TX 1967 LWB Bed For Sale, No side marker lights - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67Mach1 · 10-28-2009, 07:43 AM

no longer for sale.

I'll make a trailer out of it or junk it sometime down the line. No hurry just thought id test the waters for a good soid long bed. WHo knows i may even try to shorten it. someday. After I finish all the other projets both in and out of the barn.

Thanks,

This bed has been repainted, and had a bed liner in it for years. This weekend I pulled the bed liner and found some scale under the bed but it easialy rubbed away with a stiff broom and my foot. I did nto find any rust that penetrated.

If I was keeping a long bed this is the bed I would use. a few small areas of what look to be bondo on the drivers side but could be just bad paint, I did not have a magnet to check. The "knock check" did not seem to detect anything either.

This bed is not perfect ,but considering what I have seen around on others is pretty darn good. This one has the bonus of no side marker lights if someone is looking to remove them from a 68-72 LWB, your job is done.

I would like $300.00 for the bed, If you want the complete rolling frame with the bed, $400.00 total ( less bumpers, drive shaft and transmision, I'll also need to remove the VIN from the frame as I am using the cab and clip for another project. This frame is a leaf spring GMC frame.

These prices are OBO and if you would like I could make this thing into a bed trailer for easier pickup( you pay for any parts).

Many photos.... I'll send them to email addresses if you like.

Sorry No shipping.

Thomas

67Mach1 · 10-28-2009, 07:47 AM

afew more.

67Mach1 · 10-28-2009, 06:48 PM

ttt

67Mach1 · 10-29-2009, 06:50 AM

Anyone at 300?

vasquezmrysvll · 10-29-2009, 12:38 PM

would you sell the tail light harness? shipped to 95901. thanks

67Mach1 · 10-30-2009, 11:24 AM

Quote:

Originally Posted by vasquezmrysvll

would you sell the tail light harness? shipped to 95901. thanks

I am not sure the wiring is still there. I'll have to check for you on my next visit to the farm on November 7th.

Come November 7th I may just make a trailer bed and pull add... I've always wanted one anyway and I can put the GMC tailgate back on and use my GMC to pull it.

67Mach1 · 10-31-2009, 09:29 AM

Quote:

Originally Posted by 67Mach1

I am not sure the wiring is still there. I'll have to check for you on my next visit to the farm on November 7th.

Come November 7th I may just make a trailer bed and pull add... I've always wanted one anyway and I can put the GMC tailgate back on and use my GMC to pull it.

after thinking about it more I am not goign to sell the bed. If I cant use it as a trailer I'll find somthing to do with it, Patch panels, scrap.

10-28-2009, 07:43 AM	#1
67Mach1 Senior Member Join Date: Nov 2005 Location: Round Rock, TX Posts: 1,100	1967 LWB Bed For Sale, No side marker lights no longer for sale. I'll make a trailer out of it or junk it sometime down the line. No hurry just thought id test the waters for a good soid long bed. WHo knows i may even try to shorten it. someday. After I finish all the other projets both in and out of the barn. Thanks, This bed has been repainted, and had a bed liner in it for years. This weekend I pulled the bed liner and found some scale under the bed but it easialy rubbed away with a stiff broom and my foot. I did nto find any rust that penetrated. If I was keeping a long bed this is the bed I would use. a few small areas of what look to be bondo on the drivers side but could be just bad paint, I did not have a magnet to check. The "knock check" did not seem to detect anything either. This bed is not perfect ,but considering what I have seen around on others is pretty darn good. This one has the bonus of no side marker lights if someone is looking to remove them from a 68-72 LWB, your job is done. I would like $300.00 for the bed, If you want the complete rolling frame with the bed, $400.00 total ( less bumpers, drive shaft and transmision, I'll also need to remove the VIN from the frame as I am using the cab and clip for another project. This frame is a leaf spring GMC frame. These prices are OBO and if you would like I could make this thing into a bed trailer for easier pickup( you pay for any parts). Many photos.... I'll send them to email addresses if you like. Sorry No shipping. Thomas Attached Images __________________ Soon to be selling all but one, or two... Depends on what the Boss has to say....... 67 GMC Shortbed 454 Project more junk and most of it is for sale Last edited by 67Mach1; 10-31-2009 at 10:56 AM.

10-28-2009, 07:47 AM	#2
67Mach1 Senior Member Join Date: Nov 2005 Location: Round Rock, TX Posts: 1,100	Re: 1967 LWB Bed For Sale, No side marker lights afew more. Attached Images __________________ Soon to be selling all but one, or two... Depends on what the Boss has to say....... 67 GMC Shortbed 454 Project more junk and most of it is for sale

10-28-2009, 06:48 PM	#3
67Mach1 Senior Member Join Date: Nov 2005 Location: Round Rock, TX Posts: 1,100	Re: 1967 LWB Bed For Sale, No side marker lights ttt __________________ Soon to be selling all but one, or two... Depends on what the Boss has to say....... 67 GMC Shortbed 454 Project more junk and most of it is for sale

10-29-2009, 06:50 AM	#4
67Mach1 Senior Member Join Date: Nov 2005 Location: Round Rock, TX Posts: 1,100	Re: 1967 LWB Bed For Sale, No side marker lights Anyone at 300? __________________ Soon to be selling all but one, or two... Depends on what the Boss has to say....... 67 GMC Shortbed 454 Project more junk and most of it is for sale

10-29-2009, 12:38 PM	#5
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: 1967 LWB Bed For Sale, No side marker lights would you sell the tail light harness? shipped to 95901. thanks __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.