Kayline or Bestop Softop - The 1947 - Present Chevrolet & GMC Truck Message Board Network

robs71k5 · 10-06-2009, 01:14 AM

Does anyone have any pics of how the Bestop and Kayline softops came from factory installed along the winshield ? Where they snaps or 'c' extruded channel or was there something GM had rigged for the adaption . I have made I mold of my windshield and also did a part off the mold and its nealy ready to install but dont have top yet . I'm looking for a Safari type softop. I dont want the snaps in any circumstances and that leaves the 'c' channel. but I'm looking for p/n of the channel they used if thats the case. By the way this mold is now for sale and I believe it might be a good investment for Softopper or anyone affiliated with Softopper Name: IMGP1405.jpg
Views: 186
Size: 35.1 KB

Name: IMGP1405.jpg
Views: 186
Size: 35.1 KB

.

Not sure if this ends up in the correct forum .Please move as required Thanks

**Yukon Jack** · 10-06-2009, 07:30 AM

Nice!! You ought to contact that company - would be a nice item to have available. You going to offer some for sale to boardmembers?

bouncytruck · 10-06-2009, 11:06 AM

Kayline and Bestop both use snaps to my knowledge (I had a kayline so I know they do). The STC Fastrac is the only one that I know of that uses a channel across the windsheild header. There are still 4 snaps with the Fastrac - one on each side of the channel, and one on each of the A=pillars just below the drip rail. I have a PDF of the STC install instructions. If you PM me your email address, I'll send it to you.

Big J · 10-06-2009, 07:22 PM

Now thats just neat. Nice job.

10-06-2009, 01:14 AM	#1
robs71k5 K5drive Join Date: Nov 2004 Location: burnaby BC Canada Posts: 815	Kayline or Bestop Softop Does anyone have any pics of how the Bestop and Kayline softops came from factory installed along the winshield ? Where they snaps or 'c' extruded channel or was there something GM had rigged for the adaption . I have made I mold of my windshield and also did a part off the mold and its nealy ready to install but dont have top yet . I'm looking for a Safari type softop. I dont want the snaps in any circumstances and that leaves the 'c' channel. but I'm looking for p/n of the channel they used if thats the case. By the way this mold is now for sale and I believe it might be a good investment for Softopper or anyone affiliated with Softopper . Not sure if this ends up in the correct forum .Please move as required Thanks

10-06-2009, 07:30 AM	#2
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: Kayline or Bestop Softop Nice!! You ought to contact that company - would be a nice item to have available. You going to offer some for sale to boardmembers? __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

10-06-2009, 11:06 AM	#3
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: Kayline or Bestop Softop Kayline and Bestop both use snaps to my knowledge (I had a kayline so I know they do). The STC Fastrac is the only one that I know of that uses a channel across the windsheild header. There are still 4 snaps with the Fastrac - one on each side of the channel, and one on each of the A=pillars just below the drip rail. I have a PDF of the STC install instructions. If you PM me your email address, I'll send it to you. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

10-06-2009, 07:22 PM	#4
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,772	Re: Kayline or Bestop Softop Now thats just neat. Nice job. __________________ BAZINGA! My Build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.