|
10-31-2009, 11:51 PM
|
#1 |
|
Registered User
Join Date: Oct 2009
Location: finger lakes new york
Posts: 17
|
heres my new rig
new to this great site and enjoying it.new to me is my first pre 88 chevy truck.its a 78 3/4 ton 4x4.its got a 350 (runs good but smokes slightly)and its a 4 speed with a 205 transfer.the first picture is how it looked when i bought it.11ins of lift with 36in tires.the second picture is how it looks today 3ins of lift and 32in all terrain tires.it took a couple weekends to change out springs and remove the body lift but most of it was recent and not bad to work with.now it needs some electrical work for inspection backup lights,horn,hazards most of which was not made to work after the cab was swapped by the last owner.the new cab was from an automatic but has the original steering column swapped back in.there are cut wires every where.a plow will be next for personal use.
|
|
|
|
11-01-2009, 01:11 AM
|
#2 |
|
Registered User
Join Date: Apr 2009
Location: Reedley Ca
Posts: 360
|
Re: heres my new rig
Nice And welcome to the site
__________________
"There he goes. One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die." |
|
|
|
|
11-01-2009, 07:46 AM
|
#3 |
|
dang its hot
Join Date: Nov 2006
Location: frankfort kentucky
Posts: 1,349
|
Re: heres my new rig
sharp!
|
|
|
|
|
11-01-2009, 09:48 AM
|
#4 |
|
Still plays with trucks
Join Date: Jul 2009
Location: Spokane, WA
Posts: 3,556
|
Re: heres my new rig
Great truck. Just like mine. Good luck with the wiring.
|
|
|
|
|
11-01-2009, 10:17 AM
|
#5 |
|
Senior Member
Join Date: May 2004
Location: Binghamton, NY
Posts: 3,469
|
Re: heres my new rig
looks good. Still got those slots???
__________________
2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS |
|
|
|
|
11-01-2009, 11:53 AM
|
#6 |
|
Robert Olson Transport
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,313
|
Re: heres my new rig
very nice truck you have there,,,
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
|
|
|
|
11-01-2009, 09:16 PM
|
#7 |
|
Registered User
Join Date: Oct 2009
Location: finger lakes new york
Posts: 17
|
Re: heres my new rig
thanks for the kind words.got alot of things worked out on the truck today the fuse box was a mess some blown fuses and some were not the right amps.hazards work now, found the wire for the backups just hanging under the dash jumped the contacts and the backups worked, just need to pick up a switch to wire them to.did some rewiring to the stock horns and put in a button for them and they work great.now i think i need a new wiper switch and my wiper will work good.oh and i dont have the slots i traded them back to the owner and got alot better deal on the truck those tires were almost new. it wasnt easy the little boy in me said keep them.
|
|
|
|
|
11-02-2009, 12:23 AM
|
#8 |
|
Registered User
Join Date: Mar 2006
Location: east syracuse ny
Posts: 371
|
Re: heres my new rig
Its a nice looking truck for New York and welcome, what lake are you near?
__________________
1981 K-5 Blazer 2wd 1985 C-10 Short step 1988 C-10 Suburban 
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
