VA 72 lwb chevy parting out soon - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 10-09-2009, 09:57 PM

i would like to sale the eng. before i start tearing it apart so someone can hear it run and drive it around the driveway.
i will double check but it looks like a 350 eng oil pan to carb for $400.00 . no noice or smoke runs good i drove it home about 100 miles.
auto trans shifts smooth i haven't looked to see if it's a 400 or a 350 yet $200.00
good driver tailgate perty straight with only surface rust from what i could tell $175.00.
i will price the other parts as i take them off . but like i said earlier i would like to leave everything that needs to be left on till i sale the eng.

billsbowtie · 10-09-2009, 09:57 PM

billsbowtie · 10-09-2009, 09:58 PM

eng holds good oil pressure and runs cool.

386kustoms · 10-09-2009, 10:05 PM

im interested in the tail gate, can i have some better close up pics of the rusty areas or any bad dammage?

billsbowtie · 10-09-2009, 10:15 PM

i forgot to mention i don't ship large items. sorry

386kustoms · 10-09-2009, 10:17 PM

thats ok im going to kingsport tn in a little bit so i can pick up up then

billsbowtie · 10-09-2009, 10:26 PM

oh ok i will post more pic.s sat. i am only 1 hour and 15 mins from kingsport tn.

Cyclone44 · 10-10-2009, 09:44 AM

How is the wiring in it Bill?

billsbowtie · 10-10-2009, 01:18 PM

i havn't checked it yet george.

Cyclone44 · 10-10-2009, 01:42 PM

Can you get the numbers off of the front pad Bill? Thanks George

billsbowtie · 10-10-2009, 03:05 PM

here are some more pic.s of the tail gate . i don't see any dents or rust other than maybe a little surface.
george i don't understand what you want.

billsbowtie · 10-10-2009, 03:06 PM

billsbowtie · 10-10-2009, 03:08 PM

Cyclone44 · 10-10-2009, 03:09 PM

In front of the left head pass side their is a stamping pad with the engine code on it, can you post those numbers when you get a chance?

billsbowtie · 10-10-2009, 03:10 PM

thats it

billsbowtie · 10-10-2009, 03:12 PM

oh it has a/c on it i will try to see if i can read them. that is a good running eng.

billsbowtie · 10-10-2009, 04:42 PM

1 more pic. of tailgate.

billsbowtie · 10-10-2009, 04:44 PM

george eng says v1220tbj i got 71 350 out of that. let me know what you get.

Cyclone44 · 10-10-2009, 07:59 PM

Bill the TBJ was used three times....Yours is most likley the 71 but without the date code you can't say for 100% sure....Thanks George

1971-350
1979-350
1982-305

386kustoms · 10-10-2009, 08:46 PM

thanx for the pics of the gate. only question i have is if there is any rust on the very bottom of the gate when it is closed. that is usually where they start to rust.

billsbowtie · 10-10-2009, 10:02 PM

i felt under there and didn't feel any but i will lay down and look at it when it's dry maybe sunday. bill

billsbowtie · 10-11-2009, 06:31 PM

i looked at it today it is soild as a rock under neith. i think i priced it to cheap but thats my bad.

billsbowtie · 10-11-2009, 09:35 PM

heres a couple pic.s of it.

billsbowtie · 10-11-2009, 09:36 PM

billsbowtie · 10-12-2009, 03:08 PM

ttt

10-09-2009, 09:57 PM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	72 lwb chevy parting out soon i would like to sale the eng. before i start tearing it apart so someone can hear it run and drive it around the driveway. i will double check but it looks like a 350 eng oil pan to carb for $400.00 . no noice or smoke runs good i drove it home about 100 miles. auto trans shifts smooth i haven't looked to see if it's a 400 or a 350 yet $200.00 good driver tailgate perty straight with only surface rust from what i could tell $175.00. i will price the other parts as i take them off . but like i said earlier i would like to leave everything that needs to be left on till i sale the eng. __________________ i have 67/72 chevy truck parts f/s.

10-09-2009, 09:57 PM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 72 lwb chevy parting out soon __________________ i have 67/72 chevy truck parts f/s.

10-09-2009, 09:58 PM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 72 lwb chevy parting out soon eng holds good oil pressure and runs cool. __________________ i have 67/72 chevy truck parts f/s.

10-09-2009, 10:05 PM	#4
386kustoms Registered User Join Date: Feb 2009 Location: deland florida Posts: 117	Re: 72 lwb chevy parting out soon im interested in the tail gate, can i have some better close up pics of the rusty areas or any bad dammage?

10-09-2009, 10:15 PM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 72 lwb chevy parting out soon i forgot to mention i don't ship large items. sorry __________________ i have 67/72 chevy truck parts f/s.

10-09-2009, 10:17 PM	#6
386kustoms Registered User Join Date: Feb 2009 Location: deland florida Posts: 117	Re: 72 lwb chevy parting out soon thats ok im going to kingsport tn in a little bit so i can pick up up then

10-09-2009, 10:26 PM	#7
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 72 lwb chevy parting out soon oh ok i will post more pic.s sat. i am only 1 hour and 15 mins from kingsport tn. __________________ i have 67/72 chevy truck parts f/s.

10-10-2009, 09:44 AM	#8
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: 72 lwb chevy parting out soon How is the wiring in it Bill?

10-10-2009, 01:18 PM	#9
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 72 lwb chevy parting out soon i havn't checked it yet george. __________________ i have 67/72 chevy truck parts f/s.

10-10-2009, 01:42 PM	#10
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: 72 lwb chevy parting out soon Can you get the numbers off of the front pad Bill? Thanks George

10-10-2009, 03:05 PM	#11
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 72 lwb chevy parting out soon here are some more pic.s of the tail gate . i don't see any dents or rust other than maybe a little surface. george i don't understand what you want. __________________ i have 67/72 chevy truck parts f/s.

10-10-2009, 03:06 PM	#12
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 72 lwb chevy parting out soon __________________ i have 67/72 chevy truck parts f/s.

10-10-2009, 03:08 PM	#13
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 72 lwb chevy parting out soon __________________ i have 67/72 chevy truck parts f/s.

10-10-2009, 03:09 PM	#14
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: 72 lwb chevy parting out soon In front of the left head pass side their is a stamping pad with the engine code on it, can you post those numbers when you get a chance?

10-10-2009, 03:10 PM	#15
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 72 lwb chevy parting out soon thats it __________________ i have 67/72 chevy truck parts f/s.



Register or Log In To remove these advertisements.

10-10-2009, 03:12 PM	#16
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 72 lwb chevy parting out soon oh it has a/c on it i will try to see if i can read them. that is a good running eng. __________________ i have 67/72 chevy truck parts f/s.

10-10-2009, 04:42 PM	#17
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 72 lwb chevy parting out soon 1 more pic. of tailgate. __________________ i have 67/72 chevy truck parts f/s.

10-10-2009, 04:44 PM	#18
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 72 lwb chevy parting out soon george eng says v1220tbj i got 71 350 out of that. let me know what you get. __________________ i have 67/72 chevy truck parts f/s.

10-10-2009, 07:59 PM	#19
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: 72 lwb chevy parting out soon Bill the TBJ was used three times....Yours is most likley the 71 but without the date code you can't say for 100% sure....Thanks George 1971-350 1979-350 1982-305

10-10-2009, 08:46 PM	#20
386kustoms Registered User Join Date: Feb 2009 Location: deland florida Posts: 117	Re: 72 lwb chevy parting out soon thanx for the pics of the gate. only question i have is if there is any rust on the very bottom of the gate when it is closed. that is usually where they start to rust.

10-10-2009, 10:02 PM	#21
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 72 lwb chevy parting out soon i felt under there and didn't feel any but i will lay down and look at it when it's dry maybe sunday. bill __________________ i have 67/72 chevy truck parts f/s.

10-11-2009, 06:31 PM	#22
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 72 lwb chevy parting out soon i looked at it today it is soild as a rock under neith. i think i priced it to cheap but thats my bad. __________________ i have 67/72 chevy truck parts f/s.

10-11-2009, 09:35 PM	#23
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 72 lwb chevy parting out soon heres a couple pic.s of it. __________________ i have 67/72 chevy truck parts f/s.

10-11-2009, 09:36 PM	#24
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 72 lwb chevy parting out soon __________________ i have 67/72 chevy truck parts f/s.

10-12-2009, 03:08 PM	#25
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 72 lwb chevy parting out soon ttt __________________ i have 67/72 chevy truck parts f/s.

Register or Log In To remove these advertisements.