NJ C-10 2.5" Drop Spindles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Wild83C10 · 11-22-2009, 08:14 PM

I am selling a set of used Western Chassis 2.5" drop spindles for 1.25" rotors. Let me know if you have any questions.

If you are insterested please post in this thread first before PMing me. Thanks

$180 shipped

northern 85 · 11-22-2009, 10:56 PM

Interested, any issues running these?Thanks

northern 85 · 11-22-2009, 11:05 PM

Did you run these on your truck? Any issues with rims hitting?Thanks

joe1982 · 11-23-2009, 03:37 AM

i have an 82 short bed, will they fit??

Wild83C10 · 11-23-2009, 07:08 AM

Northern 85/Joe1982,
They will work on '73-87 1/2 tons with the 1-1/4" HD brakes. As far as rims they are supposed to fit the stock 15" rims. I had a set of 15" Torq Thrust rims when I was running these.

**nlped** · 11-23-2009, 10:08 AM

Will they work on my '76 2wd Blazer?

Wild83C10 · 11-23-2009, 11:00 AM

Quote:

Originally Posted by nlped

Will they work on my '76 2wd Blazer?

As long as you have the HD brakes they will work. You will need to measure the thickness of the rotor. If it is 1-1/4" thick they will work.

northern 85 · 11-23-2009, 05:28 PM

I will take them, you can pm me with the payment info.

Wild83C10 · 11-23-2009, 09:54 PM

Sold!

bigblock73 · 11-23-2009, 10:17 PM

I know they are sold, but those of you wondering if they will fit...the best way to find out is to get off the computer and measure your rotors! The seller provided the correct info, it's up to you to determine the rest.

Generally, 73-80 has 1.25" rotors, 81+ had 1"...but always measure to be safe.

bagged74 · 11-27-2009, 12:37 PM

Quote:

Originally Posted by bigblock73

I know they are sold, but those of you wondering if they will fit...the best way to find out is to get off the computer and measure your rotors! The seller provided the correct info, it's up to you to determine the rest.

Generally, 73-80 has 1.25" rotors, 81+ had 1"...but always measure to be safe.

im pretty sure all suburbans and blazers have the 1.25" rotors as well

**lolife99** · 11-27-2009, 01:14 PM

Jeff is correct. Measure them for yourself.
I have two 1/2 ton swb frames. Ones an '83 with 1" rotors.
The other is an '86 with 1.25" rotors.
No real way to know for sure what GM did back then, without a tape measure.

11-22-2009, 08:14 PM	#1
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	C-10 2.5" Drop Spindles I am selling a set of used Western Chassis 2.5" drop spindles for 1.25" rotors. Let me know if you have any questions. If you are insterested please post in this thread first before PMing me. Thanks $180 shipped __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time

11-22-2009, 10:56 PM	#2
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: C-10 2.5" Drop Spindles Interested, any issues running these?Thanks

11-22-2009, 11:05 PM	#3
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: C-10 2.5" Drop Spindles Did you run these on your truck? Any issues with rims hitting?Thanks

11-23-2009, 03:37 AM	#4
joe1982 .. !WAR FEDOR! .. Join Date: Mar 2009 Location: Oceanside Ca Posts: 546	Re: C-10 2.5" Drop Spindles i have an 82 short bed, will they fit?? __________________ "san diego chargers #1"

11-23-2009, 07:08 AM	#5
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: C-10 2.5" Drop Spindles Northern 85/Joe1982, They will work on '73-87 1/2 tons with the 1-1/4" HD brakes. As far as rims they are supposed to fit the stock 15" rims. I had a set of 15" Torq Thrust rims when I was running these. __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time

11-23-2009, 10:08 AM	#6
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: C-10 2.5" Drop Spindles Will they work on my '76 2wd Blazer? __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

11-23-2009, 05:28 PM	#8
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: C-10 2.5" Drop Spindles I will take them, you can pm me with the payment info.

11-23-2009, 09:54 PM	#9
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: C-10 2.5" Drop Spindles Sold! __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time

11-23-2009, 10:17 PM	#10
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: C-10 2.5" Drop Spindles I know they are sold, but those of you wondering if they will fit...the best way to find out is to get off the computer and measure your rotors! The seller provided the correct info, it's up to you to determine the rest. Generally, 73-80 has 1.25" rotors, 81+ had 1"...but always measure to be safe. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

11-27-2009, 01:14 PM	#12
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,702	Re: C-10 2.5" Drop Spindles Jeff is correct. Measure them for yourself. I have two 1/2 ton swb frames. Ones an '83 with 1" rotors. The other is an '86 with 1.25" rotors. No real way to know for sure what GM did back then, without a tape measure. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 11-27-2009 at 01:14 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.