Dash Pad/Board - The 1947 - Present Chevrolet & GMC Truck Message Board Network

asickber · 01-11-2010, 07:33 PM

I'm looking to improve on the looks of my dash board and dash pad. I'll get the pad from LMC unless anyone on here has anything bad to say about the quality of their product. Does anyone know where I can get the dash board between the pad and the windshield?

GREASEMONKEY72 · 01-11-2010, 07:38 PM

there is no dashboard between the pad and the windshield other than the steel part of the dashboard

jay6891 · 01-11-2010, 07:58 PM

Unless you buy this of coarse..
Here is an install on our truck http://www.justdashes.com/Forms/Dash_Instructions.pdf

AirSpeed · 01-11-2010, 09:14 PM

You can get the same dash pad from "ClassicParts" for $10 less than LMC. I just bought one and they are very nice. The black pads are ten bucks less than other colors. I recovered the pad in my 69 with new vinyl a few years ago, it cost about $5 for the vinyl. If you are handy you could do that.

lumpy81 · 01-11-2010, 10:09 PM

Quote:

Originally Posted by jay6891

Unless you buy this of coarse..
Here is an install on our truck http://www.justdashes.com/Forms/Dash_Instructions.pdf

How much are those dash pads? I didn't see the price on the website.

jay6891 · 01-11-2010, 10:55 PM

I have heard somewhere in the 300 to 400 range. I know,,, Ouch.

Voodoo Child · 01-12-2010, 10:52 AM

i have a black pad from LMC and i recommend it. looks great, and installation was a piece of cake.

cdowns · 01-12-2010, 11:53 AM

you can get a piece of shag carpet an cut to fit for that retro look

PanelDeland · 01-12-2010, 05:03 PM

You will probably save some $$ over LMC by buying from a BB vendor.Plus they actually know about these trucks.

**Already Gone** · 01-12-2010, 05:18 PM

Quote:

Originally Posted by lumpy81

How much are those dash pads? I didn't see the price on the website.

I don't know why they do not advertise prices. I called one time to get a price and was on hold for 10 minutes before I hung up. The next time I called I got a person ( it was a boiler room atmosphere) and they were all over the place with prices. I'm thinking the phone sales staff is on commission and have a bottom line they can sell something for but if they can get more money from someone they make more commision.

I am going to get one of these but have decided to wait untill the next time I'm in California with a vehicle( which may be this coming April ) and just go to their store and do the cash and carry thing.

faribran · 01-12-2010, 05:41 PM

CDOWNS... i like the way you think...... LOL

01-11-2010, 07:33 PM	#1
asickber Registered User Join Date: Nov 2005 Location: Birdseye, IN Posts: 99	Dash Pad/Board I'm looking to improve on the looks of my dash board and dash pad. I'll get the pad from LMC unless anyone on here has anything bad to say about the quality of their product. Does anyone know where I can get the dash board between the pad and the windshield?

01-11-2010, 07:38 PM	#2
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: Dash Pad/Board there is no dashboard between the pad and the windshield other than the steel part of the dashboard __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME Last edited by GREASEMONKEY72; 01-11-2010 at 07:38 PM.

01-11-2010, 07:58 PM	#3
jay6891 Car Knocker Join Date: May 2001 Location: jefferson,arkansas Posts: 664	Re: Dash Pad/Board Unless you buy this of coarse.. Here is an install on our truck http://www.justdashes.com/Forms/Dash_Instructions.pdf Attached Images __________________ 68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit.

01-11-2010, 09:14 PM	#4
AirSpeed Registered User Join Date: Jul 2007 Location: Fall River California Posts: 2,026	Re: Dash Pad/Board You can get the same dash pad from "ClassicParts" for $10 less than LMC. I just bought one and they are very nice. The black pads are ten bucks less than other colors. I recovered the pad in my 69 with new vinyl a few years ago, it cost about $5 for the vinyl. If you are handy you could do that.

01-11-2010, 10:55 PM	#6
jay6891 Car Knocker Join Date: May 2001 Location: jefferson,arkansas Posts: 664	Re: Dash Pad/Board I have heard somewhere in the 300 to 400 range. I know,,, Ouch. __________________ 68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit.

01-12-2010, 10:52 AM	#7
Voodoo Child Registered User Join Date: Dec 2009 Location: Granbury, TX Posts: 52	Re: Dash Pad/Board i have a black pad from LMC and i recommend it. looks great, and installation was a piece of cake. __________________ Garrett '71 Fleetside Chevy

01-12-2010, 11:53 AM	#8
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Dash Pad/Board you can get a piece of shag carpet an cut to fit for that retro look __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

01-12-2010, 05:03 PM	#9
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: Dash Pad/Board You will probably save some $$ over LMC by buying from a BB vendor.Plus they actually know about these trucks. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

01-12-2010, 05:41 PM	#11
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Dash Pad/Board CDOWNS... i like the way you think...... LOL __________________ "



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.