Project Slo-go 69 k10

[my67chevytruck]

I picked up this k10 in December '09 and i will slowly start to restore it.
below is a pic of the current condition.

[my67chevytruck]

My son and I got bored today and patched up the cab floor, the po did a hack job... before and after below.... I need to get the final measurement from someone so i know how much to cut off of the leading edge of the patch, i know i need enough material for the bolts on the highhump. Special Thanks to bobvilla for the patch.

[jason65]

Good job on the patchwork. Good luck with your build.

[my67chevytruck]

Thanks Jason!

[msgross]

I love shortbed 4x4's... good luck.

[my67chevytruck]

Originally Posted by msgross

I love shortbed 4x4's... good luck.

Im gonna need it, the po did some hacking on the cab, gonna take alot of patience but i think ill get through it. i need to look through your build thread, i need to find out how much to trim off of the patch panel i installed. is your highhump installed? if not could you snap a pic or tell me more of less the dimension, i am thinking i should just trim it a little longer than the end point where the red line is, then hammer and dolly a lip to add rigidity.

[msgross]

my floor is aftermarket and I had to cut my own hump out... so it's not 100% original

i'd just mark your bolt holes and trim enough to leave a lip. Looks like there is already an outline of the area that you need to trim.

[my67chevytruck]

Thanks Mike! Thats a perfect reference.

[highperf4x4]

I had not seen this! You start on it yet?




it has a pink fender........
i'm just sayin........

[my67chevytruck]

Originally Posted by highperf4x4

I had not seen this! You start on it yet?

Travis, i have only done the cab floor repair, I have the patch panels purchased, just need to find time to do some work on it, need to finish my son's truck up as well....


it has a pink fender........
i'm just sayin........

Travis, i have only done the cab floor repair, I have the patch panels purchased, just need to find time to do some work on it, need to finish my son's truck up as well....
Yeah, your funny bro!

[Eturnit3]

Looks like a nice little project. I dunno what it is about these trucks but even in the "before" stage they look great to me lol. Good luck!! Cant wait for the updates.. Any mods planned?

[my67chevytruck]

I wAs thinking of installing a 5.3 , but thats still in the air.

[highperf4x4]

Juanito has some he could probably loan you one.

[my67chevytruck]

no doubt......

[mcbassin]

any updates on this project?

[my67chevytruck]

Nothing done on it Mike. I am trying to finish my son's truck up. I do have all the sheetmetal patches to start on it when i clear some stuff off my plate.
Thanks for checking in.

[sdailey]

WHAT!!!...no updates. Slacker.

[my67chevytruck]

Shannon, I cant let you be the only Slacker.........

[my67chevytruck]

building the parts stash! I picked up a '72 swb roller and a 350turbo/np205, and a few other pieces

[mcbassin]

Originally Posted by my67chevytruck

building the parts stash! I picked up a '72 swb roller and a 350turbo/np205, and a few other pieces

Nice stash of parts you have there, I had to rotate my moniter to check them out.

[my67chevytruck]

damn Iphone....

[Dieselwrencher]

Nice score!

[my67chevytruck]

Thanks Ryan. I am watching your k build as well. I need some ideas/inspiration. i will start on this after we button up my son's '67....

[Dieselwrencher]

Well, I'm slacking. You have done more to yours than I have mine. Hopefully that will change soon because September is coming quick!

[msgross]

Originally Posted by mcbassin

Nice stash of parts you have there, I had to rotate my moniter to check them out.

I rotated my head!!!