AL Bed Wood - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djracer · 03-06-2010, 09:51 PM

New Long Bed fleetside wood. Could be cut down to fit step side or fleetside long or short bed. Has been sitting around awhile but with a little sanding you could stain it any color. $150.00

mac72 · 03-07-2010, 11:53 AM

How about a pic? What kind of wood?Will you ship it?
Thanks Mac

djracer · 03-07-2010, 04:35 PM

I would ship it but its out of the box so I would have to see if it says anything on the bottom. Where is port charlotte? I'll try to get a couple of pics posted.

mac72 · 03-08-2010, 03:23 PM

In fl. about halfway down on the west coast. Is the wood oak or pine? 10's at 125 must be a helluvu car stereo in that one!

rich67 · 03-08-2010, 03:37 PM

how we comin on pics? interested.

made2drag · 03-08-2010, 09:40 PM

hey kevin, do you still have that 70 something long bed? if you do, how much if i come tow it away for you?

djracer · 03-08-2010, 09:49 PM

Ok guys its a good news bad news deal. The wood is oak but one of the small pieces is missing. Most of the wood looks really good but one or two of the boards have a little moisture damage. If you refinish it like I put in the original ad it would be really nice. This stuff has never been installed but has been sitting around for a long time.

**w314speed** · 03-09-2010, 06:07 AM

PM sent.

rich67 · 03-09-2010, 06:44 AM

could you measure thickness 4 me?

djracer · 03-09-2010, 08:19 AM

I'll measure it but I think its either 5/8 or 3/4

djracer · 03-09-2010, 09:11 AM

wood is 3/4!

djracer · 03-12-2010, 09:37 AM

Someone needs this. I want to put fake wood in my son's truck.

JonFrankMc · 03-12-2010, 12:57 PM

Since a stepside does not have inner wheel wells will the width of the other blanks fit the stepside bed?

Thanks
Jonathan

rich67 · 03-12-2010, 02:23 PM

thanx for measurement.

GreenAcres · 03-12-2010, 02:41 PM

how much to ship to business address 66105?

PM sent

Castiron9 · 03-12-2010, 03:22 PM

Wish it was longer for my LONGHORN.....TTT for you

72freak · 03-12-2010, 06:32 PM

Do you have any family or friends heading to Atlanta in the near future?
Any board members making this run?

djracer · 03-12-2010, 07:47 PM

Sold today guys. It went to Atlanta.

03-06-2010, 09:51 PM	#1
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Bed Wood New Long Bed fleetside wood. Could be cut down to fit step side or fleetside long or short bed. Has been sitting around awhile but with a little sanding you could stain it any color. $150.00 __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-07-2010, 11:53 AM	#2
mac72 Registered User Join Date: Dec 2008 Location: port charlotte,florida Posts: 384	Re: Bed Wood How about a pic? What kind of wood?Will you ship it? Thanks Mac

03-07-2010, 04:35 PM	#3
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Bed Wood I would ship it but its out of the box so I would have to see if it says anything on the bottom. Where is port charlotte? I'll try to get a couple of pics posted. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-08-2010, 03:23 PM	#4
mac72 Registered User Join Date: Dec 2008 Location: port charlotte,florida Posts: 384	Re: Bed Wood In fl. about halfway down on the west coast. Is the wood oak or pine? 10's at 125 must be a helluvu car stereo in that one!

03-08-2010, 03:37 PM	#5
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: Bed Wood how we comin on pics? interested.

03-08-2010, 09:40 PM	#6
made2drag Registered User Join Date: Nov 2009 Location: alabama Posts: 2,079	Re: Bed Wood hey kevin, do you still have that 70 something long bed? if you do, how much if i come tow it away for you?

03-08-2010, 09:49 PM	#7
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Bed Wood Ok guys its a good news bad news deal. The wood is oak but one of the small pieces is missing. Most of the wood looks really good but one or two of the boards have a little moisture damage. If you refinish it like I put in the original ad it would be really nice. This stuff has never been installed but has been sitting around for a long time. Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-09-2010, 06:07 AM	#8
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,315	Re: Bed Wood PM sent.

03-09-2010, 06:44 AM	#9
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: Bed Wood could you measure thickness 4 me?

03-09-2010, 08:19 AM	#10
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Bed Wood I'll measure it but I think its either 5/8 or 3/4 Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-09-2010, 09:11 AM	#11
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Bed Wood wood is 3/4! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-12-2010, 09:37 AM	#12
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Bed Wood Someone needs this. I want to put fake wood in my son's truck. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-12-2010, 12:57 PM	#13
JonFrankMc Registered User Join Date: Mar 2010 Location: Midlothian, Texas Posts: 193	Re: Bed Wood Since a stepside does not have inner wheel wells will the width of the other blanks fit the stepside bed? Thanks Jonathan

03-12-2010, 02:23 PM	#14
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: Bed Wood thanx for measurement.

03-12-2010, 02:41 PM	#15
GreenAcres "I tawt I taw a puddy tat!" Join Date: Feb 2010 Location: KC Posts: 109	Re: Bed Wood how much to ship to business address 66105? PM sent __________________ '67 C/20 LWB CST 283/SM420 FleetWood - project "HELL!" '68 GMC 1500 SWB Fleetside 250/TOT SOLD '70 C/10 454/TH400 LWB SOLD



Register or Log In To remove these advertisements.

03-12-2010, 03:22 PM	#16
Castiron9 72 LONGHORN OWNER Join Date: Sep 2002 Location: Seattle Wash. Posts: 963	Re: Bed Wood Wish it was longer for my LONGHORN.....TTT for you __________________ 72-SUPER CHEYENNE/20 LONGHORN 70-C/30 DUALLY

03-12-2010, 06:32 PM	#17
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: Bed Wood Do you have any family or friends heading to Atlanta in the near future? Any board members making this run? __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

03-12-2010, 07:47 PM	#18
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Bed Wood Sold today guys. It went to Atlanta. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

Register or Log In To remove these advertisements.