Was there ever 427's or 454's.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OldSkool71 · 01-30-2010, 01:29 PM

Was there every any 71-72 trucks produced with a factory 454? Also were there ever any early GM trucks produced with a 427...Just curious I thought I had heard that a few 72's had been given the 454....and my dad said he thought that there was a truck version 427.

Thanks, Ron

Dingfodgy · 01-30-2010, 01:46 PM

I'm not sure of the 454's, but there is a "tall-deck" 427 that was put in the medium duty trucks C40,50,60, etc. These engines are quite a different animal than the 427's you could get in 'vettes, COPO camaro's and Chevelle's, though. For light duty trucks- I'm inclined to say the 396/402 was the only BB offered until '73.

**special-K** · 01-30-2010, 01:49 PM

396 was the only BBC 68/69 and 402 70/72.

**71blksuper4x4** · 01-30-2010, 05:45 PM

Quote:

Originally Posted by special-K

396 was the only BBC 68/69 and 402 70/72.

yep, Tim is correct. Trevor

OldSkool71 · 01-30-2010, 06:15 PM

thank you gentlemen...that clears that up...

MT1972cheyenne · 01-30-2010, 07:14 PM

Some of the "402" badged trucks actually had a 396 in them. Maybe Longhorn Man can elaborate on that.

**John Fabris** · 01-30-2010, 08:44 PM

Quote:

Originally Posted by MT1972cheyenne

Some of the "402" badged trucks actually had a 396 in them. Maybe Longhorn Man can elaborate on that.

Correction, some of the 400 badged truck had either the 402 or 396.

1LIME69 · 01-30-2010, 08:48 PM

I actually have a "tall deck" 427 ci in my truck. I have bored and stroked it to a 525 ci. You can make some really make some big engines out of these "tall Deck" platforms. I think you can go up to a 568 ci. but thats pushing it. My engine came out of a C-50 or C-60 dump truck.

QKENUF4U · 01-30-2010, 11:11 PM

Quote:

Originally Posted by 1LIME69

I actually have a "tall deck" 427 ci in my truck. I have bored and stroked it to a 525 ci. You can make some really make some big engines out of these "tall Deck" platforms. I think you can go up to a 568 ci. but thats pushing it. My engine came out of a C-50 or C-60 dump truck.

SWEET !!!! plus they are torque monsters....

63chevyll · 01-30-2010, 11:13 PM

do the tall decks have a longer rods or stroke??

crm318 · 01-31-2010, 01:19 AM

They have an extra piston ring.

Jacfourteen · 01-31-2010, 05:58 AM

Quote:

Originally Posted by 1LIME69

I actually have a "tall deck" 427 ci in my truck. I have bored and stroked it to a 525 ci. You can make some really make some big engines out of these "tall Deck" platforms. I think you can go up to a 568 ci. but thats pushing it. My engine came out of a C-50 or C-60 dump truck.

what kind of numbers you gettin out of it?

**special-K** · 01-31-2010, 06:41 AM

Quote:

Originally Posted by MT1972cheyenne

Some of the "402" badged trucks actually had a 396 in them. Maybe Longhorn Man can elaborate on that.

Quote:

Originally Posted by John Fabris

Correction, some of the 400 badged truck had either the 402 or 396.

There were 396 badged trucks with 402s and no 402 badged trucks with 396.Just go by my first response for accurate info on the engine itself.The badging just confuses people.

396 was made through`69.
402 took it`s place in`70.
69/70s were badged as 396.
71/72s were badged as 402.
SPIDS?As late as`71 they still listed the motor as a 396.

1LIME69 · 01-31-2010, 12:05 PM

Quote:

Originally Posted by Jacfourteen

what kind of numbers you gettin out of it?

The guy that assembled my engine said I should be getting around 650 hp. and around 650-700 ft/lbs torque. I dont know for sure, never had it on a dyno. It has a 4.310" bore and a 4.500" stroke, compared to a stock standard deck or tall deck 4.250" bore and a 3.760" stroke.

Longhorn Man · 01-31-2010, 12:17 PM

and remember, they were never 'badged' as 402 in the trucks, they were badged as 400's.

63chevyll · 01-31-2010, 08:09 PM

interesting

**special-K** · 01-31-2010, 10:25 PM

Yeah,I always say badged as 402 cuz that`s what it is.But,the badge actually reads 400.What I mean when I say badges is GM still "called" the 402 a 396 in`70 and "called" them a 402 in 71/72.In68/69 GM called the 396 what it was and no bade in`68.

**special-K** · 01-31-2010, 10:45 PM

Yeah,I always say Badged as 402 cuz that`s what it is.But,the badge actually reads 400.What I mean when I say "badged" is GM "called" the 402 a 398 in`70 and "called" them a 402 in 71/72.In 68/69 GM called the 396 what it was with no badge in`68.Thanks for clarifying my clarification Andy.

01-30-2010, 01:29 PM	#1
OldSkool71 C/10 CLUB MEMBER Join Date: Jul 2003 Location: Lakewood, CA Posts: 993	Was there ever 427's or 454's.... Was there every any 71-72 trucks produced with a factory 454? Also were there ever any early GM trucks produced with a 427...Just curious I thought I had heard that a few 72's had been given the 454....and my dad said he thought that there was a truck version 427. Thanks, Ron __________________ -Ron-

01-30-2010, 01:46 PM	#2
Dingfodgy Lemme show you something!! Join Date: Apr 2007 Location: St.Helens, OR. Posts: 876	Re: Was there ever 427's or 454's.... I'm not sure of the 454's, but there is a "tall-deck" 427 that was put in the medium duty trucks C40,50,60, etc. These engines are quite a different animal than the 427's you could get in 'vettes, COPO camaro's and Chevelle's, though. For light duty trucks- I'm inclined to say the 396/402 was the only BB offered until '73. __________________ '67 CST-10 LWB ("Crusty") SOLD '67 GMC SWB ("Murdock") 2000 K1500 Suburban ("Betty") '95 BMW 325i ("Joy")

01-30-2010, 01:49 PM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Was there ever 427's or 454's.... 396 was the only BBC 68/69 and 402 70/72. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-30-2010, 06:15 PM	#5
OldSkool71 C/10 CLUB MEMBER Join Date: Jul 2003 Location: Lakewood, CA Posts: 993	Re: Was there ever 427's or 454's.... thank you gentlemen...that clears that up... __________________ -Ron-

01-30-2010, 07:14 PM	#6
MT1972cheyenne Registered User Join Date: Dec 2006 Location: Montana Posts: 223	Re: Was there ever 427's or 454's.... Some of the "402" badged trucks actually had a 396 in them. Maybe Longhorn Man can elaborate on that.

01-30-2010, 08:48 PM	#8
1LIME69 Registered User Join Date: Nov 2006 Location: Alexis, NC Posts: 182	Re: Was there ever 427's or 454's.... I actually have a "tall deck" 427 ci in my truck. I have bored and stroked it to a 525 ci. You can make some really make some big engines out of these "tall Deck" platforms. I think you can go up to a 568 ci. but thats pushing it. My engine came out of a C-50 or C-60 dump truck. Attached Images __________________ "The Ultimate Sleeper" 69' SWB, Holley EFI 525 ci. BB, TH350, 3.73 Eaton posi/Moser axles, 1350 diveshaft, Vintec's 20"x8.5" and 20"x12", OPP windows, CPP rear coilover conversion

01-30-2010, 11:13 PM	#10
63chevyll gets board easy....... Join Date: Mar 2009 Location: Colorado Springs Posts: 717	Re: Was there ever 427's or 454's.... do the tall decks have a longer rods or stroke??

01-31-2010, 01:19 AM	#11
crm318 Alright Alright Alright Join Date: Mar 2004 Location: Midland, Texas Posts: 1,672	Re: Was there ever 427's or 454's.... They have an extra piston ring. __________________ 1972 Cheyenne Chevrolet red and white 357ci, Vortec heads, GM Performance high rise intake, Comp 268H .454/.454 218/218 110 LSA Quadrajet carb, Flowtech headers, 2.25 40 series HEI, Curve kit, TH 350, 3.07 gears 275/60/15s on 15x8 rallies

01-31-2010, 12:17 PM	#15
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Was there ever 427's or 454's.... and remember, they were never 'badged' as 402 in the trucks, they were badged as 400's.

01-31-2010, 08:09 PM	#16
63chevyll gets board easy....... Join Date: Mar 2009 Location: Colorado Springs Posts: 717	Re: Was there ever 427's or 454's.... interesting

01-31-2010, 10:25 PM	#17
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Was there ever 427's or 454's.... Yeah,I always say badged as 402 cuz that`s what it is.But,the badge actually reads 400.What I mean when I say badges is GM still "called" the 402 a 396 in`70 and "called" them a 402 in 71/72.In68/69 GM called the 396 what it was and no bade in`68. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-31-2010, 10:45 PM	#18
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Was there ever 427's or 454's.... Yeah,I always say Badged as 402 cuz that`s what it is.But,the badge actually reads 400.What I mean when I say "badged" is GM "called" the 402 a 398 in`70 and "called" them a 402 in 71/72.In 68/69 GM called the 396 what it was with no badge in`68.Thanks for clarifying my clarification Andy. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 01-31-2010 at 10:46 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.