New to the forum, here is my 86 swb truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

watindes · 02-18-2010, 07:43 PM

The tag says DRVNSNO and the truck is arctic white, it has a transplant 350 vortec 350 it was a 305 motor. Mods are wheels pinstripes LMC euro front lights and parking lights new LMC floor mat and dash. The engine has a clear distributor cap and rotor and Just4You wire looms with NAPA grape wires. Dual exhaust with a cherry bomb extream muffler and the glovebox was signed by Justin Moore (country singer).
My question is I have lowering springs and since I am on a budget I couldn't buy the spindles, will the truck still be able to be knocked into alignment after the spring install?

Thanks

Jesse

87 STEPPER · 02-18-2010, 08:10 PM

2 the board from sunny So.Florida thats a nice clean truck you have there.

Tezjoe84 · 02-18-2010, 08:16 PM

Welcome from South Oklahoma.... Good lookin Pickup!

STOCKISH · 02-18-2010, 09:55 PM

Should still be able to get close to accurate alignment. I would just wait and do the spindles and springs at the same time if you are still planning on ordering spindles.

jared87350 · 02-18-2010, 11:24 PM

welcome, nice truck. and where can i get that cup holder setup?

*BGRAFX* · 02-18-2010, 11:31 PM

Truck loooks really good! Welcome to the boards

**old Rusty C10** · 02-18-2010, 11:32 PM

looks great!! welcome aboard!!

watindes · 02-18-2010, 11:37 PM

LMC sells the arm rest, great warm welcome, thank you, no spindles in the future, I just want an even 2/2 drop.

Kmart2352 · 02-18-2010, 11:38 PM

looks good and great idea with the 350!

LiveAnimals · 02-19-2010, 12:53 AM

Welcome Nice Rig

**78 Big10 454** · 02-19-2010, 02:04 AM

Jesse, welcome from sunny SoCal and my compliments on a clean lookin' ride. Two thumbs up, my friend!

JohnC · 02-19-2010, 10:19 AM

Welcome to the boards. That's a nice truck you have!

Oldschool82 · 02-19-2010, 11:29 PM

welcome!!!

spinem · 02-20-2010, 01:04 AM

sexy seats

**scotts62** · 02-20-2010, 01:16 AM

Nice truck, welcome from OKC!

slugish · 02-20-2010, 10:48 AM

No problem lining up with 2 in springs .

Ihave 3 in springs on my 84 & it lines up fine.

nice ride & welcome from Va.

slugish · 02-20-2010, 10:50 AM

Quote:

Originally Posted by slugish

No problem lining up with 2 in springs .

Ihave 3 in springs on my 84 & it lines up fine.

nice ride & welcome from Va.

OH I just noticed > Are you from Richmond Va. ?

Driveway Dreams · 02-20-2010, 12:06 PM

Good looking truck! And

You should not have much issue with getting it aligned with the drop springs. Justin Moore has some real good songs. A couple that I can only listen to every so often, but overall good music.

02-18-2010, 07:43 PM	#1
watindes Registered User Join Date: Feb 2010 Location: Richmond Posts: 30	New to the forum, here is my 86 swb truck The tag says DRVNSNO and the truck is arctic white, it has a transplant 350 vortec 350 it was a 305 motor. Mods are wheels pinstripes LMC euro front lights and parking lights new LMC floor mat and dash. The engine has a clear distributor cap and rotor and Just4You wire looms with NAPA grape wires. Dual exhaust with a cherry bomb extream muffler and the glovebox was signed by Justin Moore (country singer). My question is I have lowering springs and since I am on a budget I couldn't buy the spindles, will the truck still be able to be knocked into alignment after the spring install? Thanks Jesse

02-18-2010, 08:10 PM	#2
87 STEPPER STILL PLAYS WITH TRUX Join Date: Nov 2002 Location: Melbourne, Fla. Posts: 2,764	Re: New to the forum, here is my 86 swb truck 2 the board from sunny So.Florida thats a nice clean truck you have there. __________________ ~~Bruce~~ MY 87 STEPPER MY 99 2D/WD TAHOE

02-18-2010, 08:16 PM	#3
Tezjoe84 Registered User Join Date: Jan 2010 Location: Ardmore, Ok Posts: 255	Re: New to the forum, here is my 86 swb truck Welcome from South Oklahoma.... Good lookin Pickup! __________________ Joe 1957 Chevy 3100 Stepside

02-18-2010, 09:55 PM	#4
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: New to the forum, here is my 86 swb truck Should still be able to get close to accurate alignment. I would just wait and do the spindles and springs at the same time if you are still planning on ordering spindles. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

02-18-2010, 11:24 PM	#5
jared87350 Registered User Join Date: Sep 2009 Location: ontario, CA Posts: 86	Re: New to the forum, here is my 86 swb truck welcome, nice truck. and where can i get that cup holder setup?

02-18-2010, 11:31 PM	#6
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: New to the forum, here is my 86 swb truck Truck loooks really good! Welcome to the boards

02-18-2010, 11:32 PM	#7
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,313	Re: New to the forum, here is my 86 swb truck looks great!! welcome aboard!! __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

02-18-2010, 11:37 PM	#8
watindes Registered User Join Date: Feb 2010 Location: Richmond Posts: 30	Re: New to the forum, here is my 86 swb truck LMC sells the arm rest, great warm welcome, thank you, no spindles in the future, I just want an even 2/2 drop. __________________ The ultimate swear! Your mother is a beep beep beepingbeeplorem ipsumbeep beep beepadmiumveniumbeep beep beep beepturolaguliobeep beep beep beep beep beep beep beep hippopotamusbeep beep beep beep beep beepbeep beep beep* Daniel Radcliffe beep beep beep beep with a bucket of beep beep beep beep in a castle far away where no one can hear you beep beep beep beep beep beep soup beep beep beep with a bucket of beep beep Mickey Mouse beep beep with a stick of dinomite beeeeeepppp magical beep beep beep beep ALAKAZAM!

02-18-2010, 11:38 PM	#9
Kmart2352 Registered User Join Date: Apr 2009 Location: Saco, Maine Posts: 151	Re: New to the forum, here is my 86 swb truck looks good and great idea with the 350! __________________ 87 2wd GMC Sierra Classic. 86 4wd GMC Sierra Classic. 95 2wd GMC Sierra. 96 2wd Chevrolet S-10.

02-19-2010, 12:53 AM	#10
LiveAnimals Registered User Join Date: Dec 2008 Location: Antelope, CA Posts: 681	Re: New to the forum, here is my 86 swb truck Welcome Nice Rig __________________ Kameron YESTERDAY IS HISTORY - TOMORROW IS A MYSTERY I'm a Middle ClASS HOLE 07.5 Dodge 3500 CTD -- Daily 73 C10 Factory BB SWB 2WD

02-19-2010, 02:04 AM	#11
78 Big10 454 78 Big10 454 Join Date: Jul 2008 Location: Pismo Beach, CA Posts: 839	Re: New to the forum, here is my 86 swb truck Jesse, welcome from sunny SoCal and my compliments on a clean lookin' ride. Two thumbs up, my friend!

02-19-2010, 10:19 AM	#12
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: New to the forum, here is my 86 swb truck Welcome to the boards. That's a nice truck you have!

02-19-2010, 11:29 PM	#13
Oldschool82 Balls to the wall! Join Date: May 2009 Location: Shreveport Louisiana Posts: 231	Re: New to the forum, here is my 86 swb truck welcome!!!

02-20-2010, 01:04 AM	#14
spinem haha, ford guys... Join Date: Feb 2007 Location: Visalia, CA Posts: 576	Re: New to the forum, here is my 86 swb truck sexy seats

02-20-2010, 01:16 AM	#15
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: New to the forum, here is my 86 swb truck Nice truck, welcome from OKC! __________________ Scott 93 crew cab build Project 62



Register or Log In To remove these advertisements.

02-20-2010, 10:48 AM	#16
slugish Slugish Join Date: Jan 2005 Location: Earlysville, Va. Posts: 1,024	Re: New to the forum, here is my 86 swb truck No problem lining up with 2 in springs . Ihave 3 in springs on my 84 & it lines up fine. nice ride & welcome from Va.

02-20-2010, 12:06 PM	#18
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: New to the forum, here is my 86 swb truck Good looking truck! And You should not have much issue with getting it aligned with the drop springs. Justin Moore has some real good songs. A couple that I can only listen to every so often, but overall good music. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

Register or Log In To remove these advertisements.