UT blazer seats and GMC grill - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**SOON2BLAZE** · 10-20-2009, 05:47 PM

blazer bucket seats with all mounts. driver side needs new seat bun, passanger side is in good condition. Has white plastic backs on seats there is a 1" crack where a screw hole is on the plastic back. 175. + shipping SOLD!

1968 GMC grill with filler panel. IIRC grill will work on all gmc's, but filler panel will only work on 67/68's No dents or dings, has headlight bezels, minor surface rust on bottom area (pictured) and on the back 125. + shipping

**yellowblazer1969** · 10-20-2009, 06:55 PM

ill take the seats if the tracks are complete and not broken or roted.

thanks, chris

**SOON2BLAZE** · 10-20-2009, 10:29 PM

pm'd ya. no broken tracks, all mounts are there.

**yellowblazer1969** · 10-20-2009, 11:03 PM

Pm sent on shipping

thanks, chris

Quote:

Originally Posted by SOON2BLAZE

pm'd ya. no broken tracks, all mounts are there.

Baby John · 10-21-2009, 09:12 AM

I might be interested in the grill. When you say the filler panel will only fit 67 & 68 what exactly do you mean? I'm new to these trucks but am trying to restore a 72 and my grille has a few dents in it. Actually from what I've seen in some LMC catalogs I think I actually have a 67 or 68 grille in mine now but I'm not sure what you mean by filler panel. I'd also like some better pictures if you could please. Specifically of the rust. Would you say the rust could be polished off with some steel wool?

**SOON2BLAZE** · 10-21-2009, 10:46 AM

the white panel that is mounted on top of the grill in the pic. Yes it most likely could be buffed out. will post more pics tonight. SEATS SOLD PENDING TO yb69

Baby John · 10-21-2009, 11:56 AM

Quote:

Originally Posted by SOON2BLAZE

the white panel that is mounted on top of the grill in the pic. Yes it most likely could be buffed out. will post more pics tonight. SEATS SOLD PENDING TO yb69

Thanks. Please put me in line for the grill with bezels pending review and confirmation that it will work on our '72 and I need to really figure out what the filler panels is.

On our truck there is a chrome piece that's mounted/rivetted to the top of the grill and there are chrome trim pieces that wrap around the grill that mount to the front edges of the fenders. I'm pretty sure this is the piece you're talking about.

I was planning on doing away with those pieces when we re-paint. Might post this question in another forum as to whether or not this can be done. I have already noticed that the hood latch is attached to this piece so I know if I delete it I'll have to figure out some spacers or something to keep that hood latch in the right spot.

**SOON2BLAZE** · 10-21-2009, 08:54 PM

new pics posted

rico7769 · 10-21-2009, 09:30 PM

how much to ship the grill to 30907? How would you rate the finish 1-10 on the piece overall. The bumper will cover most of the bottom rail if that's where the most rust is.

**special-K** · 10-22-2009, 06:37 AM

Quote:

Originally Posted by Baby John

Thanks. Please put me in line for the grill with bezels pending review and confirmation that it will work on our '72 and I need to really figure out what the filler panels is.

On our truck there is a chrome piece that's mounted/rivetted to the top of the grill and there are chrome trim pieces that wrap around the grill that mount to the front edges of the fenders. I'm pretty sure this is the piece you're talking about.

I was planning on doing away with those pieces when we re-paint. Might post this question in another forum as to whether or not this can be done. I have already noticed that the hood latch is attached to this piece so I know if I delete it I'll have to figure out some spacers or something to keep that hood latch in the right spot.

You need to keep that surround trim if you aren`t changing to a 67/68 grille.That`s why the top bar is 67/68-only.The grille itself is the same 68-70.

I`d like a shipping quote to 21771 or,if Greyhound,cost to Frederick,MD or Baltimore,MD.

**SOON2BLAZE** · 10-22-2009, 08:03 AM

I'll get shipping quotes this morning

Baby John · 10-22-2009, 09:26 AM

OK, I've found out what I needed to know about whether or not the grill will work on my 72 so count me in. Just let me know what the total will be with shipping to 39114 and I'll send you a check. In fact I'll PM you my full address.

**SOON2BLAZE** · 10-22-2009, 12:31 PM

All parts sold!

10-20-2009, 05:47 PM	#1
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	blazer seats and GMC grill blazer bucket seats with all mounts. driver side needs new seat bun, passanger side is in good condition. Has white plastic backs on seats there is a 1" crack where a screw hole is on the plastic back. 175. + shipping SOLD! 1968 GMC grill with filler panel. IIRC grill will work on all gmc's, but filler panel will only work on 67/68's No dents or dings, has headlight bezels, minor surface rust on bottom area (pictured) and on the back 125. + shipping Attached Images Last edited by SOON2BLAZE; 10-21-2009 at 08:47 PM. Reason: info / pics

10-20-2009, 06:55 PM	#2
yellowblazer1969 Registered User Join Date: Jul 2004 Location: columbia sc Posts: 387	Re: blazer seats and GMC grill ill take the seats if the tracks are complete and not broken or roted. thanks, chris __________________ YELLOWBLAZER1969

10-20-2009, 10:29 PM	#3
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	Re: blazer seats and GMC grill pm'd ya. no broken tracks, all mounts are there.

10-21-2009, 09:12 AM	#5
Baby John Registered User Join Date: Jul 2007 Location: Mendenhall MS Posts: 222	Re: blazer seats and GMC grill I might be interested in the grill. When you say the filler panel will only fit 67 & 68 what exactly do you mean? I'm new to these trucks but am trying to restore a 72 and my grille has a few dents in it. Actually from what I've seen in some LMC catalogs I think I actually have a 67 or 68 grille in mine now but I'm not sure what you mean by filler panel. I'd also like some better pictures if you could please. Specifically of the rust. Would you say the rust could be polished off with some steel wool? Last edited by Baby John; 10-21-2009 at 09:15 AM.

10-21-2009, 10:46 AM	#6
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	Re: blazer seats and GMC grill the white panel that is mounted on top of the grill in the pic. Yes it most likely could be buffed out. will post more pics tonight. SEATS SOLD PENDING TO yb69 Last edited by SOON2BLAZE; 10-21-2009 at 10:54 AM. Reason: changes

10-21-2009, 08:54 PM	#8
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	Re: blazer seats and GMC grill new pics posted

10-21-2009, 09:30 PM	#9
rico7769 Hybrid67 Join Date: Jan 2009 Location: Martinez, GA Posts: 195	Re: blazer seats and GMC grill how much to ship the grill to 30907? How would you rate the finish 1-10 on the piece overall. The bumper will cover most of the bottom rail if that's where the most rust is. __________________ Keep em' Running! All show.....no go

10-22-2009, 08:03 AM	#11
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	Re: blazer seats and GMC grill I'll get shipping quotes this morning

10-22-2009, 09:26 AM	#12
Baby John Registered User Join Date: Jul 2007 Location: Mendenhall MS Posts: 222	Re: blazer seats and GMC grill OK, I've found out what I needed to know about whether or not the grill will work on my 72 so count me in. Just let me know what the total will be with shipping to 39114 and I'll send you a check. In fact I'll PM you my full address.

10-22-2009, 12:31 PM	#13
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	Re: blazer seats and GMC grill All parts sold!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.