interior light door switches on 1970 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

canso · 02-01-2003, 10:52 PM

I have a 1970 chev that I want to put door switches for the interior light. I don't think the General installed these until 72. I know on the 72 there is a bulge on the door post where they are installed. I am lokking for ideas of where anyone else has installed them. I don't think they will look very goood if I put them where the 72's were because the 70 does not have the same bulge. Thanks

cableguy0 · 02-01-2003, 10:59 PM

on my cab that came form a 69 pickup when i had to do a replacement b/c of a bad wreck. i used my harness from the 72. i put the little light switch on the hinge side of the door and there is a little bulge there on my 69 cab. it was directly paralell with the handle to open the little floor vent on the kick panel. i hope this helps

Longhorn Man · 02-02-2003, 12:30 AM

If it is a 70 cab, it should have the bulge. The switch was an option.

02-01-2003, 10:52 PM	#1
canso Registered User Join Date: Jun 2001 Posts: 92	interior light door switches on 1970 I have a 1970 chev that I want to put door switches for the interior light. I don't think the General installed these until 72. I know on the 72 there is a bulge on the door post where they are installed. I am lokking for ideas of where anyone else has installed them. I don't think they will look very goood if I put them where the 72's were because the 70 does not have the same bulge. Thanks

02-01-2003, 10:59 PM	#2
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	on my cab that came form a 69 pickup when i had to do a replacement b/c of a bad wreck. i used my harness from the 72. i put the little light switch on the hinge side of the door and there is a little bulge there on my 69 cab. it was directly paralell with the handle to open the little floor vent on the kick panel. i hope this helps __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

02-02-2003, 12:30 AM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	If it is a 70 cab, it should have the bulge. The switch was an option.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.