Anybody seen this emblem before??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rico7769 · 11-23-2009, 10:12 PM

Guys and gurus,
When I bought our 67/68 gmc fleetside, I knew it had been put together with available parts. Front end from a 67, and the rear from a 68 by my best guess. I have fender emblems seen in the pic and cannot seem to find them on anyone else's trucks. Can't find them in any catalogs and I've looked for about a year. Websites, too! Anyone seen this emblem before?

CG · 11-23-2009, 10:14 PM

I had a couple of those I pulled off a GMC. One of em broke when I took it off. I gave the other one to a board member that collects them. Ive seen a fair number of em on board members trucks.

Andy4639 · 11-23-2009, 10:17 PM

Those were GMC truck grille peices aren't they? Just for that year I think. I maybe wrong and I'm sure someone will point that out if I am!!

Dingfodgy · 11-23-2009, 10:21 PM

Yup...them be '67-'68 GMC badges. Came on the.......wait for it........."Custom" trimmed models. IIRC this was the equivalent to the Chevy "CST" package.

**too much stuff** · 11-23-2009, 10:33 PM

67 gmc fender.

tcb-1 · 11-23-2009, 10:54 PM

isn't that the same "design" for the 67 (non CST) Custom Camper badge?

**too much stuff** · 11-23-2009, 11:03 PM

Quote:

Originally Posted by tcb-1

isn't that the same "design" for the 67 (non CST) Custom Camper badge?

Not familiar with which you speak of?

tcb-1 · 11-23-2009, 11:35 PM

lemme see if I can find an example. hope I'm not smoking bad crack again

rico7769 · 11-23-2009, 11:40 PM

FYI, both located on pass and driver side fenders close to the doors bout half way down the panel. I want to have them rechromed b/c I can't find replacement ones anywhere. To the reply about breaking one off, they attach from the back of the fender with a 3/8 nut against two threaded studs. Have to remove the fender or at least unbolt the bottom cab mounting bolt for the fender to pull away far enough to get to the nuts.

Keep the info coming. I'm interested in the history. By the way, it is a CST pkg model based on the build sticker in the glove box.

tcb-1 · 11-23-2009, 11:51 PM

sorry, I was mistaken. that emblem design only says "Custom".

I thought the "Custom Camper" had that design too, but Nooooooo. me sorry!

my thought came from the beautiful yellow truck halfway down this page:

http://www.67-72chevytrucks.com/vboa...+camper+emblem

I have never seen that emblem repopped. probably will have to rechrome and restored yours. since you have originals, I'd rechrome them because they are "probably" heavier and a better candidate for rechroming.

**special-K** · 11-24-2009, 08:54 AM

These are `67-only to-of-the-line GMC fender badges.They are not reproduced.The "Custom" script is the same script as used in the 66-68 Custom Camper fender badges ans the Custom (GMC)/Custom Camper (Chevy & GMC) door scripts.The fenders these came mounted on are unique to all the other fenders.Not only are they the `67-only fenders,but the badge holes are not the same as any other due to the verticle design of the badge.

rico7769 · 11-25-2009, 12:40 AM

thanks for the history and info. Glad we decided to keep them and keep the originality...or what's left of it..to the truck. Its great having knowledgable board members like you all!

vectorit · 11-25-2009, 12:47 AM

Here are a couple a 67 GMC's with your emblem you asked about.

11-23-2009, 10:12 PM	#1
rico7769 Hybrid67 Join Date: Jan 2009 Location: Martinez, GA Posts: 195	Anybody seen this emblem before??? Guys and gurus, When I bought our 67/68 gmc fleetside, I knew it had been put together with available parts. Front end from a 67, and the rear from a 68 by my best guess. I have fender emblems seen in the pic and cannot seem to find them on anyone else's trucks. Can't find them in any catalogs and I've looked for about a year. Websites, too! Anyone seen this emblem before? Attached Images __________________ Keep em' Running! All show.....no go

11-23-2009, 10:14 PM	#2
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,035	Re: Anybody seen this emblem before??? I had a couple of those I pulled off a GMC. One of em broke when I took it off. I gave the other one to a board member that collects them. Ive seen a fair number of em on board members trucks.

11-23-2009, 10:17 PM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Anybody seen this emblem before??? Those were GMC truck grille peices aren't they? Just for that year I think. I maybe wrong and I'm sure someone will point that out if I am!! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

11-23-2009, 10:21 PM	#4
Dingfodgy Lemme show you something!! Join Date: Apr 2007 Location: St.Helens, OR. Posts: 876	Re: Anybody seen this emblem before??? Yup...them be '67-'68 GMC badges. Came on the.......wait for it........."Custom" trimmed models. IIRC this was the equivalent to the Chevy "CST" package. __________________ '67 CST-10 LWB ("Crusty") SOLD '67 GMC SWB ("Murdock") 2000 K1500 Suburban ("Betty") '95 BMW 325i ("Joy")

11-23-2009, 10:33 PM	#5
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Anybody seen this emblem before??? 67 gmc fender. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-23-2009, 10:54 PM	#6
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Anybody seen this emblem before??? isn't that the same "design" for the 67 (non CST) Custom Camper badge? __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson Last edited by tcb-1; 11-23-2009 at 10:55 PM.

11-23-2009, 11:35 PM	#8
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Anybody seen this emblem before??? lemme see if I can find an example. hope I'm not smoking bad crack again __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

11-23-2009, 11:40 PM	#9
rico7769 Hybrid67 Join Date: Jan 2009 Location: Martinez, GA Posts: 195	Re: Anybody seen this emblem before??? FYI, both located on pass and driver side fenders close to the doors bout half way down the panel. I want to have them rechromed b/c I can't find replacement ones anywhere. To the reply about breaking one off, they attach from the back of the fender with a 3/8 nut against two threaded studs. Have to remove the fender or at least unbolt the bottom cab mounting bolt for the fender to pull away far enough to get to the nuts. Keep the info coming. I'm interested in the history. By the way, it is a CST pkg model based on the build sticker in the glove box. __________________ Keep em' Running! All show.....no go

11-23-2009, 11:51 PM	#10
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Anybody seen this emblem before??? sorry, I was mistaken. that emblem design only says "Custom". I thought the "Custom Camper" had that design too, but Nooooooo. me sorry! my thought came from the beautiful yellow truck halfway down this page: http://www.67-72chevytrucks.com/vboa...+camper+emblem I have never seen that emblem repopped. probably will have to rechrome and restored yours. since you have originals, I'd rechrome them because they are "probably" heavier and a better candidate for rechroming. __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

11-24-2009, 08:54 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Anybody seen this emblem before??? These are `67-only to-of-the-line GMC fender badges.They are not reproduced.The "Custom" script is the same script as used in the 66-68 Custom Camper fender badges ans the Custom (GMC)/Custom Camper (Chevy & GMC) door scripts.The fenders these came mounted on are unique to all the other fenders.Not only are they the `67-only fenders,but the badge holes are not the same as any other due to the verticle design of the badge. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-25-2009, 12:40 AM	#12
rico7769 Hybrid67 Join Date: Jan 2009 Location: Martinez, GA Posts: 195	Re: Anybody seen this emblem before??? thanks for the history and info. Glad we decided to keep them and keep the originality...or what's left of it..to the truck. Its great having knowledgable board members like you all! __________________ Keep em' Running! All show.....no go

11-25-2009, 12:47 AM	#13
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: Anybody seen this emblem before??? Here are a couple a 67 GMC's with your emblem you asked about. Attached Images __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.