SC Boy Do I Have Some Parts!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**wancosc356** · 10-05-2009, 10:43 AM

Hey guys. I picked up some parts this past weekend and I have gone through and figured out what I needed and what I don't. Here is what I have that needs to go. I will ship the smaller stuff. I prefer the bigger stuff to be picked up. Prices do not include shipping. If I don't have a price listed...just ask and I will update my list. I will update the list as needed and delete pictures as needed. All of my prices are OBO but please be reasonable. I prefer paypal but will take money order too. If you pay with paypal, 5% will be added to your total to cover fees.

Please post here before sending me a PM. Thanks guys.

72 LWB Frame (Bare): $150
72 Front Suspension Clip (Disc): SOLD
72 5 lug rear axle (Unsure of gears): SOLD
72 LWB Trailing Arms: $100
2 piece drive shaft: $75
72 A/C Cab w/ Clean Title (Bare): $350
67 Non A/C Cab w/ NO Title (Bare): $150
67 Fenders (Bare): $50 each
In Cab Gas Tanks: $25 each
Step Side Tail Gates: $50 each
Front Bed Panel: $75
72 Grill w/ Insert and Brackets: $150
Headlight Trim Rings: $15
72 Painted Bumper: $50
Bumper Guards: SOLD
Front Bumper Brackets (4): $40
Rear Bumper Brackets (4): SOLD
Rear Bumper Bracket Covers: SOLD
Cowls: $20 each
Steering columns (3spd & Auto) : $40 each[
Outer Floor Rear Section Patch Panels (Galvanized?): $40
Hub caps: $10 each
Vent Window: SOLD
Emblems: $10 each
Gauge Clusters: $25 each
Burb Tank w/ Straps: SOLD
Lenses: $5 each
Light housings: $10 each
Ram Horn Exhaust Manifolds: SOLD
Bed Wheel Tub Splash Shield: $25
V8 Fan Shroud: $40
Intake Manifolds: $25 each
Seat Brackets: $10 each
Hood Hinge: $10
Motor Stands w/ Mounts: $50
Motor Stands w/o Mounts: $25
Headers: $50
Windshield Trim: $30 each
Windshields: $100 each
Big Back Glass: $50 each
Valve Covers: $30
Window Shades: $10 each
PS Setup: SOLD
Seat belts (Retractor ends only): $20
Wiper Switch: $20

Feel free to ask about anything else you see.

**wancosc356** · 10-05-2009, 10:46 AM

**wancosc356** · 10-05-2009, 10:49 AM

**wancosc356** · 10-05-2009, 10:51 AM

**wancosc356** · 10-05-2009, 10:53 AM

**lks dcvn** · 10-05-2009, 11:36 AM

any idea on cost to ship the burb tank to 43615? Thx.

gcburdic · 10-05-2009, 12:04 PM

How much for the PS setup? and yellow and black hub cap?
Is this stuff in SC??...If so, where??....Thanks

jay_shy · 10-05-2009, 12:27 PM

third post secont pic. How much for the window vent shades shipped to 16635.

Jason

PT'S 70 CST · 10-05-2009, 12:30 PM

How much for the seat belts in the yellow and white cab.

PT

70LonghornCST · 10-05-2009, 12:40 PM

Condition of front and rear windshield molding? Shipping to 95326...Thanks!

**michael bustamante** · 10-05-2009, 01:38 PM

mike!! bring me the 71 72 front brake lines if therye in goo shape. also the motor mounts so I can see if theyre for a big block. seeing as how Ill need them now. oh!! also the rear bumper brackets, can you post a pic.? you know I need those and the the guards too.

dabels23 · 10-05-2009, 01:40 PM

What do the headers fit

**BIG ORANGE** · 10-05-2009, 02:33 PM

Quote:

Originally Posted by michael bustamante

mike!! bring me the 71 72 front brake lines if therye in goo shape. also the motor mounts so I can see if theyre for a big block. seeing as how Ill need them now. oh!! also the rear bumper brackets, can you post a pic.? you know I need those and the the guards too.

Hey Michael, I got some front brakeline that I can give to WANCOSC356 for you if you like, he is comming by my place to pickup a parts lot that I got left over from 15yrs of 67/72 trucks!
Donnie

**michael bustamante** · 10-05-2009, 02:50 PM

man I sure would appreciate that! Im doing the conversion on my 67 now and I cant afford to get some made for me right now. thank you very much big orange. I can only imagine what a 15 year old collection looks like!!

**wancosc356** · 10-05-2009, 03:19 PM

Quote:

Originally Posted by lks dcvn

any idea on cost to ship the burb tank to 43615? Thx.

No idea. If I can find a box for it, I can find out. Give me a few days.

Quote:

Originally Posted by gcburdic

How much for the PS setup? and yellow and black hub cap?
Is this stuff in SC??...If so, where??....Thanks

As far as the power steering setup, do all do u want? How about $50 for the box, pump and hoses? The hubcaps are $10 each. This stuff is in Florence, SC.

Quote:

Originally Posted by jay_shy

third post secont pic. How much for the window vent shades shipped to 16635.

Jason

Do u want them all or just two? How about $10 each?

Quote:

Originally Posted by PT'S 70 CST

How much for the seat belts in the yellow and white cab.

PT

I haven't really looked at them. I believe they are in pretty good shape. Just need a good cleaning. How about $40?

Quote:

Originally Posted by 70LonghornCST

Condition of front and rear windshield molding? Shipping to 95326...Thanks!

The rubber moldings or the stainless trim?

Quote:

Originally Posted by michael bustamante

mike!! bring me the 71 72 front brake lines if therye in goo shape. also the motor mounts so I can see if theyre for a big block. seeing as how Ill need them now. oh!! also the rear bumper brackets, can you post a pic.? you know I need those and the the guards too.

How would I bring them back? Ill be flying...not driving. Im pretty sure the motor mounts are for small blocks. Rob had a diagram with them all listed but I couldn't find it. There is a pic of the guards. U can kinda see the brackets underneath. Let me know if u want more pics than that.

Quote:

Originally Posted by dabels23

What do the headers fit

Not quite sure what the headers fit. I believe a 350...but Im not sure. Sorry.

**michael bustamante** · 10-05-2009, 03:29 PM

headers are for sbc. damn I thought you drove man. can you ship the lines that big orange is gonna hook me up with, shoot me a quote and ill get you the money, also I just need the driver side rear bumper mounts and guard. but if worse comes to worse Ill get the set from you.
any word on that vent window? I know I know, I ask too much of you!! I think youre right too. those are sbc mounts.

**wancosc356** · 10-05-2009, 03:40 PM

Quote:

Originally Posted by michael bustamante

headers are for sbc. damn I thought you drove man. can you ship the lines that big orange is gonna hook me up with, shoot me a quote and ill get you the money, also I just need the driver side rear bumper mounts and guard. but if worse comes to worse Ill get the set from you.
any word on that vent window? I know I know, I ask too much of you!! I think youre right too. those are sbc mounts.

Thats what I thought. Thanks for the clarification. Haha. Nope, I flew. I can ship the lines for you man. Do i just find a box big enough so that the lines dont have to be bent? Ok on the bumper mounts and guards. Id rather sell them as a set if I can. The driver vent window is pretty nice. Chrome. No scratches or rust from what I can see. Glass looks good. Rubber will need to be replaced. I also have the passenger one too. I thought so about the mounts.

70LonghornCST · 10-05-2009, 04:14 PM

I am interested in the windshield chrome trim please. Front and rear. Shipped to 95357. And what shape are they in. Thank you!

silver7 · 10-05-2009, 04:27 PM

Interested in the grill if no one has claimed it yet. Is there any damage? Couldn't tell from pics. Thanks.

**michael bustamante** · 10-05-2009, 04:44 PM

ok mike I pm`d you on all that!

**wancosc356** · 10-05-2009, 05:38 PM

Quote:

Originally Posted by 70LonghornCST

I am interested in the windshield chrome trim please. Front and rear. Shipped to 95357. And what shape are they in. Thank you!

Ok. I just went out and looked at it. The front looks good. The rear has two small dings that should be able to be fixed. I only have one rear trim. Id say they are in good shape. They need to be polished and those two small dings fixed but otherwise good. How about $60 plus shipping for the front and rear? It will be a few days before I can get you a shipping quote.

Quote:

Originally Posted by silver7

Interested in the grill if no one has claimed it yet. Is there any damage? Couldn't tell from pics. Thanks.

No one has claimed the grill. There is some damage on the outer grill top middle area. It is hard to tell from the pic. I can shoot you some better ones tomorrow if you like. Also, the inner grill is really nice with the exception of one small crack.

Quote:

Originally Posted by michael bustamante

ok mike I pm`d you on all that!

Got it. You are in line for the rear bumper brackets, rear bumper splash guards, and vent window.

jay_shy · 10-05-2009, 05:39 PM

How much to total to ship the the best right one and the best left one to 16635? One of each.

Jason

**wancosc356** · 10-05-2009, 05:41 PM

Quote:

Originally Posted by jay_shy

How much to total to ship the the best right one and the best left one to 16635? One of each.

Jason

Ill get you a quote tomorrow. I gotta go get some boxes and get shipping quotes for others too.

mup123 · 10-05-2009, 06:08 PM

I'm interested in both rams horn manifolds. Are they in good shape and how much to ship them to 27028?

gopokes · 10-05-2009, 06:24 PM

Have you sold the PS setup yet?

10-05-2009, 10:43 AM	#1
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Boy Do I Have Some Parts!!! Hey guys. I picked up some parts this past weekend and I have gone through and figured out what I needed and what I don't. Here is what I have that needs to go. I will ship the smaller stuff. I prefer the bigger stuff to be picked up. Prices do not include shipping. If I don't have a price listed...just ask and I will update my list. I will update the list as needed and delete pictures as needed. All of my prices are OBO but please be reasonable. I prefer paypal but will take money order too. If you pay with paypal, 5% will be added to your total to cover fees. Please post here before sending me a PM. Thanks guys. 72 LWB Frame (Bare): $150 72 Front Suspension Clip (Disc): SOLD 72 5 lug rear axle (Unsure of gears): SOLD 72 LWB Trailing Arms: $100 2 piece drive shaft: $75 72 A/C Cab w/ Clean Title (Bare): $350 67 Non A/C Cab w/ NO Title (Bare): $150 67 Fenders (Bare): $50 each In Cab Gas Tanks: $25 each Step Side Tail Gates: $50 each Front Bed Panel: $75 72 Grill w/ Insert and Brackets: $150 Headlight Trim Rings: $15 72 Painted Bumper: $50 Bumper Guards: SOLD Front Bumper Brackets (4): $40 Rear Bumper Brackets (4): SOLD Rear Bumper Bracket Covers: SOLD Cowls: $20 each Steering columns (3spd & Auto) : $40 each[ Outer Floor Rear Section Patch Panels (Galvanized?): $40 Hub caps: $10 each Vent Window: SOLD Emblems: $10 each Gauge Clusters: $25 each Burb Tank w/ Straps: SOLD Lenses: $5 each Light housings: $10 each Ram Horn Exhaust Manifolds: SOLD Bed Wheel Tub Splash Shield: $25 V8 Fan Shroud: $40 Intake Manifolds: $25 each Seat Brackets: $10 each Hood Hinge: $10 Motor Stands w/ Mounts: $50 Motor Stands w/o Mounts: $25 Headers: $50 Windshield Trim: $30 each Windshields: $100 each Big Back Glass: $50 each Valve Covers: $30 Window Shades: $10 each PS Setup: SOLD Seat belts (Retractor ends only): $20 Wiper Switch: $20 Feel free to ask about anything else you see. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152 Last edited by wancosc356; 11-15-2009 at 12:22 PM. Reason: Update

10-05-2009, 10:46 AM	#2
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Boy Do I Have Some Parts!!! __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

10-05-2009, 10:49 AM	#3
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Boy Do I Have Some Parts!!! __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152 Last edited by wancosc356; 10-19-2009 at 09:45 PM. Reason: UPDATE

10-05-2009, 10:51 AM	#4
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Boy Do I Have Some Parts!!! __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152 Last edited by wancosc356; 10-19-2009 at 09:46 PM. Reason: UPDATE

10-05-2009, 10:53 AM	#5
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Boy Do I Have Some Parts!!! __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152 Last edited by wancosc356; 10-19-2009 at 09:46 PM. Reason: UPDATE

10-05-2009, 11:36 AM	#6
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,346	Re: Boy Do I Have Some Parts!!! any idea on cost to ship the burb tank to 43615? Thx.

10-05-2009, 12:04 PM	#7
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Boy Do I Have Some Parts!!! How much for the PS setup? and yellow and black hub cap? Is this stuff in SC??...If so, where??....Thanks __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present Last edited by gcburdic; 10-05-2009 at 12:06 PM.

10-05-2009, 12:27 PM	#8
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	Re: Boy Do I Have Some Parts!!! third post secont pic. How much for the window vent shades shipped to 16635. Jason Last edited by jay_shy; 10-05-2009 at 12:27 PM.

10-05-2009, 12:30 PM	#9
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Boy Do I Have Some Parts!!! How much for the seat belts in the yellow and white cab. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

10-05-2009, 12:40 PM	#10
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Boy Do I Have Some Parts!!! Condition of front and rear windshield molding? Shipping to 95326...Thanks! __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

10-05-2009, 01:38 PM	#11
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,855	Re: Boy Do I Have Some Parts!!! mike!! bring me the 71 72 front brake lines if therye in goo shape. also the motor mounts so I can see if theyre for a big block. seeing as how Ill need them now. oh!! also the rear bumper brackets, can you post a pic.? you know I need those and the the guards too. __________________ 1967custom Last edited by michael bustamante; 10-05-2009 at 01:39 PM.

10-05-2009, 01:40 PM	#12
dabels23 Registered User Join Date: Sep 2009 Location: Eudora, KS Posts: 131	Re: Boy Do I Have Some Parts!!! What do the headers fit

10-05-2009, 02:50 PM	#14
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,855	Re: Boy Do I Have Some Parts!!! man I sure would appreciate that! Im doing the conversion on my 67 now and I cant afford to get some made for me right now. thank you very much big orange. I can only imagine what a 15 year old collection looks like!! __________________ 1967custom Last edited by michael bustamante; 10-05-2009 at 02:52 PM.

10-05-2009, 03:29 PM	#16
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,855	Re: Boy Do I Have Some Parts!!! headers are for sbc. damn I thought you drove man. can you ship the lines that big orange is gonna hook me up with, shoot me a quote and ill get you the money, also I just need the driver side rear bumper mounts and guard. but if worse comes to worse Ill get the set from you. any word on that vent window? I know I know, I ask too much of you!! I think youre right too. those are sbc mounts. __________________ 1967custom

10-05-2009, 04:14 PM	#18
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Boy Do I Have Some Parts!!! I am interested in the windshield chrome trim please. Front and rear. Shipped to 95357. And what shape are they in. Thank you! __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal



Register or Log In To remove these advertisements.

10-05-2009, 04:27 PM	#19
silver7 Registered User Join Date: Jul 2009 Location: High Point, NC Posts: 613	Re: Boy Do I Have Some Parts!!! Interested in the grill if no one has claimed it yet. Is there any damage? Couldn't tell from pics. Thanks.

10-05-2009, 04:44 PM	#20
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,855	Re: Boy Do I Have Some Parts!!! ok mike I pm`d you on all that! __________________ 1967custom

10-05-2009, 05:39 PM	#22
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	Re: Boy Do I Have Some Parts!!! How much to total to ship the the best right one and the best left one to 16635? One of each. Jason

10-05-2009, 06:08 PM	#24
mup123 Registered User Join Date: May 2009 Location: Paradise Newfoundland Canada Posts: 183	Re: Boy Do I Have Some Parts!!! I'm interested in both rams horn manifolds. Are they in good shape and how much to ship them to 27028?

10-05-2009, 06:24 PM	#25
gopokes Registered User Join Date: Nov 2008 Location: Oklahoma City Oklahoma Posts: 431	Re: Boy Do I Have Some Parts!!! Have you sold the PS setup yet?

Register or Log In To remove these advertisements.