2003ish roof on a C10 at SEMA - The 1947 - Present Chevrolet & GMC Truck Message Board Network

98L150 · 11-02-2009, 05:57 PM

Here is a pics of a C10 i found online of a C10 that has a 2003ish reg food skin and door frames on it. Truck was built by Chassis by Aaron in California.

SANCHO · 11-02-2009, 06:03 PM

looks like it came off an 88-98 by the doors but could be wrong.

stueber68 · 11-02-2009, 06:05 PM

Wow!! I'm not sure I like the grille but that is some pretty nice fabrication to make make the top half of the cab what it is.
I think those are the body lines that match the 88-99 GM trucks more than being 99-up body. I love these trucks but I'm afraid I couldn't dedicate myself long enough to be able to do that. Really nice work!

**N2TRUX** · 11-02-2009, 06:06 PM

Quote:

Originally Posted by SANCHO

looks like it came off an 88-98 by the doors but could be wrong.

My thoughts too. Jeff are you sure that's not an 88-98 cab?

big_al_71 · 11-02-2009, 06:09 PM

Great job on that truck for sure!!!

Well here is a pict of my 90 454SS (Is for sale) for comparison to see if it is a 88-99 cab....

stueber68 · 11-02-2009, 06:11 PM

I don't think it would be the whole cab ... the body lines match up to well for the top of the fender and the roll at the bottom of the door.

1lowdiesel · 11-02-2009, 06:39 PM

wow very sick imo.

aaron can do amazing things with metal!!

watahyahknow · 11-02-2009, 07:14 PM

they mightve used the whole cab and doors peeled it like an orange below the beltline and made the doorskins from the C10 fit

dunno if its worth the difference other than it shows of there workmanship the roof seems higher than the original ...... next project topchop?

independentcustoms · 11-02-2009, 07:19 PM

Aaron is the absolute man when it comes to fab work.

Andy4639 · 11-02-2009, 08:15 PM

I like the fact of getting rid of the front windshield gasket. That is one thing I hate about our trucks. I like the flush look a lot better.

98L150 · 11-02-2009, 10:49 PM

yea is does look to be a 88-98 cab. here is a pic i found on chassis by aarons website showing the cab to be grafted on 67-72 cab.

**special-K** · 11-02-2009, 10:57 PM

That`s some real talent and alot o work.Just can`t beat what the General done,though.What impresses me is when someone takes something ugly and makes it look good.

kev2809 · 11-02-2009, 10:57 PM

wow...thats looks like a ton of work. i like the original roof better, but its some nice work

brad2 · 11-02-2009, 11:40 PM

I think this is the suspension on this truck.

mjensen · 11-02-2009, 11:45 PM

I have to agree with some posts above. Excellent workmanship, but I'm not a big fan of that look.

QKENUF4U · 11-03-2009, 12:19 AM

talking about going the hard way round to get one piece windows.....

67ChevyRedneck · 11-03-2009, 12:42 AM

Wow, that's impressive. The grill looks sweet.

nastyc10 · 11-03-2009, 02:33 AM

That chassis is sick!

OARNGESI · 11-03-2009, 05:18 AM

Wow that truck looks great id love to have it as is

SCOTI · 11-03-2009, 11:09 AM

Quote:

Originally Posted by nastyc10

That chassis is sick!

x2!

nvrsatisfied · 11-03-2009, 03:08 PM

crap again......i posted pics of it also, i think it looks good they did a great job, better than putting the newer beds on these models (jmo).......

72BlckButy · 11-03-2009, 03:20 PM

Awesome craftsmanship...

texanidiot25 · 11-03-2009, 05:02 PM

Only thing I'd change is a 2" chop to bring the green house down some. Always found them to be HUGE on the 88-98 trucks, but otherwise I like the look this truck has. Even the grille is a nice bit of work.

BADPURPLE70CHEVY · 11-03-2009, 05:33 PM

Have to say thats not my cup of tea but its a super nice truck. To have talent to do that kinda fab work is a blessing in its self. Not everyone can do that.

maddog1331 · 11-03-2009, 05:44 PM

Amazing craftsmanship, but personally I think it looks horrible. When I first saw it I thought it was an S-10 with the front clip from a 68.

Now, that being said, it is am amazing piece of work....just personally dont like how it looks.

11-02-2009, 05:57 PM	#1
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	2003ish roof on a C10 at SEMA Here is a pics of a C10 i found online of a C10 that has a 2003ish reg food skin and door frames on it. Truck was built by Chassis by Aaron in California. Attached Images __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

11-02-2009, 06:03 PM	#2
SANCHO Registered User Join Date: Jan 2009 Location: Cypress,Texas Posts: 62	Re: 2003ish roof on a C10 at SEMA looks like it came off an 88-98 by the doors but could be wrong.

11-02-2009, 06:05 PM	#3
stueber68 1968 C20 Vortec Beast Join Date: Jun 2005 Location: STILLWATER,OKLAHOMA Posts: 483	Re: 2003ish roof on a C10 at SEMA Wow!! I'm not sure I like the grille but that is some pretty nice fabrication to make make the top half of the cab what it is. I think those are the body lines that match the 88-99 GM trucks more than being 99-up body. I love these trucks but I'm afraid I couldn't dedicate myself long enough to be able to do that. Really nice work! __________________ Ugly or not it still kicks a**!

11-02-2009, 06:09 PM	#5
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 2003ish roof on a C10 at SEMA Great job on that truck for sure!!! Well here is a pict of my 90 454SS (Is for sale) for comparison to see if it is a 88-99 cab.... Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

11-02-2009, 06:11 PM	#6
stueber68 1968 C20 Vortec Beast Join Date: Jun 2005 Location: STILLWATER,OKLAHOMA Posts: 483	Re: 2003ish roof on a C10 at SEMA I don't think it would be the whole cab ... the body lines match up to well for the top of the fender and the roll at the bottom of the door. __________________ Ugly or not it still kicks a**!

11-02-2009, 06:39 PM	#7
1lowdiesel Senior Member Join Date: Oct 2006 Location: central jersey Posts: 763	Re: 2003ish roof on a C10 at SEMA wow very sick imo. aaron can do amazing things with metal!! __________________ 69 4wd V6 20k orig miles!! 05 ccsb 2wd Diesel 500hp bagged and soon to be stock floored. 01 rcsb chevy 2wd 6bt cummins :devil:> build xtremediesel.com Last edited by 1lowdiesel; 11-02-2009 at 06:39 PM.

11-02-2009, 07:14 PM	#8
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: 2003ish roof on a C10 at SEMA they mightve used the whole cab and doors peeled it like an orange below the beltline and made the doorskins from the C10 fit dunno if its worth the difference other than it shows of there workmanship the roof seems higher than the original ...... next project topchop? __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

11-02-2009, 07:19 PM	#9
independentcustoms Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 133	Re: 2003ish roof on a C10 at SEMA Aaron is the absolute man when it comes to fab work.

11-02-2009, 08:15 PM	#10
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: 2003ish roof on a C10 at SEMA I like the fact of getting rid of the front windshield gasket. That is one thing I hate about our trucks. I like the flush look a lot better. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

11-02-2009, 10:49 PM	#11
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: 2003ish roof on a C10 at SEMA yea is does look to be a 88-98 cab. here is a pic i found on chassis by aarons website showing the cab to be grafted on 67-72 cab. Attached Images __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

11-02-2009, 10:57 PM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 2003ish roof on a C10 at SEMA That`s some real talent and alot o work.Just can`t beat what the General done,though.What impresses me is when someone takes something ugly and makes it look good. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 11-03-2009 at 07:51 AM.

11-02-2009, 10:57 PM	#13
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,178	Re: 2003ish roof on a C10 at SEMA wow...thats looks like a ton of work. i like the original roof better, but its some nice work __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

11-02-2009, 11:40 PM	#14
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,056	Re: 2003ish roof on a C10 at SEMA I think this is the suspension on this truck. Attached Images __________________ 74 swb 71 2wd Jimmy 82 2wd Blazer

11-02-2009, 11:45 PM	#15
mjensen Registered User Join Date: Jun 2006 Location: Utah Posts: 1,562	Re: 2003ish roof on a C10 at SEMA I have to agree with some posts above. Excellent workmanship, but I'm not a big fan of that look. __________________ Mike '69 GMC 3/4 ton 4x4 Build Thread

11-03-2009, 12:19 AM	#16
QKENUF4U Senior Member Join Date: Jan 2005 Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA Posts: 2,097	Re: 2003ish roof on a C10 at SEMA talking about going the hard way round to get one piece windows.....



Register or Log In To remove these advertisements.

11-03-2009, 12:42 AM	#17
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: 2003ish roof on a C10 at SEMA Wow, that's impressive. The grill looks sweet. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

11-03-2009, 02:33 AM	#18
nastyc10 Registered User Join Date: Aug 2009 Location: Austin, Tx Posts: 516	Re: 2003ish roof on a C10 at SEMA That chassis is sick!

11-03-2009, 05:18 AM	#19
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: 2003ish roof on a C10 at SEMA Wow that truck looks great id love to have it as is __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

11-03-2009, 03:08 PM	#21
nvrsatisfied Registered User Join Date: Oct 2007 Location: oklahoma Posts: 457	Re: 2003ish roof on a C10 at SEMA crap again......i posted pics of it also, i think it looks good they did a great job, better than putting the newer beds on these models (jmo)....... __________________ Lug Nuts Classic Rides. (Bodywork, small fab, and Restorations) Perry, Ok. We're just two guys, trying our best. 72 cheyenne super https://67-72chevytrucks.com/vboard/...d.php?t=811512 55 chevy truck http://67-72chevytrucks.com/vboard/s...d.php?t=840174

11-03-2009, 03:20 PM	#22
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 2003ish roof on a C10 at SEMA Awesome craftsmanship... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

11-03-2009, 05:02 PM	#23
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: 2003ish roof on a C10 at SEMA Only thing I'd change is a 2" chop to bring the green house down some. Always found them to be HUGE on the 88-98 trucks, but otherwise I like the look this truck has. Even the grille is a nice bit of work.

11-03-2009, 05:33 PM	#24
BADPURPLE70CHEVY 406 Powered Join Date: Aug 2009 Location: waynesville,n.c. Posts: 877	Re: 2003ish roof on a C10 at SEMA Have to say thats not my cup of tea but its a super nice truck. To have talent to do that kinda fab work is a blessing in its self. Not everyone can do that. __________________ 70 GMC 68 c10 2002 silverado 72 4x4

11-03-2009, 05:44 PM	#25
maddog1331 Registered User Join Date: Feb 2009 Location: Somerset, KY Posts: 398	Re: 2003ish roof on a C10 at SEMA Amazing craftsmanship, but personally I think it looks horrible. When I first saw it I thought it was an S-10 with the front clip from a 68. Now, that being said, it is am amazing piece of work....just personally dont like how it looks.

Register or Log In To remove these advertisements.