IL 68 3/4ton front clip parts, frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

deek114 · 02-26-2010, 04:51 PM

I have a few parts that I do not need. They are left overs from a parts truck I bought. It was originally a Arizona truck.

PS OEM fender w/ lense has damaged front. would be perfect for donor metal for patch panel $20 + shipping

DS OEM fender w/ lense is great has small ding in front bottom can be seen in pic and only minor surface rust. GOOD OEM never been touched $150 + shipping

DS inner fender starting to rust through in the front corner, but not horrible yet $40 + shipping

Radiator Core Support rusty on buttom has both head lights still in it $35 SOLD!

68 OEM grille w/ hood latch assembly and both head light bezel. In good shape grille does have a mark on the top not bad though $125 + shipping SOLD!

I would prefer to sale locally and not ship, but I will ship because I need to make space.

Thanks for looking

deek114 · 02-26-2010, 04:53 PM

Here is the frame I do not want to part out I will take offers for complete rolling chasis. Does have auxillary leafs on both sides just can not see the other in the picture.

deek114 · 02-26-2010, 04:57 PM

Also I have a 12 valve cummins diesel out of a 1995 Dodge 3500. It has 206K miles. Included with this is all of the wiring, computer, intercooler, fuel sender, fuel lines, fuel tank, and even the exhaust pipe. This is EVERYTHING you need for a complete swap except an alternator. This was running in the truck the second week of january. I do believe that it does have the desired "P" injection pump.

This has never had a chip, or anything other than stock equipment used with it. It is a good strong diesel engine.

Will consider trades for Chevrolet Trucks up to 47-97, parts, project cars, or even firearms and cash. I will consider meeting anyone that is travelling half way. I am asking 3000 obo

Thanks

deek114 · 02-27-2010, 01:06 PM

69-72 Left and Right headlamp mount w/ retainers $30 pair + shipping

Blue retractable seat belt i think its the DS $10 + shipping

69-72 DS headlight bezel $10 + shipping

NEW 67-72 Complete Cab Mounting Kit $100 + shipping

NEW 69-72 Windshield Rubber (standard) $20 + shipping SOLD!

deek114 · 03-03-2010, 02:16 AM

Anyone??? make offers the stuff needs to go.

jorgensensc · 03-03-2010, 02:58 AM

Are the cab mounts rubber? Are they for a 3/4 ton or 1/2 ton? If they are rubber and for a 1/2 ton I can do 80.00 shipped to 77018.
Let me know.
Shawn

deek114 · 03-03-2010, 01:53 PM

Quote:

Originally Posted by jorgensensc

Are the cab mounts rubber? Are they for a 3/4 ton or 1/2 ton? If they are rubber and for a 1/2 ton I can do 80.00 shipped to 77018.
Let me know.
Shawn

They are rubber. I am missing the front two rubber pieces, but they are for a 3/4 ton.

Thanks for the interest Im sorry I couldnt help.

evilways · 03-03-2010, 08:13 PM

Do you still have the Core Support? Could you post more pics of it? Thanks

deek114 · 03-04-2010, 01:21 AM

Quote:

Originally Posted by evilways

Do you still have the Core Support? Could you post more pics of it? Thanks

Yes I still have it. I will try to get some pics posted tomorrow.

DBear · 03-04-2010, 02:32 AM

I am interested in the grille assembly....let me know how much to ship to 75088. thanks, Tommy

evilways · 03-04-2010, 08:50 AM

Quote:

Originally Posted by deek114

Yes I still have it. I will try to get some pics posted tomorrow.

I do appreciate it.

deek114 · 03-04-2010, 04:00 PM

Here are the pis of the core support.

DBear · 03-04-2010, 04:03 PM

how bout that grille assembly Deek??

evilways · 03-04-2010, 05:46 PM

PM sent

deek114 · 03-06-2010, 01:31 AM

Core support is sold. Thank you very much evilways.

deek114 · 03-10-2010, 10:31 PM

Dropping price on the cummins. I will take $2200 for it. I need it out of the way so I can put the frame in the garage. If anyone is interested let me know maybe we can make some kind of deal.

Tkmadone · 03-11-2010, 01:37 AM

Do you have the outer front bumper brackets?

deek114 · 03-11-2010, 04:35 AM

Quote:

Originally Posted by Tkmadone

Do you have the outer front bumper brackets?

no i don't. sorry i couldnt help you but thanks for the interest

deek114 · 03-23-2010, 12:00 AM

if anyone is interested in that frame im wanting $200 for it. i have not taken anything off of it. so it is all there

LTRAJE · 03-24-2010, 06:57 AM

interested in the 12 valve cummins if it could fit a 67 pickup engine bay and be shipped to Hawaii.

Dzlhead · 03-24-2010, 09:30 AM

PM sent reguarding inner fender.

Big-Blue · 03-24-2010, 10:23 PM

Interested in the fenders and the cab mounts. PM sent.

Put me second in line for the inner too.

deek114 · 03-25-2010, 01:46 AM

Quote:

Originally Posted by LTRAJE

interested in the 12 valve cummins if it could fit a 67 pickup engine bay and be shipped to Hawaii.

It will fit there is one guy on the forum that has pics of him putting his in. the only problem i can see is its gonna cost A LOT to ship to you. I can look it up if you are really interested.

btullis99 · 03-25-2010, 04:36 AM

i'm interested in the grill assembly. pm sent.

thanks

deek114 · 03-26-2010, 12:18 AM

Here are more pics of the DS Fender damage, and the DS Inner Fenders rust spot.

02-26-2010, 04:51 PM	#1
deek114 Registered User Join Date: Jan 2009 Location: decatur, IL. Posts: 162	68 3/4ton front clip parts, frame I have a few parts that I do not need. They are left overs from a parts truck I bought. It was originally a Arizona truck. PS OEM fender w/ lense has damaged front. would be perfect for donor metal for patch panel $20 + shipping DS OEM fender w/ lense is great has small ding in front bottom can be seen in pic and only minor surface rust. GOOD OEM never been touched $150 + shipping DS inner fender starting to rust through in the front corner, but not horrible yet $40 + shipping Radiator Core Support rusty on buttom has both head lights still in it $35 SOLD! 68 OEM grille w/ hood latch assembly and both head light bezel. In good shape grille does have a mark on the top not bad though $125 + shipping SOLD! I would prefer to sale locally and not ship, but I will ship because I need to make space. Thanks for looking Attached Images __________________ Friends don't let friends drive fords. Last edited by deek114; 03-27-2010 at 05:52 PM.

02-26-2010, 04:53 PM	#2
deek114 Registered User Join Date: Jan 2009 Location: decatur, IL. Posts: 162	Re: 68 3/4ton front clip parts, frame Here is the frame I do not want to part out I will take offers for complete rolling chasis. Does have auxillary leafs on both sides just can not see the other in the picture. Attached Images __________________ Friends don't let friends drive fords. Last edited by deek114; 02-27-2010 at 01:09 PM.

02-26-2010, 04:57 PM	#3
deek114 Registered User Join Date: Jan 2009 Location: decatur, IL. Posts: 162	Re: 68 3/4ton front clip parts, frame Also I have a 12 valve cummins diesel out of a 1995 Dodge 3500. It has 206K miles. Included with this is all of the wiring, computer, intercooler, fuel sender, fuel lines, fuel tank, and even the exhaust pipe. This is EVERYTHING you need for a complete swap except an alternator. This was running in the truck the second week of january. I do believe that it does have the desired "P" injection pump. This has never had a chip, or anything other than stock equipment used with it. It is a good strong diesel engine. Will consider trades for Chevrolet Trucks up to 47-97, parts, project cars, or even firearms and cash. I will consider meeting anyone that is travelling half way. I am asking 3000 obo Thanks Attached Images __________________ Friends don't let friends drive fords. Last edited by deek114; 02-26-2010 at 05:43 PM.

02-27-2010, 01:06 PM	#4
deek114 Registered User Join Date: Jan 2009 Location: decatur, IL. Posts: 162	Re: 68 3/4ton front clip parts, frame 69-72 Left and Right headlamp mount w/ retainers $30 pair + shipping Blue retractable seat belt i think its the DS $10 + shipping 69-72 DS headlight bezel $10 + shipping NEW 67-72 Complete Cab Mounting Kit $100 + shipping NEW 69-72 Windshield Rubber (standard) $20 + shipping SOLD! Attached Images __________________ Friends don't let friends drive fords. Last edited by deek114; 03-27-2010 at 05:52 PM.

03-03-2010, 02:16 AM	#5
deek114 Registered User Join Date: Jan 2009 Location: decatur, IL. Posts: 162	Re: 68 3/4ton front clip parts, frame Anyone??? make offers the stuff needs to go. __________________ Friends don't let friends drive fords.

03-03-2010, 02:58 AM	#6
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: 68 3/4ton front clip parts, frame Are the cab mounts rubber? Are they for a 3/4 ton or 1/2 ton? If they are rubber and for a 1/2 ton I can do 80.00 shipped to 77018. Let me know. Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

03-03-2010, 08:13 PM	#8
evilways Registered User Join Date: Mar 2008 Location: Lafayette, IN Posts: 226	Re: 68 3/4ton front clip parts, frame Do you still have the Core Support? Could you post more pics of it? Thanks __________________ Mark 1967 C/10 stepside lwb daily driver 1968 C/10 fleetside lwb parts truck 1971 Cheyenne Super swb project

03-04-2010, 02:32 AM	#10
DBear Registered User Join Date: Nov 2008 Location: Rowlett, TX Posts: 863	Re: 68 3/4ton front clip parts, frame I am interested in the grille assembly....let me know how much to ship to 75088. thanks, Tommy

03-04-2010, 04:00 PM	#12
deek114 Registered User Join Date: Jan 2009 Location: decatur, IL. Posts: 162	Re: 68 3/4ton front clip parts, frame Here are the pis of the core support. Attached Images __________________ Friends don't let friends drive fords.

03-04-2010, 04:03 PM	#13
DBear Registered User Join Date: Nov 2008 Location: Rowlett, TX Posts: 863	Re: 68 3/4ton front clip parts, frame how bout that grille assembly Deek??

03-04-2010, 05:46 PM	#14
evilways Registered User Join Date: Mar 2008 Location: Lafayette, IN Posts: 226	Re: 68 3/4ton front clip parts, frame PM sent __________________ Mark 1967 C/10 stepside lwb daily driver 1968 C/10 fleetside lwb parts truck 1971 Cheyenne Super swb project

03-06-2010, 01:31 AM	#15
deek114 Registered User Join Date: Jan 2009 Location: decatur, IL. Posts: 162	Re: 68 3/4ton front clip parts, frame Core support is sold. Thank you very much evilways. __________________ Friends don't let friends drive fords.

03-10-2010, 10:31 PM	#16
deek114 Registered User Join Date: Jan 2009 Location: decatur, IL. Posts: 162	Re: 68 3/4ton front clip parts, frame Dropping price on the cummins. I will take $2200 for it. I need it out of the way so I can put the frame in the garage. If anyone is interested let me know maybe we can make some kind of deal. __________________ Friends don't let friends drive fords.

03-11-2010, 01:37 AM	#17
Tkmadone Registered User Join Date: Aug 2009 Location: Simi Valley, CA Posts: 193	Re: 68 3/4ton front clip parts, frame Do you have the outer front bumper brackets?

03-23-2010, 12:00 AM	#19
deek114 Registered User Join Date: Jan 2009 Location: decatur, IL. Posts: 162	Re: 68 3/4ton front clip parts, frame if anyone is interested in that frame im wanting $200 for it. i have not taken anything off of it. so it is all there __________________ Friends don't let friends drive fords.



Register or Log In To remove these advertisements.

03-24-2010, 06:57 AM	#20
LTRAJE Registered User Join Date: Mar 2010 Location: Makawao Hawaii Posts: 15	Re: 68 3/4ton front clip parts, frame interested in the 12 valve cummins if it could fit a 67 pickup engine bay and be shipped to Hawaii.

03-24-2010, 09:30 AM	#21
Dzlhead Registered User Join Date: Jan 2009 Location: Brookfield,WI Posts: 50	Re: 68 3/4ton front clip parts, frame PM sent reguarding inner fender. __________________ '66 C-10 Panel '72 Jimmy 4x4

03-24-2010, 10:23 PM	#22
Big-Blue Registered User Join Date: Dec 2008 Location: highland village, TX Posts: 309	Re: 68 3/4ton front clip parts, frame Interested in the fenders and the cab mounts. PM sent. Put me second in line for the inner too.

03-25-2010, 04:36 AM	#24
btullis99 Registered User Join Date: Mar 2010 Location: fairfield IL Posts: 78	Re: 68 3/4ton front clip parts, frame i'm interested in the grill assembly. pm sent. thanks

03-26-2010, 12:18 AM	#25
deek114 Registered User Join Date: Jan 2009 Location: decatur, IL. Posts: 162	Re: 68 3/4ton front clip parts, frame Here are more pics of the DS Fender damage, and the DS Inner Fenders rust spot. Attached Images __________________ Friends don't let friends drive fords.

Register or Log In To remove these advertisements.