SD Raised dropmember question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

energiesource · 01-11-2010, 07:11 PM

So I was looking at a kit from suicide doors.com and i saw the front raised drop member kit. it says it uses a mustang rack and pinion steering system, but can you use a 67-72 steering column or do you need a mustang steering column?

i emailed them but no response.

**N2TRUX** · 01-11-2010, 08:12 PM

You still use the 67-72 column. You will need to modify the shaft and add a u-joint-

Do some research in the suspension section. There are a gazillion posts there about the original "Dropmember" by Porterbuilt and the Dropped Crossmember by Suicide Doors.

n2billet · 01-11-2010, 08:18 PM

Quote:

Originally Posted by N2TRUX

You still use the 67-72 column. You will need to modify the shaft and add a u-joint-

Do some research in the suspension section. There are a gazillion posts there about the original "Dropmember" by Porterbuilt and the Dropped Crossmember by Suicide Doors.

You will need 2.) 3/4-36 x 3/4 DD Steering u-joints and 1.) 3/4DD steering shaft about 15 inches or so......just got my in for my Porterbuilt Dropmember which uses the Mustang II rack as well..

energiesource · 01-11-2010, 08:46 PM

i tried searching but really didnt find anything. only reason id go with the SD kit over porterbuilt is the price.

**lolife99** · 01-11-2010, 08:49 PM

Quote:

Originally Posted by energiesource

i tried searching but really didnt find anything. only reason id go with the SD kit over porterbuilt is the price.

I would do some more reading,...
and then call Nate Porter.

*Shane* · 01-11-2010, 08:55 PM

Quote:

Originally Posted by lolife99

I would do some more reading,...
and then call Nate Porter.

If you have personal experience with BOTH kits and have first-hand information that make one kit superior to the other, then by all means share it with us. But just saying "do some reading, then call so & so" is not really fair and partial advice to all concerned.

**lolife99** · 01-11-2010, 09:03 PM

Quote:

Originally Posted by Shane

If you have personal experience with BOTH kits and have first-hand information that make one kit superior to the other, then by all means share it with us. But just saying "do some reading, then call so & so" is not really fair and partial advice to all concerned.

Excellent point.
I'll delete my post.

PBFAB.COM · 01-11-2010, 10:47 PM

Quote:

Originally Posted by Shane

If you have personal experience with BOTH kits and have first-hand information that make one kit superior to the other, then by all means share it with us. But just saying "do some reading, then call so & so" is not really fair and partial advice to all concerned.

Keith has purchased several of my products, including DROPMEMBERS (plural). I would say he is perfectly qualified to suggest somebody call me.

One main difference between the two kits is that the Dropmember comes with installation instructions. The price is the same.

texastrendz · 01-11-2010, 10:56 PM

porterbuilt=class act

*Shane* · 01-12-2010, 08:19 AM

Quote:

Originally Posted by porterbuilt

Keith has purchased several of my products, including DROPMEMBERS (plural). I would say he is perfectly qualified to suggest somebody call me.

One main difference between the two kits is that the Dropmember comes with installation instructions. The price is the same.

That's all fine and well Nate, but the original poster specifically ASKED about a different product all together thus my earlier reply.

**N2TRUX** · 01-12-2010, 10:15 AM

Quote:

Originally Posted by Shane

That's all fine and well Nate, but the original poster specifically ASKED about a different product all together thus my earlier reply.

Lolife99 was not responding to the original poster. He responded to energiesource with a valid point. He quoted exactly what his reply was toward. His post was valid, and certainly did not require you to chastise him.

Your post was reported as trolling. Do I need to quote the rules?

*Shane* · 01-12-2010, 10:21 AM

Quote:

IV. Pure trolling, either to upset someone or simply for your personal
enjoyment, is strictly prohibited. If you're here to cause trouble, it will be a very short stay. Immediate BAN and you will be reported to your ISP.

energiesource IS the original poster ...

My apologies to everyone as my post was not intended at a troll.

**N2TRUX** · 01-12-2010, 12:05 PM

Quote:

Originally Posted by Shane

energiesource IS the original poster ....

I stand corrected on that point.

01-11-2010, 07:11 PM	#1
energiesource Registered User Join Date: Apr 2007 Location: Edmonton, AB, CAN Posts: 346	SD Raised dropmember question So I was looking at a kit from suicide doors.com and i saw the front raised drop member kit. it says it uses a mustang rack and pinion steering system, but can you use a 67-72 steering column or do you need a mustang steering column? i emailed them but no response. Last edited by energiesource; 01-11-2010 at 07:12 PM.

01-11-2010, 08:12 PM	#2
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: SD Raised dropmember question You still use the 67-72 column. You will need to modify the shaft and add a u-joint- Do some research in the suspension section. There are a gazillion posts there about the original "Dropmember" by Porterbuilt and the Dropped Crossmember by Suicide Doors. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" Last edited by N2TRUX; 01-11-2010 at 08:14 PM.

01-11-2010, 08:46 PM	#4
energiesource Registered User Join Date: Apr 2007 Location: Edmonton, AB, CAN Posts: 346	Re: SD Raised dropmember question i tried searching but really didnt find anything. only reason id go with the SD kit over porterbuilt is the price.

01-11-2010, 10:56 PM	#9
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: SD Raised dropmember question porterbuilt=class act



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.