|
01-11-2010, 01:27 PM
|
#1 |
|
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Front Hub/Lug Specs
I wanted to see if someone could review the specs I have below. I had this information written down for reference, and wanted to confirm the information was still correct.
The measurements reference the front hub/lug for a 6-lug rotor: Lug Pattern: 6 on 5.5 ECE 6-lug rotor: 7/16 Stud Depth (top of dust cap to wheel mounting surface on rotor): 3" Hub (width at largest opening): 3 3/16" across If someone could explain the last measurement to me as well I would appreciate it... confused in MO! 
__________________
-Nate  1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) |
|
|
|
01-11-2010, 02:59 PM
|
#2 |
|
member #16
 
Join Date: Dec 1999
Location: Yuba City Ca.
Posts: 3,618
|
Re: Front Hub/Lug Specs
Could that mean diameter?
__________________
john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/ |
|
|
|
|
01-11-2010, 03:08 PM
|
#3 |
|
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Re: Front Hub/Lug Specs
I'm curious is that measurement is referring to the opening say on a rally wheel? (where the "hub" comes through the wheel)
__________________
-Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
