What did you get done 12/27/09 edition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**old Rusty C10** · 12-27-2009, 06:13 PM

We didnt do a dern thing with christmas and all, plus the wife starts her chemo tomorrow so we spent the weekend trying to rest and relax
How about you all?

Scootin 81 C20 · 12-27-2009, 06:40 PM

I got my new stereo installed. Other than that, nothing truck related. I did however have a nice Christmas with my family.

dbmx66 · 12-27-2009, 06:55 PM

got my new front tires, fuel cell,seats, and sway bar mounted.

thrtsxchambers · 12-27-2009, 07:52 PM

Watched football, worked on my daughters car stereo system(christmas present), Tested a new amp for my system and now watching football again. Also relaxing with the adult beverage.

**N2TRUX** · 12-27-2009, 07:57 PM

Saturday I took my 06 Silverado and my 09 Sierra to a shop and had them swap the lowering shackles. I had planned to do it myself until I found out what was involved in getting them on the 09.

Now they are on, and the rear of the 09 sits a little low. I hate to raise it back up a notch, but don't see getting the front down with out more trouble than I care to go through.

Today I worked on my 06 Silverado. I went to the coin car wash to pressure wash the engine and frame. I'm cleaning it up to put it on the market. Once the new windshield is in place it hits Craigslist.

Chlsnk · 12-27-2009, 08:03 PM

Installed a stearo in my truck .

mongoose · 12-27-2009, 08:14 PM

not much pulled out the front axle... and started pulling out the x-member out of the '73..

it's just really hard to get motivated when you're laying on concrete and it's below freezing... ya know?

baggedcten · 12-27-2009, 08:18 PM

Nothing much just installed the GPS i got for Christmas in my daily I tried to hide the wire without cutting the interior up!I think its cool even tho i dont travel anywhere i dont know how to get too!!

pcmcobra · 12-27-2009, 08:38 PM

I think I got that same gps for my work van...think good old Mom got it for me...Been borrowing my wifes for those back road alabammy road trips.
Saturday, I loaded up my boys raptor 80 in the back of my gmc and went to my wife's uncles place, has several acres with a nice fishing pond we frequent in spring and summer, anyway, I got past his house and almost to the pond where I was going to unload (had my boy and oldest girl with me), so much rain I got stuck in the pasture, lol. He had to get his f250 4x4 to come pull me out. I was not really embarrassed...this is the first time I have ever been stuck, just got out the chains and yanked me out, so we did not ride. Maybe next weekend we can...I need to talk my wife into letting me get a 4 wheeler. Been looking at the trx400/450r....too bad they are not free.

GmtGmt · 12-27-2009, 09:08 PM

Torn the donor cab truck apart,

painted the second Tank, almost done with the rebuild of the old wiring harnes

bought this my truck custom made for long bed squares idk make
going to be cool at shows and girls in the back

painted, tank carriers and radiator support
Last but not least had alot of beer

Restrorob · 12-27-2009, 09:19 PM

Spent the weekend on here reading......

S10Fan · 12-27-2009, 09:28 PM

Quote:

Originally Posted by old Rusty C10

the wife starts her chemo tomorrow so we spent the weekend trying to rest and relax

Prayers to your wife!

I had no idea, keep us updated!

S10Fan · 12-27-2009, 09:36 PM

Had a nice relaxing Christmas weekend, didn't really do much of anything.

I mentioned in last weeks thread that my wife and i were getting our oldest daughters car painted. I was asked to post pics, here ya go.

Note! I'm going to have my daughter make the wheel decision.

**old Rusty C10** · 12-27-2009, 10:17 PM

paint job looks real nice.. I hope she liked it and the custom work is nice too..I just hope my daughter doesnt see this thread or shes gonna want to have me do stuff like that to her car lol

ghettoluxury · 12-27-2009, 10:30 PM

Replaced a crank sensor on the Honda

Rollinsqrbdy · 12-27-2009, 11:02 PM

Well i worked on the 84 and finally got it running. Started it rite on time to catch the dallas game. GO DALLAS COWBOYS!!!
Old Rusty c10- prayers to your wife and the family.

rigon4 · 12-27-2009, 11:31 PM

Old Rusty C10 tell your wife good luck and keep fighting it will be all good in the long run as long as you keep fighting dont give up!!!

truck wise i did nothing

slugish · 12-28-2009, 12:36 AM

Quote:

Originally Posted by old rusty c10

paint job looks real nice.. I hope she liked it and the custom work is nice too..i just hope my daughter doesnt see this thread or shes gonna want to have me do stuff like that to her car lol

yes , prayers & thoughts for your wife here too bob.

AceX · 12-28-2009, 07:08 AM

During the week, I finally got the new wheels on the truck. Rest of my time has ben spent learning engineering and photoshop so I can plan out another build I'm about to start on early next year.

Here's teaser;

grinch4om · 12-28-2009, 08:38 AM

new batterey and oil change...drove it first time in over a month...man big blocks are fun

SSC's76 · 12-28-2009, 10:50 AM

I had chopped off my exh when I installed the class 5 hitch that was about 2 years ago. I finially got a chance to put it back on and route it a little better sounds much better with a full exh than having it chopped at the mufflers. Also got all the oil and filter to do and oil change on the truck and the apollo dident quite get to that yet.

Mr.Scary · 12-28-2009, 11:14 AM

i took my grill completly apart and sanded everything and primed it painted it and clear coated as well and buffed all tha chrome trim of tha grill cause it was very badley weathered and then put everything back 2 gether agian and shined up tha bumper and tha whole nose of it got a make over needless 2 say. nothin done motor wise(2 cold) LOL

f.monroe · 12-28-2009, 10:29 PM

Christmas , several get togethers with the family and extended family .
Then we spent Sat till today in west Tx deer hunting with my brother-in-law . His place is great! Now to start processing deer . Lots!
Frank

JohnC · 12-28-2009, 11:00 PM

Quote:

Originally Posted by S10Fan

Prayers to your wife!

I had no idea, keep us updated!

Quote:

Originally Posted by Rollinsqrbdy

Old Rusty c10- prayers to your wife and the family.

Quote:

Originally Posted by rigon4

Old Rusty C10 tell your wife good luck and keep fighting it will be all good in the long run as long as you keep fighting dont give up!!!

Quote:

Originally Posted by slugish

yes , prayers & thoughts for your wife here too bob.

As stated before, but never enough. Our thoughts and prayers to your wife and family.

glock35ipsc · 12-28-2009, 11:09 PM

I thought about installing the wireless remote keyless entry I got for Christmas on Fred, but decided against it. Goofed off with the kiddos instead.

12-27-2009, 06:13 PM	#1
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,277	What did you get done 12/27/09 edition We didnt do a dern thing with christmas and all, plus the wife starts her chemo tomorrow so we spent the weekend trying to rest and relax How about you all? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-27-2009, 06:40 PM	#2
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: What did you get done 12/27/09 edition I got my new stereo installed. Other than that, nothing truck related. I did however have a nice Christmas with my family. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

12-27-2009, 06:55 PM	#3
dbmx66 Registered User Join Date: Aug 2009 Location: PA Posts: 883	Re: What did you get done 12/27/09 edition got my new front tires, fuel cell,seats, and sway bar mounted.

12-27-2009, 07:52 PM	#4
thrtsxchambers Registered User Join Date: Nov 2009 Location: Salisbury, NC Posts: 316	Re: What did you get done 12/27/09 edition Watched football, worked on my daughters car stereo system(christmas present), Tested a new amp for my system and now watching football again. Also relaxing with the adult beverage.

12-27-2009, 07:57 PM	#5
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: What did you get done 12/27/09 edition Saturday I took my 06 Silverado and my 09 Sierra to a shop and had them swap the lowering shackles. I had planned to do it myself until I found out what was involved in getting them on the 09. Now they are on, and the rear of the 09 sits a little low. I hate to raise it back up a notch, but don't see getting the front down with out more trouble than I care to go through. Today I worked on my 06 Silverado. I went to the coin car wash to pressure wash the engine and frame. I'm cleaning it up to put it on the market. Once the new windshield is in place it hits Craigslist. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

12-27-2009, 08:03 PM	#6
Chlsnk Registered User Join Date: Jan 2009 Location: Kansas city Posts: 756	Re: What did you get done 12/27/09 edition Installed a stearo in my truck . __________________ *My 84 short bed build up*** http://67-72chevytrucks.com/vboard/s...68#post3481968

12-27-2009, 08:14 PM	#7
mongoose Registered User Join Date: Feb 2009 Location: slurrey, bc. Posts: 1,134	Re: What did you get done 12/27/09 edition not much pulled out the front axle... and started pulling out the x-member out of the '73.. it's just really hard to get motivated when you're laying on concrete and it's below freezing... ya know? __________________ -'73 c/10 - Low with Go - will be complete... probably never. -'90 2wd Blazer - well... soon enough anyways. -'84 SWB - the daily gas guzzler.

12-27-2009, 08:18 PM	#8
baggedcten 86 C10 Join Date: Sep 2007 Location: Ga. Posts: 416	Re: What did you get done 12/27/09 edition Nothing much just installed the GPS i got for Christmas in my daily I tried to hide the wire without cutting the interior up!I think its cool even tho i dont travel anywhere i dont know how to get too!! __________________ 1986 C10 2001 chevy silverado purchased 8-29-09 sold 2004 silverado purchased 8-27-10 sold

12-27-2009, 08:38 PM	#9
pcmcobra Registered User Join Date: Aug 2006 Location: Florida Posts: 1,684	Re: What did you get done 12/27/09 edition I think I got that same gps for my work van...think good old Mom got it for me...Been borrowing my wifes for those back road alabammy road trips. Saturday, I loaded up my boys raptor 80 in the back of my gmc and went to my wife's uncles place, has several acres with a nice fishing pond we frequent in spring and summer, anyway, I got past his house and almost to the pond where I was going to unload (had my boy and oldest girl with me), so much rain I got stuck in the pasture, lol. He had to get his f250 4x4 to come pull me out. I was not really embarrassed...this is the first time I have ever been stuck, just got out the chains and yanked me out, so we did not ride. Maybe next weekend we can...I need to talk my wife into letting me get a 4 wheeler. Been looking at the trx400/450r....too bad they are not free. __________________ 1986 C10 SWB 6.0/6l90e Miami...Flee it like a native

12-27-2009, 09:19 PM	#11
Restrorob The One And Only !!! Join Date: Jan 2007 Location: Hole in the woods Florida Posts: 4,567	Re: What did you get done 12/27/09 edition Spent the weekend on here reading...... __________________ 93 Jeep XJ 88 Buick La Sabra Toys; 88 TA-GTA in the works.... 97 GMC Ext. Cab 502 Crate 5 Spd......Sucks Gas But Haulz Azz ! The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic. *"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!*

12-27-2009, 09:36 PM	#13
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,640	Re: What did you get done 12/27/09 edition Had a nice relaxing Christmas weekend, didn't really do much of anything. I mentioned in last weeks thread that my wife and i were getting our oldest daughters car painted. I was asked to post pics, here ya go. Note! I'm going to have my daughter make the wheel decision. Attached Images __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

12-27-2009, 10:17 PM	#14
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,277	Re: What did you get done 12/27/09 edition paint job looks real nice.. I hope she liked it and the custom work is nice too..I just hope my daughter doesnt see this thread or shes gonna want to have me do stuff like that to her car lol __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-27-2009, 10:30 PM	#15
ghettoluxury Registered User Join Date: Apr 2009 Location: Waynesfield Ohio Posts: 1,991	Re: What did you get done 12/27/09 edition Replaced a crank sensor on the Honda __________________ 1949 Five Window, 1973 Step Side, 2000 Z71

12-27-2009, 11:02 PM	#16
Rollinsqrbdy Registered User Join Date: Aug 2008 Location: Dexter, N.M. Posts: 1,082	Re: What did you get done 12/27/09 edition Well i worked on the 84 and finally got it running. Started it rite on time to catch the dallas game. GO DALLAS COWBOYS!!! Old Rusty c10- prayers to your wife and the family. __________________ Its Kool to be a square 2013 Chevy Silverado Z71 w/ 7" lift and 35" Nitto's 1985 C-10 ......My dream truck (under construction) 1984 k 10 Silverado...6" lift with 38.5 super swampers New Mexico Member --- Member of the Square Body Club---

12-27-2009, 11:31 PM	#17
rigon4 Registered User Join Date: Mar 2006 Location: east syracuse ny Posts: 371	Re: What did you get done 12/27/09 edition Old Rusty C10 tell your wife good luck and keep fighting it will be all good in the long run as long as you keep fighting dont give up!!! truck wise i did nothing __________________ 1981 K-5 Blazer 2wd 1985 C-10 Short step 1988 C-10 Suburban



Register or Log In To remove these advertisements.

12-28-2009, 07:08 AM	#19
AceX >130dB Moderator Join Date: Aug 2006 Location: Sacramento, CA Posts: 2,130	Re: What did you get done 12/27/09 edition During the week, I finally got the new wheels on the truck. Rest of my time has ben spent learning engineering and photoshop so I can plan out another build I'm about to start on early next year. Here's teaser; __________________ Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

12-28-2009, 08:38 AM	#20
grinch4om dang its hot Join Date: Nov 2006 Location: frankfort kentucky Posts: 1,349	Re: What did you get done 12/27/09 edition new batterey and oil change...drove it first time in over a month...man big blocks are fun

12-28-2009, 10:50 AM	#21
SSC's76 No No Join Date: Jun 2005 Location: Pueblo Colorado Posts: 1,781	Re: What did you get done 12/27/09 edition I had chopped off my exh when I installed the class 5 hitch that was about 2 years ago. I finially got a chance to put it back on and route it a little better sounds much better with a full exh than having it chopped at the mufflers. Also got all the oil and filter to do and oil change on the truck and the apollo dident quite get to that yet. __________________ 1976 Custom Deluxe SWB Med FMB.3/4 Drop. Gen VI 454, Muncie HD 3 speed With Modified OE Hurst Shifter, 3.73 12 bolt, GMPP HO roller cam, Hooker headers, Performer intake with modified Q-jet, Accel distributor. Best 1/4 12.3 @108. Funnest run 19.84 @88 full 1/4 mile burn out. 1997 K1500 ext cab 5.7 stock except muffler

12-28-2009, 11:14 AM	#22
Mr.Scary Project Optimus Prime Join Date: Jan 2009 Location: Dallas, TX Posts: 346	Re: What did you get done 12/27/09 edition i took my grill completly apart and sanded everything and primed it painted it and clear coated as well and buffed all tha chrome trim of tha grill cause it was very badley weathered and then put everything back 2 gether agian and shined up tha bumper and tha whole nose of it got a make over needless 2 say. nothin done motor wise(2 cold) LOL __________________ 84 SWB work in progress 89 burb 1500 (parts pig) LOL 08 ford focus (I know, I know) Wifes car "I said it b4 and i'll say it agian wiring is my worst enemy":devil:

12-28-2009, 10:29 PM	#23
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: What did you get done 12/27/09 edition Christmas , several get togethers with the family and extended family . Then we spent Sat till today in west Tx deer hunting with my brother-in-law . His place is great! Now to start processing deer . Lots! Frank __________________ Born and proudly residing in a Red State !

12-28-2009, 11:09 PM	#25
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: What did you get done 12/27/09 edition I thought about installing the wireless remote keyless entry I got for Christmas on Fred, but decided against it. Goofed off with the kiddos instead. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

Register or Log In To remove these advertisements.