Factory emblems for 67 GMC's? Maybe GMC Paul can answer? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mountain Man · 01-17-2003, 11:21 PM

In looking in the catalogs such as LMC, there does not appear to be any factory emblems that go on quarter panels for 67 GMC's.

Some one told me that GMC Customs had a "Custom" , emblem mounted on the door, approx. just below the door glass, centered in the middle. This would be the same place that it was mounted on the Chevrolets.

Can any on confirm this?

Longhorn Man · 01-17-2003, 11:32 PM

It is actually closer to the door handle...right at the crease. I have them on my GMC, but no pics of them. Might be able to get a pic later if no one beats me too it.

Mountain Man · 01-17-2003, 11:37 PM

Thanks Longhornmail, I would appreciate any pic you might be able to get.

**Classic Heartbeat** · 01-17-2003, 11:43 PM

We have them listed in our emblems section of our website. Here is a link: http://www.classicheartbeat.com/emblems.htm Scroll down to where it says custom door emblems, then click on it and a picture of them will come up. They are the same for Chevrolet as they are GMCs. WES www.ClassicHeartbeat.com

Longhorn Man · 01-17-2003, 11:52 PM

This is the proper style for a 69...earlier models I am not 100% sure on.

Dan72cst · 01-18-2003, 02:31 AM

My 67 GMC had custom emblems on the fenders that I haven't seen reproduced (haven't even looked lately though) I don't have a picture, but they kinda looked like a Trans Am fender vent thingy that said custom across the top. I think WES ended up with the emblems after I parted it out. There was nothing on the doors, but it had been repainted.

**Tim Christian** · 01-18-2003, 10:53 AM

Here is a picture of factory correct on a 67.

Mountain Man · 01-18-2003, 04:05 PM

Wes, thanks a bunch , those are the ones I am looking for.

Can you do orders to Canada?, If so, I will get back on your website and order them.

These mount just below the door window glass, in about the middle of the door, right?

thanks

01-17-2003, 11:21 PM	#1
Mountain Man Registered User Join Date: Jan 2002 Location: Calgary, Alberta, Canada Posts: 451	Factory emblems for 67 GMC's? Maybe GMC Paul can answer? In looking in the catalogs such as LMC, there does not appear to be any factory emblems that go on quarter panels for 67 GMC's. Some one told me that GMC Customs had a "Custom" , emblem mounted on the door, approx. just below the door glass, centered in the middle. This would be the same place that it was mounted on the Chevrolets. Can any on confirm this? __________________ 72 C10 Cheyenne Super Full trim Factory tach dash A/C dash Factory tilt 350 / 350 power train - with Edelbrock components.

01-17-2003, 11:37 PM	#3
Mountain Man Registered User Join Date: Jan 2002 Location: Calgary, Alberta, Canada Posts: 451	Thanks Longhornmail, I would appreciate any pic you might be able to get. __________________ 72 C10 Cheyenne Super Full trim Factory tach dash A/C dash Factory tilt 350 / 350 power train - with Edelbrock components.

01-17-2003, 11:43 PM	#4
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	We have them listed in our emblems section of our website. Here is a link: http://www.classicheartbeat.com/emblems.htm Scroll down to where it says custom door emblems, then click on it and a picture of them will come up. They are the same for Chevrolet as they are GMCs. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

01-17-2003, 11:52 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	This is the proper style for a 69...earlier models I am not 100% sure on. Attached Images

01-18-2003, 02:31 AM	#6
Dan72cst Registered User Join Date: Feb 2001 Location: Lake Stevens,WA 98258 North of Seattle Posts: 833	My 67 GMC had custom emblems on the fenders that I haven't seen reproduced (haven't even looked lately though) I don't have a picture, but they kinda looked like a Trans Am fender vent thingy that said custom across the top. I think WES ended up with the emblems after I parted it out. There was nothing on the doors, but it had been repainted. __________________ Marysville, WA (Dan72cst@hotmail.com) 72 4wd Blazer CST 350/350 72 4wd Chevy LWB 350/350 68 2wd Chevy LWB 327/400

01-17-2003, 11:32 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	It is actually closer to the door handle...right at the crease. I have them on my GMC, but no pics of them. Might be able to get a pic later if no one beats me too it.

01-18-2003, 10:53 AM	#7
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Here is a picture of factory correct on a 67. Attached Images

01-18-2003, 04:05 PM	#8
Mountain Man Registered User Join Date: Jan 2002 Location: Calgary, Alberta, Canada Posts: 451	Wes, thanks a bunch , those are the ones I am looking for. Can you do orders to Canada?, If so, I will get back on your website and order them. These mount just below the door window glass, in about the middle of the door, right? thanks __________________ 72 C10 Cheyenne Super Full trim Factory tach dash A/C dash Factory tilt 350 / 350 power train - with Edelbrock components.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.