AZ AZ parts for sale/Trade - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hotrodhenryj · 11-23-2009, 11:46 AM

I have pretty much got out of the truck thing but I do have lots of stuff here that needs to go. All parts plus shipping. I do have some great deals and some free stuff for locals.Thanks Chuck

67-8 front grill assembly, nice no rust 125
67-8 rust free radiator support 80.
67-8 aftermarket left front fender 75
69-72 rust free radiator support 60
front bed panel wood bed nice no rust 40
Drivers side step fender with spare cut out rust free, rolled bottom lip 50
Complete front crossmember with disc and PS 50
71 BB motor stands 75
Rodchester carbs 35 ea
6 hole 15X10 whit spoke Blazer wheels need blasted and painted 50
Edelbrock intakes big and small, Holley carbs...Lots will price on request

FREE PARTS

Two front fenders needing work
Two rear window glass with trim
Pair of door glass
Cowl panels
Air cleaners

Any locals can dig through my storage shed, has lots of small stuff, some free some not.

I also have a couple of 5HP dual pump air compressers as well as some electric 1.5HP replacement compressor motors, lots of hand tools, big battery charger and power washer. I will sell this stuff to locals, or trade for something I can use.......

VA72C10 · 11-23-2009, 11:48 AM

Interested in Rad support, left front fender with shipping to 23112

Thanks~!

Hotrodhenryj · 11-23-2009, 11:51 AM

Here are a few pictures

Hotrodhenryj · 11-23-2009, 11:57 AM

more

Hotrodhenryj · 11-23-2009, 12:01 PM

Air compressors

Also for locals I have a rust free CAMARO 67-73 radiator support for 75, some outer and inner fender, inners are clean outers have small rust spots, 25ea piece....

Hotrodhenryj · 11-23-2009, 12:24 PM

Quote:

Originally Posted by VA72C10

Interested in Rad support, left front fender with shipping to 23112

Thanks~!

Pics of radiator support, on closer inspection someone made extra holes by headlighs for some reason, will need repaired or run as is....I made a mistake on fender is for pass side..

Hotrodhenryj · 11-23-2009, 12:28 PM

Auto crossmembers 40ea
Radiators 40ea local pickup only

VA72C10 · 11-23-2009, 12:58 PM

I'll pass on the radiator but can you still get a shipped price for the fender to 23112? Thanks!

gcburdic · 11-23-2009, 01:20 PM

which rad support was that pictures of...the 67-68 or 69/72??.....I'm interested in the 69/72 one pending more pics and shipping to 28031?

Hotrodhenryj · 11-23-2009, 04:40 PM

Quote:

Originally Posted by VA72C10

I'll pass on the radiator but can you still get a shipped price for the fender to 23112? Thanks!

The fender will ship at oversized, so you pay almost double, 48 bucks to ship...

Hotrodhenryj · 11-23-2009, 05:00 PM

Quote:

Originally Posted by gcburdic

which rad support was that pictures of...the 67-68 or 69/72??.....I'm interested in the 69/72 one pending more pics and shipping to 28031?

Those were of the 67-8

Here is a few pic of the better of the two 69-72 supports
One riv nut has been torn out, and there is pitting on pass side, shows in pic...

Supports are also oversized and weigh 45lbs. That means it ships at 90lbs, shipping 55 bucks

Hotrodhenryj · 11-23-2009, 05:03 PM

more

VA72C10 · 11-23-2009, 05:31 PM

i figured shipping might kill the deal. Gonna have to order it with a bunch of other parts to make it worth while. Thanks for checking and a bump for excellent prices!

67 chevy heaven · 11-23-2009, 09:36 PM

what is the story on the front grille?
Is the grille trim rings dented, worped, or heavly ruxted on the back?
Shipping to 29745

67 chevy heaven · 11-23-2009, 09:37 PM

Also I wanted to ask if you had a good battery tray with brackets?
Just thought that I would ask.

Hotrodhenryj · 11-24-2009, 01:27 PM

Quote:

Originally Posted by 67 chevy heaven

what is the story on the front grille?
Is the grille trim rings dented, worped, or heavly ruxted on the back?
Shipping to 29745

The story on the front grill, is the trim rings are dented, on one end, and I don't see any rust on the back. It is a rust free unit, needing some work. Not show by any means, but driver quility.. Pics attached

**1971 GMC SHORTY** · 11-24-2009, 01:49 PM

how much to ship fenders to 91340 thanks

**thelonerife** · 11-24-2009, 02:02 PM

Are you selling those slotted rims on the truck in pic? 5 lug?

Hotrodhenryj · 11-24-2009, 07:32 PM

Quote:

Originally Posted by 1971 GMC SHORTY

how much to ship fenders to 91340 thanks

35 shipping to Cali, on the black pass fender, free fenders are for local pickup only.

Hotrodhenryj · 11-24-2009, 07:53 PM

Quote:

Originally Posted by thelonerife

Are you selling those slotted rims on the truck in pic? 5 lug?

I need those to hold up that truck LOL, your about the 5th person to ask. Would sell them with the truck though...

utvaquero59 · 11-24-2009, 08:33 PM

I need a radiator for my '71 1/2 ton w/350 and auto trans. You didn't pressure test these by chance? My piece of crap radiator leaks pretty good and I don't really want to have a repeat.

Any chance you'd want to meet in Vegas?

gcburdic · 11-25-2009, 09:35 AM

Henry,

thanks for the info....I'm gonna pass, but a bump for some really good deals

Hotrodhenryj · 11-25-2009, 10:20 AM

Quote:

Originally Posted by 67 chevy heaven

Also I wanted to ask if you had a good battery tray with brackets?
Just thought that I would ask.

I have an AC battery tray for 40 shipped

Hotrodhenryj · 11-25-2009, 10:22 AM

Quote:

Originally Posted by utvaquero59

I need a radiator for my '71 1/2 ton w/350 and auto trans. You didn't pressure test these by chance? My piece of crap radiator leaks pretty good and I don't really want to have a repeat.

Any chance you'd want to meet in Vegas?

No plans to go to Vegas, but if you make the trip here will give you one for free! You might go home with some other stuff as well. Thanks Chuck

*sharpie1972* · 11-25-2009, 10:31 AM

I'll take the BB stands if they are not spoken for. Thanks, Sharpie

11-23-2009, 11:46 AM	#1
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	AZ parts for sale/Trade I have pretty much got out of the truck thing but I do have lots of stuff here that needs to go. All parts plus shipping. I do have some great deals and some free stuff for locals.Thanks Chuck 67-8 front grill assembly, nice no rust 125 67-8 rust free radiator support 80. 67-8 aftermarket left front fender 75 69-72 rust free radiator support 60 front bed panel wood bed nice no rust 40 Drivers side step fender with spare cut out rust free, rolled bottom lip 50 Complete front crossmember with disc and PS 50 71 BB motor stands 75 Rodchester carbs 35 ea 6 hole 15X10 whit spoke Blazer wheels need blasted and painted 50 Edelbrock intakes big and small, Holley carbs...Lots will price on request FREE PARTS Two front fenders needing work Two rear window glass with trim Pair of door glass Cowl panels Air cleaners Any locals can dig through my storage shed, has lots of small stuff, some free some not. I also have a couple of 5HP dual pump air compressers as well as some electric 1.5HP replacement compressor motors, lots of hand tools, big battery charger and power washer. I will sell this stuff to locals, or trade for something I can use....... __________________ Arizona rust free sheetmetal

11-23-2009, 11:48 AM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: AZ parts for sale/Trade Interested in Rad support, left front fender with shipping to 23112 Thanks~! __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 11-23-2009 at 11:49 AM.

11-23-2009, 11:51 AM	#3
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Re: AZ parts for sale/Trade Here are a few pictures Attached Images __________________ Arizona rust free sheetmetal

11-23-2009, 11:57 AM	#4
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Re: AZ parts for sale/Trade more Attached Images __________________ Arizona rust free sheetmetal

11-23-2009, 12:01 PM	#5
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Re: AZ parts for sale/Trade Air compressors Also for locals I have a rust free CAMARO 67-73 radiator support for 75, some outer and inner fender, inners are clean outers have small rust spots, 25ea piece.... Attached Images __________________ Arizona rust free sheetmetal Last edited by Hotrodhenryj; 11-23-2009 at 12:11 PM.

11-23-2009, 12:28 PM	#7
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Re: AZ parts for sale/Trade Auto crossmembers 40ea Radiators 40ea local pickup only Attached Images __________________ Arizona rust free sheetmetal

11-23-2009, 12:58 PM	#8
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: AZ parts for sale/Trade I'll pass on the radiator but can you still get a shipped price for the fender to 23112? Thanks! __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-23-2009, 01:20 PM	#9
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: AZ parts for sale/Trade which rad support was that pictures of...the 67-68 or 69/72??.....I'm interested in the 69/72 one pending more pics and shipping to 28031? __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

11-23-2009, 05:03 PM	#12
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Re: AZ parts for sale/Trade more Attached Images __________________ Arizona rust free sheetmetal

11-23-2009, 05:31 PM	#13
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: AZ parts for sale/Trade i figured shipping might kill the deal. Gonna have to order it with a bunch of other parts to make it worth while. Thanks for checking and a bump for excellent prices! __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-23-2009, 09:36 PM	#14
67 chevy heaven Registered User Join Date: Jul 2009 Location: york, SC Posts: 223	Re: AZ parts for sale/Trade what is the story on the front grille? Is the grille trim rings dented, worped, or heavly ruxted on the back? Shipping to 29745

11-23-2009, 09:37 PM	#15
67 chevy heaven Registered User Join Date: Jul 2009 Location: york, SC Posts: 223	Re: AZ parts for sale/Trade Also I wanted to ask if you had a good battery tray with brackets? Just thought that I would ask.

11-24-2009, 01:49 PM	#17
1971 GMC SHORTY Senior Member Join Date: Apr 2009 Location: SAN FERNANDO VALLE SOL CAL Posts: 1,064	Re: AZ parts for sale/Trade how much to ship fenders to 91340 thanks

11-24-2009, 02:02 PM	#18
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: AZ parts for sale/Trade Are you selling those slotted rims on the truck in pic? 5 lug? __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

11-24-2009, 08:33 PM	#21
utvaquero59 Registered User Join Date: Aug 2007 Location: St. George, UT Posts: 70	Re: AZ parts for sale/Trade I need a radiator for my '71 1/2 ton w/350 and auto trans. You didn't pressure test these by chance? My piece of crap radiator leaks pretty good and I don't really want to have a repeat. Any chance you'd want to meet in Vegas? __________________ 1971 Cheyenne LWB TBI 350/700-R4 - Donated by a '92 Caprice cop car B&M Unimatic floor shifter Rhino Lined bed Coming soon: Blazer fuel tank!



Register or Log In To remove these advertisements.

11-25-2009, 09:35 AM	#22
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: AZ parts for sale/Trade Henry, thanks for the info....I'm gonna pass, but a bump for some really good deals __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

11-25-2009, 10:31 AM	#25
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: AZ parts for sale/Trade I'll take the BB stands if they are not spoken for. Thanks, Sharpie

Register or Log In To remove these advertisements.