Show me your exhaust tips and exits - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sourkraut · 10-20-2009, 10:18 PM

I have bought a set of 4" SS exhaust tips and am having a hard time deciding were to have them exit. I figured you guys could help or give me some ideas.

big_al_71 · 10-20-2009, 11:47 PM

here is mine 2 1/2 inch

BAGNDRAGIT · 10-21-2009, 12:23 AM

mine w/ 3 inch tips & 2.5 pipes. they are no longer.

basemodel67 · 10-21-2009, 03:39 AM

When I get to that point on my truck, I want to get the exhaust to exit where the license plate normally goes. Difficulty a 9, I'm assuming...

sourkraut · 10-21-2009, 06:36 AM

big al, I love were yours comes out. Is that the width of the frame, roughly.

big_al_71 · 10-21-2009, 07:44 AM

Quote:

Originally Posted by sourkraut

big al, I love were yours comes out. Is that the width of the frame, roughly.

yes it is, we used the notches on the rear bumper as a guide.....

here is another angle....

sourkraut · 10-21-2009, 08:02 AM

awesome! this is what I was looking for! here is were I stopped on mine and now I have an idea of were to run them and how the end product will look. I just did not know whether i wanted to run inside, under or outside frame. I think I will aim for outside to end up like yours. I like when the tips are on either side of the plate but reminds me to much of a annoying 4 cycl. minitruck look, for some reason??? great I really appreciate it big al this give me major direction and motivation.

big_al_71 · 10-21-2009, 08:15 AM

Quote:

Originally Posted by sourkraut

awesome! this is what I was looking for! here is were I stopped on mine and now I have an idea of were to run them and how the end product will look. I just did not know whether i wanted to run inside, under or outside frame. I think I will aim for outside to end up like yours. I like when the tips are on either side of the plate but reminds me to much of a annoying 4 cycl. minitruck look, for some reason??? great I really appreciate it big al this give me major direction and motivation.

no problem I am glad I could help......post some picts once you are done...

**special-K** · 10-21-2009, 08:15 AM

That`s a great way to exit the pipes.They are just 'there",not trying to jump out at you.The vapors look cool rom there,too.And,you can`t beat the old "blowing dust of the road" affect of turn down pipes.
They look nice dumping down from behind the wheel wells,too,like the Camaros and Novas of the era.That`s a bit more factoryish and the rear is more hotrodish.I`ll always like the straight out under the bumper as a traditional trend on the right truck and the out behind the rear wheels at a 90 as a stockish look.

sourkraut · 10-21-2009, 08:37 AM

I have to agree with you Tim, that is awesome goosing it and makeing the dust flow. My last chopper was like that and man you could really p-off people!

I realize it has all been done before but trying to do something different with the 4" tips. I have to have the balogna tubes for the echo effect! Like you said Tim shooting for WOW but very subtle still. Is that possible??

Lippyp · 10-21-2009, 08:48 AM

4" stainless steel tips exiting just in front of the rear wheels

russj67 · 10-21-2009, 08:57 AM

I decided to have mine shoot straight out. It won't look so obnoxious when the roll pan is in. The tips will sit just below it and stick out about an inch. It does sound obnoxious, but that is what I wanted

wp silverado · 10-21-2009, 09:39 AM

right behind the rear tires, i angled them and tucked them so they are barely noticeable

**70cst** · 10-21-2009, 09:40 AM

Question on the loudness of the pipes...would the pipes coming out the back be much quieter than the rear wheels? Just a thought if that was an issue.

big_al_71 · 10-21-2009, 10:37 AM

here is a crappy cell phone video of my bucket...hopefully it will give you an idea remember this was taken from my blackberry so it is not the best quality...

YouTube - 71c10

tim21391 · 10-21-2009, 10:50 AM

YouTube - 1972 Chevrolet C-10 Flowmaster 40...

sourkraut · 10-21-2009, 11:05 AM

russj67 I love your truck and exhaust. wp I love the way yours is tucked up in also. big_al your truck sounds great! I think what my plans are is running along the frame for the width and keeping it tucked up in like the rest of the exhaust as not to be seen. once I get to the tips I think I will cut the blunt with maybe a few degree angle. they are cut right now reel sharp.

now to keep them tucked up in I think I might relieve the rear bumper to accept the tips kinda like the new dodge rams but without recess obviously in the bumper. I am thinking I will make it a 2" radius so that it takes al least have the tip.

sourkraut · 10-21-2009, 11:06 AM

Lord forgive me for posting this pix in this holy website!

sourkraut · 10-21-2009, 11:10 AM

tim2391 your truck sounds really good!

sourkraut · 10-21-2009, 11:14 AM

Quote:

Originally Posted by 70cst

Question on the loudness of the pipes...would the pipes coming out the back be much quieter than the rear wheels? Just a thought if that was an issue.

I dont know the answer to that question? i know if the exhaust is dumped to the ground it is louder but as far as parallel to the ground I dont think it would be louder wer it comes out??

Jim_PA · 10-21-2009, 11:20 AM

I'm not a big fan of under the bumper. I prefer it like the way I have it. Have been thinking about angle cutting these tips, or adding some 3" tips. Probably just do a little angle cut on what I have.

sourkraut · 10-21-2009, 11:23 AM

I have thought of having that exit and reieving the fender but saw one like tht at truck carsisle and it just did not do it for me.

UltraBlue71 · 10-21-2009, 11:30 AM

I like them straight out the back, untill you are hooking up a trailer and you have to hack and gag on those exhaust fumes!

Alot of these trucks arent towing anything so its a moot point

Sometimes they look cool coming out in front of the tire too
I especially like this look on Shortbed 4WD trucks

Just dont put semitruck-smokestacks like the diesel crowd is doing!

sourkraut · 10-21-2009, 11:36 AM

I know I dont like the smoke stacks either! however they do sound good and I love the smoke they put out and in the cars behind them!!

UltraBlue71 · 10-21-2009, 01:13 PM

[QUOTE=big_al_71;3578725]here is a crappy cell phone video of my bucket...hopefully it will give you an idea remember this was taken from my blackberry so it is not the best quality...

Sounds like she has a big ole lopey cam....cool

I had to cut mine off when put my gas tank in, (poor planning on my part) now it just ends 2 inches after the magnaflows, right in fron of the rear axle, but I kinda like not having any pipes come out at all too.

10-20-2009, 10:18 PM	#1
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Show me your exhaust tips and exits I have bought a set of 4" SS exhaust tips and am having a hard time deciding were to have them exit. I figured you guys could help or give me some ideas. __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

10-20-2009, 11:47 PM	#2
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Show me your exhaust tips and exits here is mine 2 1/2 inch Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

10-21-2009, 12:23 AM	#3
BAGNDRAGIT Just Not Low Enough! Join Date: Mar 2009 Location: Phoenix, AZ Posts: 525	Re: Show me your exhaust tips and exits mine w/ 3 inch tips & 2.5 pipes. they are no longer. __________________ NEED ELECTRICAL HELP? ASK ME! 67-72 Full Wiring Diagrams Lots Of Info, TAKE A LOOK 1967 Chevy C-10 Shortbox Bagged 327 4spd Previous: 1971 Chevy C-10 Short Sep I6 Auto (Traded) 1973 Chevy C-20 THE REDNECK BATTLE TRUCK 2001 Chevy Silverado 2Dr 5.3L Shortbox. R.I.P. 1969 Volkswagen Bug This is my first meeting, I have a horsepower problem.

10-21-2009, 03:39 AM	#4
basemodel67 Factory Strippers Rule! Join Date: Mar 2009 Location: Shingle Springs, CA Posts: 707	Re: Show me your exhaust tips and exits When I get to that point on my truck, I want to get the exhaust to exit where the license plate normally goes. Difficulty a 9, I'm assuming... __________________ "Feast your eyes on a feast of smoke." 67 Chevy Short Fleet PLAN: LQ9, 4L60, D60 Looking for School Bus Gauges - Help me out!

10-21-2009, 06:36 AM	#5
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: Show me your exhaust tips and exits big al, I love were yours comes out. Is that the width of the frame, roughly. __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

10-21-2009, 08:02 AM	#7
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: Show me your exhaust tips and exits awesome! this is what I was looking for! here is were I stopped on mine and now I have an idea of were to run them and how the end product will look. I just did not know whether i wanted to run inside, under or outside frame. I think I will aim for outside to end up like yours. I like when the tips are on either side of the plate but reminds me to much of a annoying 4 cycl. minitruck look, for some reason??? great I really appreciate it big al this give me major direction and motivation. Attached Images __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

10-21-2009, 08:15 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: Show me your exhaust tips and exits That`s a great way to exit the pipes.They are just 'there",not trying to jump out at you.The vapors look cool rom there,too.And,you can`t beat the old "blowing dust of the road" affect of turn down pipes. They look nice dumping down from behind the wheel wells,too,like the Camaros and Novas of the era.That`s a bit more factoryish and the rear is more hotrodish.I`ll always like the straight out under the bumper as a traditional trend on the right truck and the out behind the rear wheels at a 90 as a stockish look. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-21-2009, 08:37 AM	#10
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: Show me your exhaust tips and exits I have to agree with you Tim, that is awesome goosing it and makeing the dust flow. My last chopper was like that and man you could really p-off people! I realize it has all been done before but trying to do something different with the 4" tips. I have to have the balogna tubes for the echo effect! Like you said Tim shooting for WOW but very subtle still. Is that possible?? __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

10-21-2009, 08:48 AM	#11
Lippyp English Chevy Owner Join Date: May 2002 Location: Shropshire, UK/ Lot, France Posts: 1,848	Re: Show me your exhaust tips and exits 4" stainless steel tips exiting just in front of the rear wheels __________________ Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission

10-21-2009, 08:57 AM	#12
russj67 Registered User Join Date: Apr 2009 Location: Scappoose, OR Posts: 157	Re: Show me your exhaust tips and exits I decided to have mine shoot straight out. It won't look so obnoxious when the roll pan is in. The tips will sit just below it and stick out about an inch. It does sound obnoxious, but that is what I wanted __________________ 67 Stepside Atomic Orange Fastburn 385 TH350 The wheels are fronts are 255-45-18 with 5" bs. 18x8 wheel rears are 295-45-20 with 5" bs. 20x10 wheel (barely fit) Budget: A method for going broke methodically. You only live once!

10-21-2009, 09:39 AM	#13
wp silverado Registered User Join Date: Oct 2009 Location: sykesville MD Posts: 200	Re: Show me your exhaust tips and exits right behind the rear tires, i angled them and tucked them so they are barely noticeable __________________ 1967 c-10-built smallblock, backed by m-21, lowered 2005 silverado-tint, exhaust, lift, 35's 1964 c-10 shortbed project

10-21-2009, 09:40 AM	#14
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: Show me your exhaust tips and exits Question on the loudness of the pipes...would the pipes coming out the back be much quieter than the rear wheels? Just a thought if that was an issue. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

10-21-2009, 11:05 AM	#17
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: Show me your exhaust tips and exits russj67 I love your truck and exhaust. wp I love the way yours is tucked up in also. big_al your truck sounds great! I think what my plans are is running along the frame for the width and keeping it tucked up in like the rest of the exhaust as not to be seen. once I get to the tips I think I will cut the blunt with maybe a few degree angle. they are cut right now reel sharp. now to keep them tucked up in I think I might relieve the rear bumper to accept the tips kinda like the new dodge rams but without recess obviously in the bumper. I am thinking I will make it a 2" radius so that it takes al least have the tip. Attached Images __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

10-21-2009, 11:06 AM	#18
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: Show me your exhaust tips and exits Lord forgive me for posting this pix in this holy website! __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

10-21-2009, 11:10 AM	#19
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: Show me your exhaust tips and exits tim2391 your truck sounds really good! __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200



Register or Log In To remove these advertisements.

10-21-2009, 11:20 AM	#21
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Show me your exhaust tips and exits I'm not a big fan of under the bumper. I prefer it like the way I have it. Have been thinking about angle cutting these tips, or adding some 3" tips. Probably just do a little angle cut on what I have.

10-21-2009, 11:23 AM	#22
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: Show me your exhaust tips and exits I have thought of having that exit and reieving the fender but saw one like tht at truck carsisle and it just did not do it for me. __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

10-21-2009, 11:30 AM	#23
UltraBlue71 Registered User Join Date: Feb 2009 Location: OKC OK Posts: 489	Re: Show me your exhaust tips and exits I like them straight out the back, untill you are hooking up a trailer and you have to hack and gag on those exhaust fumes! Alot of these trucks arent towing anything so its a moot point Sometimes they look cool coming out in front of the tire too I especially like this look on Shortbed 4WD trucks Just dont put semitruck-smokestacks like the diesel crowd is doing! __________________ "You can put lipstick on a pig, sure it's pretty pig, but it's still just a PIG... 71 LWB Last edited by UltraBlue71; 10-21-2009 at 11:30 AM.

10-21-2009, 11:36 AM	#24
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: Show me your exhaust tips and exits I know I dont like the smoke stacks either! however they do sound good and I love the smoke they put out and in the cars behind them!! __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

10-21-2009, 01:13 PM	#25
UltraBlue71 Registered User Join Date: Feb 2009 Location: OKC OK Posts: 489	Re: Show me your exhaust tips and exits [QUOTE=big_al_71;3578725]here is a crappy cell phone video of my bucket...hopefully it will give you an idea remember this was taken from my blackberry so it is not the best quality... Sounds like she has a big ole lopey cam....cool I had to cut mine off when put my gas tank in, (poor planning on my part) now it just ends 2 inches after the magnaflows, right in fron of the rear axle, but I kinda like not having any pipes come out at all too. __________________ "You can put lipstick on a pig, sure it's pretty pig, but it's still just a PIG... 71 LWB Last edited by UltraBlue71; 10-21-2009 at 01:17 PM.

Register or Log In To remove these advertisements.