Shaved my doors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ROLLIN' TOPLEZZ · 12-20-2009, 04:26 PM

I had my doors shaved now i need help with choosing the set up. What do you guys have?

thrtsxchambers · 12-20-2009, 07:14 PM

AVS has a kit on sale right now. That is the kit I have I think I got it for $150 for two door kit with everything you need, took about 1 hr to install. The kit has the dual gear actuators and seem to work good so far.

**old Rusty C10** · 12-20-2009, 08:15 PM

dont have an answer to your question i was just wondering if there was any more progress to your truck... pics etc?

cochino12 · 12-20-2009, 09:53 PM

Quote:

Originally Posted by ROLLIN' TOPLEZZ

I had my doors shaved now i need help with choosing the set up. What do you guys have?

Quote:

Originally Posted by thrtsxchambers

AVS has a kit on sale right now. That is the kit I have I think I got it for $150 for two door kit with everything you need, took about 1 hr to install. The kit has the dual gear actuators and seem to work good so far.

If you have the $$ to spend I would buy the AVS kit, seems like a very good and straight forward product. I've always just used an alarm, pulled a couple springs out of the door latch assembly, and used door lock actuators but for for only $150 why screw with it.

More progress pics of your blazer would be great

copperchevy · 12-20-2009, 10:29 PM

AVS has a bolt on kit now available for your blazer. Check out www.c10forum.com for more info.

ROLLIN' TOPLEZZ · 12-21-2009, 01:53 AM

Quote:

Originally Posted by thrtsxchambers

AVS has a kit on sale right now. That is the kit I have I think I got it for $150 for two door kit with everything you need, took about 1 hr to install. The kit has the dual gear actuators and seem to work good so far.

Do you have any pics? I was checking that kit out $170.

ROLLIN' TOPLEZZ · 12-21-2009, 01:57 AM

Quote:

Originally Posted by old Rusty C10

dont have an answer to your question i was just wondering if there was any more progress to your truck... pics etc?

The most recent pictures are on the other thread. I should get it back Tuesday to get the wiring done for the doors, alarm and maybe even the engine before i get it painted.

ROLLIN' TOPLEZZ · 12-21-2009, 02:00 AM

Quote:

Originally Posted by cochino12

If you have the $$ to spend I would buy the AVS kit, seems like a very good and straight forward product. I've always just used an alarm, pulled a couple springs out of the door latch assembly, and used door lock actuators but for for only $150 why screw with it.

More progress pics of your blazer would be great

I was thinking of something like that, i just dont want to do it twice.

*Stitch* · 12-21-2009, 02:02 AM

Quote:

Originally Posted by copperchevy

AVS has a bolt on kit now available for your blazer. Check out www.c10forum.com for more info.

do you have a link to what he was actually asking about or just a link to a homepage...

ROLLIN' TOPLEZZ · 12-21-2009, 02:02 AM

Quote:

Originally Posted by copperchevy

AVS has a bolt on kit now available for your blazer. Check out www.c10forum.com for more info.

I was looking at it earlier, but i was thinking maybe i just need the solenoids and maybe the poppers. Along with a better alarm system.

ROLLIN' TOPLEZZ · 12-21-2009, 02:13 AM

Quote:

Originally Posted by Fat Hoe

do you have a link to what he was actually asking about or just a link to a homepage...

Sorry Fat Hoe but I didn't post that link. Mine is http://67-72chevytrucks.com/vboard/s...=352323&page=4

*Stitch* · 12-21-2009, 02:16 AM

I quoted copperchevy...he didn't add any info to the post that was of any good without a proper link to what he was actually talking about...a general link to another forum is going to do you no good without a ton of searching...

copperchevy · 12-21-2009, 11:05 AM

Sorry Fat Hoe, dont know how to post exact links. Click the picture and look for the avs section. Takes 2 seconds. That bolt on kit will save u alot of headache. Im order one for a 79 k5 blazer im working on.

thrtsxchambers · 12-21-2009, 01:07 PM

Quote:

Originally Posted by ROLLIN' TOPLEZZ

Do you have any pics? I was checking that kit out $170.

No pic but the kit is still $150 on the site. I have the universal kit with 2 remotes, 2 actuators (no poppers). I think right now if you are a member of c10 forum you also get a discount but it might be for just the acuators.
http://www.avsontheweb.com/product.p...cat=138&page=1

*Stitch* · 12-21-2009, 08:27 PM

Quote:

Originally Posted by copperchevy

Sorry Fat Hoe, dont know how to post exact links. Click the picture and look for the avs section. Takes 2 seconds. That bolt on kit will save u alot of headache. Im order one for a 79 k5 blazer im working on.

sorry about that...I reread my post and I came off really crappy...didn't mean for it to come across like that...once again sorry....

Chuck.

ROLLIN' TOPLEZZ · 01-11-2010, 10:49 PM

Decided to go with the AVS kit i ordered it on Friday and got it today. Cant wait to start in stalling it. Any helpful tips?

cochino12 · 01-11-2010, 11:53 PM

Quote:

Originally Posted by ROLLIN' TOPLEZZ

Decided to go with the AVS kit i ordered it on Friday and got it today. Cant wait to start in stalling it. Any helpful tips?

Let me know how the install goes, sorry no help here

Adam

thrtsxchambers · 01-12-2010, 12:01 AM

Quote:

Originally Posted by ROLLIN' TOPLEZZ

Decided to go with the AVS kit i ordered it on Friday and got it today. Cant wait to start in stalling it. Any helpful tips?

It's a simple install. I am not sure how most people put them in but mine is hooked up to the lever that uses the inside handle and hooked another cable to the inside handle so it can still be used. If you run into any problems just post up and somebody will help ya out.

TheSunDanceKid · 01-12-2010, 03:54 PM

ive bought from this guy before its an actual shop not sure if he actually has a site you can order from but he does ship stuff and its a FULL kit for 90bucks hes in arizona ive personally been to the shop ive also bought the suicides too also a good deal and has everything to do it for 110 bucks also has full bag kits and a bunch of other stuff
i install the kit from him on an 82 c10 i believe they were 80s for the solinoids but i have used 40s on a 72 c10 and they worked fine also
ive installed a couplein c10s pm me if you need some help

http://phoenix.craigslist.org/evl/pts/1545726952.html

ROLLIN' TOPLEZZ · 01-14-2010, 02:02 AM

Thanx guys. I got the wrong poppers, so had to reorder the right ones. Does anyone still use the door lock with kit like this?

cochino12 · 01-14-2010, 02:15 AM

Quote:

Originally Posted by ROLLIN' TOPLEZZ

Thanx guys. I got the wrong poppers, so had to reorder the right ones. Does anyone still use the door lock with kit like this?

Call me, I'll help you out.

thrtsxchambers · 01-14-2010, 02:23 AM

I did not get the poppers with mine and works fine. I still have my locks for now until I shave the doors. I bought the kit before shaving.

rain_man · 01-18-2010, 10:50 PM

i saw some kits on ebay for like $100 buck with poppers. are they junk has anyone used them?

12-20-2009, 04:26 PM	#1
ROLLIN' TOPLEZZ Registered User Join Date: Jun 2009 Location: L.A. CA. Posts: 111	Shaved my doors I had my doors shaved now i need help with choosing the set up. What do you guys have?

12-20-2009, 07:14 PM	#2
thrtsxchambers Registered User Join Date: Nov 2009 Location: Salisbury, NC Posts: 316	Re: Shaved my doors AVS has a kit on sale right now. That is the kit I have I think I got it for $150 for two door kit with everything you need, took about 1 hr to install. The kit has the dual gear actuators and seem to work good so far.

12-20-2009, 08:15 PM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Shaved my doors dont have an answer to your question i was just wondering if there was any more progress to your truck... pics etc? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-20-2009, 10:29 PM	#5
copperchevy Registered User Join Date: Sep 2007 Location: Tyler, Texas Posts: 220	Re: Shaved my doors AVS has a bolt on kit now available for your blazer. Check out www.c10forum.com for more info. __________________ Mexican

12-21-2009, 02:16 AM	#12
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Shaved my doors I quoted copperchevy...he didn't add any info to the post that was of any good without a proper link to what he was actually talking about...a general link to another forum is going to do you no good without a ton of searching...

12-21-2009, 11:05 AM	#13
copperchevy Registered User Join Date: Sep 2007 Location: Tyler, Texas Posts: 220	Re: Shaved my doors Sorry Fat Hoe, dont know how to post exact links. Click the picture and look for the avs section. Takes 2 seconds. That bolt on kit will save u alot of headache. Im order one for a 79 k5 blazer im working on. __________________ Mexican Last edited by copperchevy; 12-21-2009 at 11:14 AM.

01-11-2010, 10:49 PM	#16
ROLLIN' TOPLEZZ Registered User Join Date: Jun 2009 Location: L.A. CA. Posts: 111	Re: Shaved my doors Decided to go with the AVS kit i ordered it on Friday and got it today. Cant wait to start in stalling it. Any helpful tips?

01-12-2010, 03:54 PM	#19
TheSunDanceKid Registered User Join Date: Aug 2009 Location: chandler, arizona Posts: 125	Re: Shaved my doors ive bought from this guy before its an actual shop not sure if he actually has a site you can order from but he does ship stuff and its a FULL kit for 90bucks hes in arizona ive personally been to the shop ive also bought the suicides too also a good deal and has everything to do it for 110 bucks also has full bag kits and a bunch of other stuff i install the kit from him on an 82 c10 i believe they were 80s for the solinoids but i have used 40s on a 72 c10 and they worked fine also ive installed a couplein c10s pm me if you need some help http://phoenix.craigslist.org/evl/pts/1545726952.html Last edited by TheSunDanceKid; 01-12-2010 at 03:54 PM.

01-14-2010, 02:02 AM	#20
ROLLIN' TOPLEZZ Registered User Join Date: Jun 2009 Location: L.A. CA. Posts: 111	Re: Shaved my doors Thanx guys. I got the wrong poppers, so had to reorder the right ones. Does anyone still use the door lock with kit like this?

01-14-2010, 02:23 AM	#22
thrtsxchambers Registered User Join Date: Nov 2009 Location: Salisbury, NC Posts: 316	Re: Shaved my doors I did not get the poppers with mine and works fine. I still have my locks for now until I shave the doors. I bought the kit before shaving.

01-18-2010, 10:50 PM	#23
rain_man Registered User Join Date: Dec 2009 Location: daytona beach fl Posts: 187	Re: Shaved my doors i saw some kits on ebay for like $100 buck with poppers. are they junk has anyone used them? __________________ 61 step/long bed SBW(SOLD) NEED A NEW PROJECT



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.