Its on its way!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jrsmith_2010 · 12-12-2009, 06:56 PM

My truck just left here via a trailer and will hopefully be getting bagged this week. I cant wait to get it laying on the ground!! Ill post pics when i get them!

*Stitch* · 12-12-2009, 09:19 PM

awesome man...you know we definitely want to see some pics when you get them...

ShowSS12 · 12-13-2009, 01:18 AM

Who is bagging it?

jrsmith_2010 · 12-13-2009, 02:11 AM

thanks guys! ill get pics asap. the local body guy is doing for me hopefully on wensaday

spr85gmc · 12-13-2009, 05:03 PM

Quote:

Originally Posted by jrsmith_2010

thanks guys! ill get pics asap. the local body guy is doing for me hopefully on wensaday

in 1 Day post pics

jrsmith_2010 · 01-05-2010, 07:17 PM

well guys, i just talked to him, with all the fing snow we got up here, hes just not getting to it. it should be done by the end of the week, and should bu under 1k so its all good by me! haha i cant wait to get it back! ill be sure too post pics when i get it!

JohnC · 01-05-2010, 07:30 PM

Sweet man, can't wait for pics.

jrsmith_2010 · 01-11-2010, 08:31 PM

Update!! Its done!! i went to go see it tonight and it looks amazing!! its going to cost me $850 which isnt bad IMO since he did everything, zed it 4 inches and did the rear end, im going to get it tomorrow!!! and i MIGHT have some pics if u guys want to see them

cochino12 · 01-11-2010, 08:56 PM

Quote:

Originally Posted by jrsmith_2010

Update!! Its done!! i went to go see it tonight and it looks amazing!! its going to cost me $850 which isnt bad IMO since he did everything, zed it 4 inches and did the rear end, im going to get it tomorrow!!! and i MIGHT have some pics if u guys want to see them

$850? sounds like a pretty good deal, who did the work? Lets see the pics

jrsmith_2010 · 01-11-2010, 11:45 PM

our local welder does this stuff on the side, been taking my stuff to him for years now, heres some pics!!

heres the front 4inch z

and heres the rear, it looks badass!!

Driveway Dreams · 01-11-2010, 11:51 PM

Cool for you. I know you have wanted to bag that thing for a while. That Z scares me. It really looks like it needs some boxing, gusseting, something to strengthen that. But cool for you. And good deal too.

*Stitch* · 01-11-2010, 11:58 PM

x2...that Z needs to be gusseted and boxed big time...

jrsmith_2010 · 01-11-2010, 11:59 PM

thanks dude, it got plenty of bracing, the pics dont show it very well tho, its got 1/4 plates on both sides

jrsmith_2010 · 01-12-2010, 12:00 AM

its outside the frame rails, the inside dont have it, but the out side has plenty

*Stitch* · 01-12-2010, 12:01 AM

it still needs to be gusseted and boxed on the inside...

AceX · 01-12-2010, 03:06 AM

and they need to add some angular braces top and bottom so it isn't a 90* break.

Geometry > brute force

BLE 'BURBAN · 01-12-2010, 04:33 AM

Quote:

Originally Posted by AceX

and they need to add some angular braces top and bottom so it isn't a 90* break.

Geometry > brute force

X2 the rear looks great but I'd still take a piece of plate steel and box in the inside of the front of it at all 4 cuts.

78-5.3 · 01-12-2010, 08:07 AM

yeah nice work but the front is scary does need angle plates at the least!

jrsmith_2010 · 01-13-2010, 10:19 PM

Finally got home today to find that when its layed out the back dont lay frame, but its not that big of deal, ill figure out how it will lay the bedsides on the ground if i have to make the bottoms longer by cutting and welding in more pieces. it lays frame under the cab completly, but the cab isnt on the ground...yet. im taking the biscuits out from the cab mounts so it will, i took the back 2 out tonight and it lowered it 2 or so inches and it will lay just fine. ill try to put the front clip on it tomorrow after i get out of school, and see how it lays, i figure ill have to do the same with that as i will with the bed. heres some pics when i got to workin on it today!

LAYIN FRAME!

heres the rear, the bags r mounted on the wishbone so its restricting the drop

how low it was before i got my hands on it, it barly wouldnt let me but my boot under it, now i can barly get a pen under it

took of the heater box cuz it was hitting and i dont need it, might be worth some money on CL

took these out of the rear of the cab, still need to get the other 2 in front of it

thats all for today guys, ill get back on it tomorrow after i get home, the damn snow really puts a damper on what one can do in wet ground

texasfunk · 01-13-2010, 10:28 PM

is it a long bed? looks good!

jrsmith_2010 · 01-13-2010, 10:32 PM

yes sir it is, i thought id do a longbed since u hardly see them on the ground

texasfunk · 01-13-2010, 10:39 PM

yea, i like the way long beds look! personally i like the look of the 73-79 front end on a longbed better, but i think this thing will look sick with big wheels!

3r!c84 · 01-13-2010, 10:40 PM

not going to lay frame?

glock35ipsc · 01-13-2010, 10:41 PM

The rear looks great. The front isn't anywhere close to being finished. I wouldn't let my worst enemy drive it like that. PLEASE have it finished..... boxed and angular gusseting top and bottom. If your welder friend wants to argue that it is safe, it's time to find a new welder friend.

*Stitch* · 01-13-2010, 10:42 PM

you took the body mounts out....wow...

and I've already voiced my thoughts on the front end...also, on the rear, if he had done it BOA it would lay frame in the rear...just a thought

12-12-2009, 06:56 PM	#1
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Its on its way!! My truck just left here via a trailer and will hopefully be getting bagged this week. I cant wait to get it laying on the ground!! Ill post pics when i get them! __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.

12-12-2009, 09:19 PM	#2
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Its on its way!! awesome man...you know we definitely want to see some pics when you get them...

12-13-2009, 01:18 AM	#3
ShowSS12 Registered User Join Date: Apr 2008 Location: Sugarland,Tejas Posts: 356	Re: Its on its way!! Who is bagging it? __________________ Adam M STX Designs Motorcycles \| Choppers \| Hotrods

12-13-2009, 02:11 AM	#4
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: Its on its way!! thanks guys! ill get pics asap. the local body guy is doing for me hopefully on wensaday __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.

01-05-2010, 07:17 PM	#6
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: Its on its way!! well guys, i just talked to him, with all the fing snow we got up here, hes just not getting to it. it should be done by the end of the week, and should bu under 1k so its all good by me! haha i cant wait to get it back! ill be sure too post pics when i get it! __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.

01-05-2010, 07:30 PM	#7
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: Its on its way!! Sweet man, can't wait for pics.

01-11-2010, 08:31 PM	#8
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: Its on its way!! Update!! Its done!! i went to go see it tonight and it looks amazing!! its going to cost me $850 which isnt bad IMO since he did everything, zed it 4 inches and did the rear end, im going to get it tomorrow!!! and i MIGHT have some pics if u guys want to see them __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow. Last edited by jrsmith_2010; 01-11-2010 at 08:35 PM.

01-11-2010, 11:45 PM	#10
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: Its on its way!! our local welder does this stuff on the side, been taking my stuff to him for years now, heres some pics!! heres the front 4inch z and heres the rear, it looks badass!! __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.

01-11-2010, 11:51 PM	#11
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Its on its way!! Cool for you. I know you have wanted to bag that thing for a while. That Z scares me. It really looks like it needs some boxing, gusseting, something to strengthen that. But cool for you. And good deal too. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

01-11-2010, 11:58 PM	#12
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Its on its way!! x2...that Z needs to be gusseted and boxed big time...

01-11-2010, 11:59 PM	#13
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: Its on its way!! thanks dude, it got plenty of bracing, the pics dont show it very well tho, its got 1/4 plates on both sides __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.

01-12-2010, 12:00 AM	#14
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: Its on its way!! its outside the frame rails, the inside dont have it, but the out side has plenty __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.

01-12-2010, 12:01 AM	#15
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Its on its way!! it still needs to be gusseted and boxed on the inside...

01-12-2010, 03:06 AM	#16
AceX >130dB Moderator Join Date: Aug 2006 Location: Sacramento, CA Posts: 2,130	Re: Its on its way!! and they need to add some angular braces top and bottom so it isn't a 90* break. Geometry > brute force __________________ Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

01-12-2010, 08:07 AM	#18
78-5.3 Registered User Join Date: Oct 2009 Location: Waterboro ,MAINE Posts: 547	Re: Its on its way!! yeah nice work but the front is scary does need angle plates at the least!



Register or Log In To remove these advertisements.

01-13-2010, 10:19 PM	#19
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: Its on its way!! Finally got home today to find that when its layed out the back dont lay frame, but its not that big of deal, ill figure out how it will lay the bedsides on the ground if i have to make the bottoms longer by cutting and welding in more pieces. it lays frame under the cab completly, but the cab isnt on the ground...yet. im taking the biscuits out from the cab mounts so it will, i took the back 2 out tonight and it lowered it 2 or so inches and it will lay just fine. ill try to put the front clip on it tomorrow after i get out of school, and see how it lays, i figure ill have to do the same with that as i will with the bed. heres some pics when i got to workin on it today! LAYIN FRAME! heres the rear, the bags r mounted on the wishbone so its restricting the drop how low it was before i got my hands on it, it barly wouldnt let me but my boot under it, now i can barly get a pen under it took of the heater box cuz it was hitting and i dont need it, might be worth some money on CL took these out of the rear of the cab, still need to get the other 2 in front of it thats all for today guys, ill get back on it tomorrow after i get home, the damn snow really puts a damper on what one can do in wet ground __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow. Last edited by jrsmith_2010; 01-13-2010 at 10:25 PM.

01-13-2010, 10:28 PM	#20
texasfunk Registered User Join Date: Jun 2009 Location: Lubbock, TX Posts: 1,671	Re: Its on its way!! is it a long bed? looks good! __________________ 2006 GMC Sierra CCSB, 6.0 swap 2000 Chevy C3500 Crew Cab shortbed dually 1999 Chevy c2500 Crew Cab shortbed 1982 El Camino 350/350 1979 K5 2wd blazer bagged/bodied 1986 Monte Carlo SS 1991 Chevy CK SWB-67 clip and tailgate, bagged 350/700r4 1955 Chevy Bel Air 2014 Chevy Silverado ccsb

01-13-2010, 10:32 PM	#21
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: Its on its way!! yes sir it is, i thought id do a longbed since u hardly see them on the ground __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.

01-13-2010, 10:39 PM	#22
texasfunk Registered User Join Date: Jun 2009 Location: Lubbock, TX Posts: 1,671	Re: Its on its way!! yea, i like the way long beds look! personally i like the look of the 73-79 front end on a longbed better, but i think this thing will look sick with big wheels! __________________ 2006 GMC Sierra CCSB, 6.0 swap 2000 Chevy C3500 Crew Cab shortbed dually 1999 Chevy c2500 Crew Cab shortbed 1982 El Camino 350/350 1979 K5 2wd blazer bagged/bodied 1986 Monte Carlo SS 1991 Chevy CK SWB-67 clip and tailgate, bagged 350/700r4 1955 Chevy Bel Air 2014 Chevy Silverado ccsb

01-13-2010, 10:40 PM	#23
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: Its on its way!! not going to lay frame? __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

01-13-2010, 10:41 PM	#24
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Its on its way!! The rear looks great. The front isn't anywhere close to being finished. I wouldn't let my worst enemy drive it like that. PLEASE have it finished..... boxed and angular gusseting top and bottom. If your welder friend wants to argue that it is safe, it's time to find a new welder friend. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

01-13-2010, 10:42 PM	#25
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Its on its way!! you took the body mounts out....wow... and I've already voiced my thoughts on the front end...also, on the rear, if he had done it BOA it would lay frame in the rear...just a thought Last edited by Stitch; 01-13-2010 at 10:43 PM.

Register or Log In To remove these advertisements.