've always had good luck using dollar store shower curtains cut to size and stuck on with strip caulk from a hardware store. Might want to add some thin insulation between the plastic and door panels.
THANKS! to the OP and the video from phillipm for the 3M info.

10-04-2009, 06:25 AM	#1
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,642	Auxiliary Door Seals Do any of you guys have the factory auxiliary door seals on your trucks? These are the seals that glue to the door over the window area. If you do I'd like a picture. I have some for my truck but I want to make sure of the location before I glue them in. Thanks! Bryan __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

10-04-2009, 03:48 PM	#2
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,642	Re: Auxiliary Door Seals ^^^Bump^^^ __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

10-04-2009, 07:36 PM	#3
81shortstep Registered User Join Date: Feb 2007 Location: saskatoon,canada Posts: 51	Re: Auxiliary Door Seals is this what your talking about these are off my 81 hope this helps __________________ 81 gmc short box stepside(rebuild in progress) 09 mitsubishi lancer gt

10-04-2009, 08:08 PM	#4
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,642	Re: Auxiliary Door Seals Yes! Thank You! Bryan __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

01-12-2017, 07:00 PM	#5
68JOHNDEERE Registered User Join Date: Sep 2012 Location: Ringle Posts: 107	Re: Auxiliary Door Seals I was doing some research on auxiliary upper door seals on placement and orientation. Thank you for taking these pictures.

01-12-2017, 07:52 PM	#6
UKNOWME Registered User Join Date: Aug 2012 Location: Clovis, NM Posts: 2,705	Re: Auxiliary Door Seals I'm about to add them to my truck. __________________ 2018 Audi S5- wife's ride 1980 Chevy Scottsdale http://67-72chevytrucks.com/vboard/s...d.php?t=543511 1981 Chevy Silverado- in pieces 1964 Chevy c10 2017 Jeep Wrangler JKU

01-12-2017, 09:21 PM	#7
chrismoore701 Registered User Join Date: Dec 2004 Location: Highland, IN Posts: 2,326	Re: Auxiliary Door Seals What years are these for? __________________ Chris _______________________________ 1979 Chevy Stepside SPORT 2018 Chevy Silverado, 39 years apart My build 2008-2016. http://m.imgur.com/a/bURrE

01-12-2017, 09:29 PM	#8
UKNOWME Registered User Join Date: Aug 2012 Location: Clovis, NM Posts: 2,705	Re: Auxiliary Door Seals According to LMC 79-81 but I've seen them added to many of the 73-87s __________________ 2018 Audi S5- wife's ride 1980 Chevy Scottsdale http://67-72chevytrucks.com/vboard/s...d.php?t=543511 1981 Chevy Silverado- in pieces 1964 Chevy c10 2017 Jeep Wrangler JKU

01-12-2017, 09:35 PM	#9
Matt Man Registered User Join Date: Oct 2009 Location: Buhl, Idaho Posts: 1,438	Re: Auxiliary Door Seals Any advantage to these? __________________ 86 c30 crew cab dually 454/400 4/6 drop SOLD 1-8-11 1981 chevy K10 short Bed Scottsdale SOLD 10-26-2020 67 GMC Stepside Straight six/3 on the tree "The Peach" 2020 Silverado Double Cab LT Z71 5.3 8 speed Daily Driver K10 build http://67-72chevytrucks.com/vboard/s...d.php?t=671934 The Peach build http://67-72chevytrucks.com/vboard/s...d.php?t=733903

01-13-2017, 09:28 PM	#14
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,978	Re: Auxiliary Door Seals I got some for my 86, just never have gotten around to installing them. The idea of using that glue kind of turns me off to doing it. It would just be my luck to get that sticky sh!t on something I don't want it on, and then have a mess to clean. __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR Last edited by TKCR; 01-13-2018 at 02:30 PM.

01-14-2017, 01:27 PM	#17
lilpoindexter Registered User Join Date: Sep 2010 Location: los angeles Posts: 1,134	Re: Auxiliary Door Seals The vent windows are where most of my air leaks were from.

08-17-2017, 12:40 PM	#20
phillipm Registered User Join Date: Oct 2014 Location: Scottsdale, AZ Posts: 465	Re: Auxiliary Door Seals Thought I'd update this thread. I'd been searching for a while on installing these and no one seemed to have pictures of the leading edge. However I'm pretty sure I figured it out. If not it sure fits well like this! Haha Anyways, just thought I'd share. I got these from LMC and I was worried they would make the door harder to shut, however they didn't effect the closing at all. And the lip kisses up nice and tight against the body with where I've got my doors placed. Over all super happy at the moment! I'll report back after driving if they make a difference. I already redid my wing windows so I was just trying to see how quiet I could get this thing.

08-17-2017, 01:24 PM	#21
UKNOWME Registered User Join Date: Aug 2012 Location: Clovis, NM Posts: 2,705	Re: Auxiliary Door Seals What adhesive did you use? __________________ 2018 Audi S5- wife's ride 1980 Chevy Scottsdale http://67-72chevytrucks.com/vboard/s...d.php?t=543511 1981 Chevy Silverado- in pieces 1964 Chevy c10 2017 Jeep Wrangler JKU

08-17-2017, 02:02 PM	#23
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,978	Re: Auxiliary Door Seals Yeah looks good. Well,if it didn't take you that long, then I need to quit procrastinating and get mine done too. Thanks for posting the pics and updating the thread for others that are in need of help. Waiting to hear about the changes in the wind noise, if it helped. It certainly can't hurt. __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

08-17-2017, 03:08 PM	#24
phillipm Registered User Join Date: Oct 2014 Location: Scottsdale, AZ Posts: 465	Re: Auxiliary Door Seals Yeah only took me about 20 minutes to do them. I did cut off the mounting in the rear and I couldn't figure out how that was supposed to screw in, and I didn't see 1 picture of another one with that mount. So, I just cut it off. Next thing I'm doing is adding some rain papers to the door before I put the panels back on. Every time I was driving past an 18 wheeler I would get puffs of air through the door and into the interior. And being in the desert every time that happens it introduces HOT air into the cab that the AC must remove again. So, I'm hoping these papers slow the air intrusion.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.