CA Parting out a Project 67 short fleet....

[John Fabris]

ALL HAVE BEEN SOLD, thanks!!!

NOTE these parts are for sale locally as well and I will sell to first cash.

Well, I have a 1967 short fleet body and frame that I am now going to get rid of in favor of a 1968 Panel with 396..

What I have is a project that I have been collecting parts for to do a bigblock corvette suspension short fleet.... Now parting it out to make money and room for new project...

At the risk of sounding like a jerk, please don't waste my time on asking for a part and then flaking on it. Also, parts are for sale locally and if it is not paid for here, I reserve my right to sell it elsewhere...
What I have listed here is what I have listed for sale. If it is not in my post, I do not have it...
Those whom have dealt with me know that I am a straight up guy to deal with, so don't jerk with me and I wont jerk with you.


***************************
Original 67 small window non-air cab with no rust. Has vin but no title as it has been off DMV records for over 10 years. Cab is stripped bare (no parts still has paint), comes with both rust free gutted doors. Asking for $500 for the cab. (ask for pictures have 22)
See pictures in this thread:
http://67-72chevytrucks.com/vboard/s...=1#post3697068

SOLD LOCALLY.
**************************
Shortbed Frame with no suspension. Asking for $200 (no pictures, complete body still on frame)
http://67-72chevytrucks.com/vboard/s...=1#post3697068

SOLD LOCALLY
**************************
SOLD 67 front clip (hood, core support, grill, pass fender, driver side inner fender) all rust free and minimal body work needed) 2 driver side fenders both had body damage) Asking for $450. (ask for pictures have 13)
http://67-72chevytrucks.com/vboard/s...=1#post3697068
SOLD to 19stepside72

**************************
PARTING BED OUT. Look for new sale thread... SOLD

**************************
SOLD, thanks
OPP one peice window kit (gray tint) (new, brought duing the last group buy) asking $400

Sale pending to TruckManLoco NOTE TRUCKMANLOCO HAS NOT PAID ME OR RESPONDED TO PHONE CALLS OR IM EVEN THOUGH HE HAS CHECKED THEM ACCORDING TO SITE LAST ACTIVITY TIME STAMP. SORRY TRUCKMANLOCO.

Like I said in my posting, dont jerk me around....

SALE PENDING TO 19stepside72
next in line is jmedero

**************************
84 C4 corvette complete front suspension SOLD
84 C4 corvette complete rear axle/suspension SOLD


**************************
Flat Out Engineering front crossmember (for 67-72 truck and 84 C4 front suspenion) (cost $795.99) Asking $700


**************************
SOLD Summit aluminum fuel cell 20 gallon, (used) $80.00 (10"x20"x24")
universal, you need to fab your own mounts.

SOLD
**************************
**************************
Used Cowl panels (3) $10.00 each


**************************
1 Set of rear inner fleetside fenders good shape, $40.00 for the pair


Special-K has passed on this.
Thelonerife has passed on this.

**************************

SOLD Rear roll pan kit with license plate pocket and lights. $70.00

SOLD to 19stepside72


If you are interested in these parts, please respond in this thread. I will not respond to IM on parts... Buyer to cover actuall shipping cost. I would prefer not to ship due to size of everthing..
We can talk about me delivering in California, Nevada, Oregon, but you will cover my diesel and my time....

Also, asking questions or asking for details does not mean you have spoken for that item in thread.

[thelonerife]

Is the GMC tailgate for 67-68? would you sell it seperate? condition?

[John Fabris]

tailgate is 69-72 gmc with sierra trim, prefer to sell with complete bed.

[wancosc356]

Interested in the fuel cell...pending pics and dimensions.

[truckmanloco]

Ill take the glass kit and front clip if your headed to san diego anytime soon.

[special-K]

I`m sitting here trying to think of how to get that cab cross-country or someone I know that could pick it up...argh.I for some odd reason someone doesn`t conveniently stop by and buy that cab,could it sit a while until picked up.Yes,far fetrched and I don`t want to complicate the sale.Just have to ask.It`s that truck builder in me,you understand.

[71 super]

Do you have doors with the cab? I would like to see pictures if you do and a price if you want to sell. Thanks, Harold

[19stepSide72]

I too would be interested in the front wrap. I live a few hours away between eureka and redding, if it gets to me. Windows too.

[John Fabris]

TTT for new pictures and parts added. IMs send for sale pending items.

[jmedero]

Do you still have the window kit? Also any headlight hoops and grille trim?

[dazza]

Put me in line for the fuel cell please.

[special-K]

Those wheel houses,are the flanges pretty much all there and solid?Can I get shipping quote to 21771?Pondering that cab.

[thelonerife]

I'll get in line on the wheel tubs.

[wancosc356]

Stepping out of line on the fuel cell

[dazza]

I'll have to step down on the fuel cell as well... it doesn't line up with the measurements of my wallet right now... very good price though, Thanks.

[19stepSide72]

interested in the roll pan too!!!

[John Fabris]

TTT and Happy New Year!

[special-K]

I`m getting some pretty good links in the chain for getting the cab.

[John Fabris]

TTT for one more try then rest of parts go onto craigslist...

[John Fabris]

TTT Don't miss this bed!! it is in good shape!!!! Just does not show pretty in pictures, but very little body work is needed to freshen up the bedside. Tail gate only has one dent along top trim area.

[72SWBChevy]

Originally Posted by John Fabris

TTT Don't miss this bed!! it is in good shape!!!! Just does not show pretty in pictures, but very little body work is needed to freshen up the bedside. Tail gate only has one dent along top trim area.

I need a good bed, but just to far away..lol

[special-K]

John,in all fairness,if thelonerife wants the wheelhouses let him have them.I am focused on the cab and would love to have you send the wheelhouses in there.Not that I would pay to ship them seperately.But,Chuck is ready now and,like I said,I`m more about that cab.I have a trucker near you checking with all his source to find a spot in a trailer back east.I still understand if a local sale comes along,I`d expect you to sell it.I won`t string this along much longer and will pass it along to you know who if something doesn`t happen soon.As soon as it looks worked out I`ll seal the deal.Either way I`ll be in touch.Thanks

[John Fabris]

Hi Tim, thanks for the update. I will IM thelonerife and see if he is up for the wheelwells..

[1971 GMC SHORTY]

can i get pictures of the Bed Please... Thank You

[19stepSide72]

By the way, John went out of his way to meet up with me. He also included ricks71 a/c unit on his drive. John I would like to thank you again and again for helping this fellow board member out. Rob