A-arm shaft bushings - The 1947 - Present Chevrolet & GMC Truck Message Board Network

johntom · 12-03-2009, 07:43 PM

Does anyone know where I can buy JUST the bushings alone for the upper and lower shafts?
I got some from LMC, but the weren't even close to being correct.

cdowns · 12-03-2009, 07:50 PM

local autoparts store

johntom · 12-03-2009, 10:02 PM

I have tried. a bunch of places say they can only sell the complete shaft kit. I think I'm going to have to go that route, it cost's so much though....

**leddzepp** · 12-04-2009, 02:55 AM

The truck shop in orange sells the bushings alone...but the cost is almost the same as the complete shaft kit.

unclewatts · 12-04-2009, 05:11 AM

Did you try NAPA?

dznucks · 12-04-2009, 07:44 AM

what year truck?

the later year models have a press in bushing. the earlier year trucks have a screw in type "bushing".

johntom · 12-04-2009, 04:22 PM

It's a 71.
I ended up having to get the whole kit so I can get my truck back on the road.
The guy at the parts store gave me a discount though so it ended up being around $130 instead of $160.
And right on for the guy at the store to care about his job.

57larry · 12-04-2009, 07:08 PM

Quote:

Originally Posted by dznucks

what year truck?

the later year models have a press in bushing. the earlier year trucks have a screw in type "bushing".

what years have the screw in and the press in?

12-03-2009, 07:43 PM	#1
johntom Registered User Join Date: Nov 2009 Location: San Jose California Posts: 19	A-arm shaft bushings Does anyone know where I can buy JUST the bushings alone for the upper and lower shafts? I got some from LMC, but the weren't even close to being correct.

12-03-2009, 07:50 PM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: A-arm shaft bushings local autoparts store __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

12-03-2009, 10:02 PM	#3
johntom Registered User Join Date: Nov 2009 Location: San Jose California Posts: 19	Re: A-arm shaft bushings I have tried. a bunch of places say they can only sell the complete shaft kit. I think I'm going to have to go that route, it cost's so much though....

12-04-2009, 02:55 AM	#4
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: A-arm shaft bushings The truck shop in orange sells the bushings alone...but the cost is almost the same as the complete shaft kit. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

12-04-2009, 05:11 AM	#5
unclewatts 70 Chevrolet=Obsession Join Date: Jun 2009 Location: nice ca Posts: 1,067	Re: A-arm shaft bushings Did you try NAPA? __________________ I'm Just like my truck. Old, Ugly and Grouchy. Except my truck starts easily in the morning and doesn't smoke! IT'S NOT EASY BEING GREEN! -Kermit the frog 1970 Chevrolet C-10 Longbed Stepside : 350, Muncie M20, 3.08 GM corp. positraction Forest green exterior/light green interior(Where all my money goes) 1996 Toyota Corolla (Parts runner)

12-04-2009, 07:44 AM	#6
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	Re: A-arm shaft bushings what year truck? the later year models have a press in bushing. the earlier year trucks have a screw in type "bushing".

12-04-2009, 04:22 PM	#7
johntom Registered User Join Date: Nov 2009 Location: San Jose California Posts: 19	Re: A-arm shaft bushings It's a 71. I ended up having to get the whole kit so I can get my truck back on the road. The guy at the parts store gave me a discount though so it ended up being around $130 instead of $160. And right on for the guy at the store to care about his job.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.