NC NIB 17x8 American Racing 200S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71chevytruckguy · 01-25-2010, 02:16 AM

Set of NIB 17" x 8" American Racing 200S wheels. 5X5" bolt pattern. Comes with matching centers, chrome lug nuts, locks, and valve stems. Think backspacing is 4.5" but I'll have to double check. $700 plus shipping. Chris.

Camaro_nut2001 · 01-25-2010, 06:17 PM

Hello, NICE WHEELS!! How much to ship all four to 37806?

billsbowtie · 01-25-2010, 06:26 PM

chris are these wheels chrome or polished alum?
if you don't mind me asking what did they cost new?
how far are you from asheville n.c.? thanks bill

71chevytruckguy · 01-26-2010, 12:04 AM

Camaro-Shipping to going to be right at $100 via UPS

bills-Polished Alum. Think it was around $1200. About 2 1/2 hours, Kernersville's between Winston-Salem and Greensboro.

billsbowtie · 01-26-2010, 12:29 AM

ok thanks for the info . bill

71chevytruckguy · 01-27-2010, 02:48 PM

ttt

64GMCHorsepower · 01-27-2010, 04:32 PM

Paypal?

We are talking 4 rims correct?

71chevytruckguy · 01-27-2010, 06:04 PM

64GMC-Paypal's fine. Yes, all 4 rims.

64GMCHorsepower · 01-27-2010, 09:16 PM

Well, I have to wait until after this weekend........

If you still have them , I'll hollar at ya....

Thanks

Chad

71chevytruckguy · 02-01-2010, 11:48 AM

ttt

killer71 · 02-01-2010, 12:32 PM

so how come you are selling if i may ask?

71chevytruckguy · 02-01-2010, 02:24 PM

Got laid off last Monday, racing season's comin up and I need money for that and bills, and the direction of the truck they were planned to go on changed. Chris.

laplander · 02-03-2010, 12:11 AM

PM sent......

64GMCHorsepower · 02-04-2010, 04:03 PM

pm sent

71chevytruckguy · 02-10-2010, 06:06 AM

laplander - You have a PM. Chris.

laplander · 02-12-2010, 11:11 PM

Payment sent........

71chevytruckguy · 02-13-2010, 04:37 AM

SOLD to laplander

01-25-2010, 02:16 AM	#1
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	NIB 17x8 American Racing 200S Set of NIB 17" x 8" American Racing 200S wheels. 5X5" bolt pattern. Comes with matching centers, chrome lug nuts, locks, and valve stems. Think backspacing is 4.5" but I'll have to double check. $700 plus shipping. Chris. Attached Images __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's Last edited by 71chevytruckguy; 01-25-2010 at 02:20 AM.

01-25-2010, 06:17 PM	#2
Camaro_nut2001 Chevy Lover Till The End. Join Date: Dec 2009 Location: Mascot TN. Posts: 795	Re: NIB 17x8 American Racing 200S Hello, NICE WHEELS!! How much to ship all four to 37806?

01-25-2010, 06:26 PM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: NIB 17x8 American Racing 200S chris are these wheels chrome or polished alum? if you don't mind me asking what did they cost new? how far are you from asheville n.c.? thanks bill __________________ i have 67/72 chevy truck parts f/s.

01-26-2010, 12:04 AM	#4
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: NIB 17x8 American Racing 200S Camaro-Shipping to going to be right at $100 via UPS bills-Polished Alum. Think it was around $1200. About 2 1/2 hours, Kernersville's between Winston-Salem and Greensboro. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

01-26-2010, 12:29 AM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: NIB 17x8 American Racing 200S ok thanks for the info . bill __________________ i have 67/72 chevy truck parts f/s.

01-27-2010, 02:48 PM	#6
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: NIB 17x8 American Racing 200S ttt __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

01-27-2010, 04:32 PM	#7
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Re: NIB 17x8 American Racing 200S Paypal? We are talking 4 rims correct? __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny Last edited by 64GMCHorsepower; 01-27-2010 at 04:32 PM.

01-27-2010, 06:04 PM	#8
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: NIB 17x8 American Racing 200S 64GMC-Paypal's fine. Yes, all 4 rims. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

01-27-2010, 09:16 PM	#9
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Re: NIB 17x8 American Racing 200S Well, I have to wait until after this weekend........ If you still have them , I'll hollar at ya.... Thanks Chad __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

02-01-2010, 11:48 AM	#10
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: NIB 17x8 American Racing 200S ttt __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

02-01-2010, 12:32 PM	#11
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: NIB 17x8 American Racing 200S so how come you are selling if i may ask? __________________ R.I.P. Killer 71 10/26/07

02-01-2010, 02:24 PM	#12
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: NIB 17x8 American Racing 200S Got laid off last Monday, racing season's comin up and I need money for that and bills, and the direction of the truck they were planned to go on changed. Chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

02-03-2010, 12:11 AM	#13
laplander Registered User Join Date: Nov 2002 Location: NM Posts: 705	Re: NIB 17x8 American Racing 200S PM sent......

02-04-2010, 04:03 PM	#14
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Re: NIB 17x8 American Racing 200S pm sent __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

02-10-2010, 06:06 AM	#15
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: NIB 17x8 American Racing 200S laplander - You have a PM. Chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's



Register or Log In To remove these advertisements.

02-12-2010, 11:11 PM	#16
laplander Registered User Join Date: Nov 2002 Location: NM Posts: 705	Re: NIB 17x8 American Racing 200S Payment sent........

02-13-2010, 04:37 AM	#17
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: NIB 17x8 American Racing 200S SOLD to laplander __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

Register or Log In To remove these advertisements.