Need some pointers on this 67 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rwlfnsh0406 · 03-06-2010, 10:59 PM

HERE IS THE DEAL I BOUGHT THIS TRUCK WITH OUT KNOW ANYTHING ABOUT THE TRUCK. THIS IS A 1967 GMC SHORT BED, IT HAS LEAF SPRINGS IN THE REAR AND 5 LUG WHEELS ALL THE WAY AROUND AND DISK BRAKES UP FRONT AND DRUMS IN THE REAR....IS THIS FACTORY SUSPENSION AND LUG PATTERN FOR THIS TRUCK??? JUST FOR ALL OF YOU WHO KNOW THESE'S TRUCKS UNLIKE ME WHAT WOULD THIS BE WORTH IS HAS A FAIRLY NEW PAINT JOB ON MAYBE 5 YRS OLD AND IS VERY STRAIGHT WITH A MILD 355 THAT RUNS GREAT, RUNS DRIVES AND STOPS WELL.
I WILL POST MORE PICTURES UP OF IT AS I DROP IT AND GET WHEELS ON IT ANY INFORMATION WOULD BE GREAT THANKS EVERYONE

KMACD71 · 03-06-2010, 11:10 PM

Five lugs,front discs are not stock and the side markers on the bed aren't stock for 67 either. Very nice truck and nice upgrades.

Longhorn Man · 03-06-2010, 11:12 PM

GMC trucks were usually equipped with leafs out back.
the 5 lug rear, and 5 lug with disks up front were swapped from a later truck. Yours should be 6 lug 4 wheel drum.
your bed has been swapped out since there are side markers back there, that came out in 68.
Welcome to the board from central Ohio.

**wancosc356** · 03-06-2010, 11:12 PM

First off, WELCOME!

Couldn't tell ya what its worth but it looks nice!

The 5 lug is not factory. Factory for a 67 is 6 lug and no disc brakes up front. The truck could have come with leaf springs or coil springs from the factory. Just depends.

The bed isn't a 67 bed...hence the side marker lights.

rwlfnsh0406 · 03-06-2010, 11:17 PM

All this info is helping me out on this...i order the boss 338 wheels for it and then found this site and was reading about the problems that they have with the wheels not fitting so hope fully they do, if so i will post pictures of the truck with the wheels on it. Anyone have a rough ideal of what it might even be worth ?

**70cst** · 03-07-2010, 01:23 AM

&

from Ohio. Nice looking GMC. Value is really hard to estimate. I look at it this way...if your happy then that's what counts.

**Dan in Pasadena** · 03-07-2010, 01:28 AM

I can only tell you ASKING prices out here in California...which are probably quite a bit different than the Midwest. Out here, in the Central Valley (Bakersfield, Visalia, Fresno) I would not be surprised to see that truck listed as low as $5500. Down here in the Metro L.A. area that could easily be as high as $9-10,000 or more with the newer paint and the upgrades you describe. But of course, "Asking" and "Getting" are two different things.

Leviticus · 03-07-2010, 02:44 AM

I'd say its worth about $100 bucks, I'll send you a paypal payment for $150 just to be a good guy and pick her up tomorrow lol.

Nice truck! Its hard to put a price on it without sitting in front of it, hearing it run, driving it, checking for body rot, seeing what is and isn't original etc.

I'd slap those wheels on it, and enjoy it for a while before gearing up to sell it.

Smallz72project · 03-07-2010, 03:00 AM

Check out the vin decoder on here, that can tell you alot about the truck as well, and if you can post the SPID on the inside of the glove box. Also I could be wrong and did some quick searchs that came up empty but I dont think a sliding rear window was avaliable in 67 was it?

jbristo67 · 03-07-2010, 03:53 AM

Judging from the bed I would wonder if the frame had been shortened

badriv455 · 03-07-2010, 03:16 PM

Nice looking truck for sure. Check your caps lock key on your computer.

rwlfnsh0406 · 03-07-2010, 10:13 PM

well i know for a fact that the bed has not been shortend at all it is an org. short bed.

71meangreenc10 · 03-07-2010, 10:31 PM

Quote:

Originally Posted by rwlfnsh0406

well i know for a fact that the bed has not been shortend at all it is an org. short bed.

Whats the SPID say? if its a true short bed, it will be 115 inches. Wouldnt be a suprise if someone chopped it and put that bed one......

Looks nice though......

Smitty

1LoC10 · 03-07-2010, 11:26 PM

It looks like its already lowered about the most it will go with a drop kit... what was your plans for dropping it more?

rwlfnsh0406 · 03-08-2010, 04:50 PM

Air Ride

michael bustamante · 03-08-2010, 05:39 PM

also its got a big back window, to tell the truth you might want to run the vin and make sure it is actually a true 67, side markers in the rear and a big back window indicate a 68 and up GMC, with a replaced front end. great looking truck though!!

rwlfnsh0406 · 03-08-2010, 06:09 PM

Hey thanks for th tips I just ran the vin and it comes back as a 67 short bed 4x2 that someone must have chenged the bed

*Shane* · 03-08-2010, 06:18 PM

Quote:

Originally Posted by michael bustamante

also its got a big back window, to tell the truth you might want to run the vin and make sure it is actually a true 67, side markers in the rear and a big back window indicate a 68 and up GMC, with a replaced front end. great looking truck though!!

big back window as an option in '67 ...

epashhans · 03-08-2010, 06:34 PM

There is also a vin # stamped on the top of the frame on the drivers side right by the powersteering/a-arm. It should match your cab vin.

With these trucks, a lot of its speculation but some can be determined like everyone is commenting. They have had 40 years to be pieced together. Most of us on here have puzzles so don't feel to bad. Thats the great thing about these trucks is that so many parts can interchange. Who knows, that rear slider doesn't look original to me, so maybe the back window go broke out and they put a slider in then. That kind of stuff can be swapped and changed somewhere along the way since 67.

Its not a stock one, but thats not why you bought it either. I would make it look how you like it and enjoy it. They are fun trucks! It wouldn't take much to make it look like a 67...get a solid back window and fill those back marker lights. Visually no one would say you had a 68 then. Everyone would just be saying "Sweet 67!". Which it is! Also, as you read around here you will see that a lot of GMC's came with leaf rears. I could be wrong, but if you plan on bagging it, trailing arms might be something you should start looking for.

I am not really sure why jbristo67 suggested that he thinks the bed had been cut...?

Good luck and keep us all posted...believe me, we are all fans of pictures! Maybe when you get those 338's mounted!

jbristo67 · 03-09-2010, 01:07 AM

Quote:

Originally Posted by 1LoC10

It looks like its already lowered about the most it will go with a drop kit... what was your plans for dropping it more?

It's not near as low as my truck and mine is a static 5/7

jbristo67 · 03-09-2010, 01:53 AM

Quote:

Originally Posted by epashhans

I am not really sure why jbristo67 suggested that he thinks the bed had been cut...?

Because it had a mismatched bed on it. When I went to look at the truck to buy it the first thing I would have done when I saw that is climb under the truck. Wasn't saying anything bad about the truck just that I thought that it could have been shortend with a later model bed on it

77shortstep · 03-09-2010, 11:32 AM

good looking truck the 5 lug and disc is not original, but in my book was a great upgrade that will only help the value, also i like thats its a gmc you dont see as many of them fixed up with the dual headlamps and gmc grille. all together nice truck as it sits in that first pic if you just cleaned her up and hit it with some semi gloss black under the hood i would value it around 5-6K depending on the buyer. it might also be harder to sell a gmc, but its a factory swb and big back glass so you have those options on your side.

**lks dcvn** · 03-09-2010, 03:29 PM

Agree with Shane - I had a 67 that I parted out that was a big back window.

03-06-2010, 10:59 PM	#1
rwlfnsh0406 Registered User Join Date: Mar 2010 Location: Wolcottville,IN Posts: 7	Need some pointers on this 67 HERE IS THE DEAL I BOUGHT THIS TRUCK WITH OUT KNOW ANYTHING ABOUT THE TRUCK. THIS IS A 1967 GMC SHORT BED, IT HAS LEAF SPRINGS IN THE REAR AND 5 LUG WHEELS ALL THE WAY AROUND AND DISK BRAKES UP FRONT AND DRUMS IN THE REAR....IS THIS FACTORY SUSPENSION AND LUG PATTERN FOR THIS TRUCK??? JUST FOR ALL OF YOU WHO KNOW THESE'S TRUCKS UNLIKE ME WHAT WOULD THIS BE WORTH IS HAS A FAIRLY NEW PAINT JOB ON MAYBE 5 YRS OLD AND IS VERY STRAIGHT WITH A MILD 355 THAT RUNS GREAT, RUNS DRIVES AND STOPS WELL. I WILL POST MORE PICTURES UP OF IT AS I DROP IT AND GET WHEELS ON IT ANY INFORMATION WOULD BE GREAT THANKS EVERYONE Attached Images

03-06-2010, 11:10 PM	#2
KMACD71 Registered User Join Date: Aug 2008 Location: Lethbridge,Alberta Posts: 532	Re: Need some pointers on this 67 Five lugs,front discs are not stock and the side markers on the bed aren't stock for 67 either. Very nice truck and nice upgrades.

03-06-2010, 11:12 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Need some pointers on this 67 GMC trucks were usually equipped with leafs out back. the 5 lug rear, and 5 lug with disks up front were swapped from a later truck. Yours should be 6 lug 4 wheel drum. your bed has been swapped out since there are side markers back there, that came out in 68. Welcome to the board from central Ohio.

03-06-2010, 11:12 PM	#4
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Need some pointers on this 67 First off, WELCOME! Couldn't tell ya what its worth but it looks nice! The 5 lug is not factory. Factory for a 67 is 6 lug and no disc brakes up front. The truck could have come with leaf springs or coil springs from the factory. Just depends. The bed isn't a 67 bed...hence the side marker lights. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

03-06-2010, 11:17 PM	#5
rwlfnsh0406 Registered User Join Date: Mar 2010 Location: Wolcottville,IN Posts: 7	Re: Need some pointers on this 67 All this info is helping me out on this...i order the boss 338 wheels for it and then found this site and was reading about the problems that they have with the wheels not fitting so hope fully they do, if so i will post pictures of the truck with the wheels on it. Anyone have a rough ideal of what it might even be worth ?

03-07-2010, 01:23 AM	#6
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: Need some pointers on this 67 & from Ohio. Nice looking GMC. Value is really hard to estimate. I look at it this way...if your happy then that's what counts. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

03-07-2010, 01:28 AM	#7
Dan in Pasadena Senior Member Join Date: Nov 2008 Location: Glendora, CA Posts: 6,336	Re: Need some pointers on this 67 I can only tell you ASKING prices out here in California...which are probably quite a bit different than the Midwest. Out here, in the Central Valley (Bakersfield, Visalia, Fresno) I would not be surprised to see that truck listed as low as $5500. Down here in the Metro L.A. area that could easily be as high as $9-10,000 or more with the newer paint and the upgrades you describe. But of course, "Asking" and "Getting" are two different things.

03-07-2010, 02:44 AM	#8
Leviticus Shake and Bake! Join Date: Feb 2010 Location: Central Coast, CA Posts: 609	Re: Need some pointers on this 67 I'd say its worth about $100 bucks, I'll send you a paypal payment for $150 just to be a good guy and pick her up tomorrow lol. Nice truck! Its hard to put a price on it without sitting in front of it, hearing it run, driving it, checking for body rot, seeing what is and isn't original etc. I'd slap those wheels on it, and enjoy it for a while before gearing up to sell it. __________________ "All tyranny needs to gain a foothold is for people of good conscience to remain silent." Thomas Jefferson "You are remembered for the rules you break." General Douglas MacArthur "Support Our Troops And The NRA"

03-07-2010, 03:00 AM	#9
Smallz72project Registered User Join Date: May 2005 Location: Missoula, MT Posts: 273	Re: Need some pointers on this 67 Check out the vin decoder on here, that can tell you alot about the truck as well, and if you can post the SPID on the inside of the glove box. Also I could be wrong and did some quick searchs that came up empty but I dont think a sliding rear window was avaliable in 67 was it? __________________ - 1967 Chevy C10 shortbox - 1984 Chevy K10 "Mater"- SWB 305 manual, retired sheriffs truck, Current Frame Off Project - 1986 Chevy K10 LWB 350/350 Daily Driver/project

03-07-2010, 03:53 AM	#10
jbristo67 resident oilfield trash Join Date: Jan 2009 Location: Lubbock TX Posts: 1,465	Re: Need some pointers on this 67 Judging from the bed I would wonder if the frame had been shortened __________________ 1967 SWB C10 396/400 factory air factory tach (sadly had to send to a new home) 1986 Honda 70 Fourtrax 1991 Chevrolet K5 blazer 2wd 1982 Mastercraft Pro Star 190 Stars and Stripes 2002 Chevrolet Tahoe 2011 Nissan Armada

03-07-2010, 03:16 PM	#11
badriv455 '67 Chevy C-50 Join Date: Feb 2008 Location: Monticello, IA Posts: 62	Re: Need some pointers on this 67 Nice looking truck for sure. Check your caps lock key on your computer. __________________ Bad Riv '67 C50 Flatbed Dump '98 Z71 Ext. Cab

03-07-2010, 10:13 PM	#12
rwlfnsh0406 Registered User Join Date: Mar 2010 Location: Wolcottville,IN Posts: 7	Re: Need some pointers on this 67 well i know for a fact that the bed has not been shortend at all it is an org. short bed.

03-07-2010, 11:26 PM	#14
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Need some pointers on this 67 It looks like its already lowered about the most it will go with a drop kit... what was your plans for dropping it more? __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

03-08-2010, 04:50 PM	#15
rwlfnsh0406 Registered User Join Date: Mar 2010 Location: Wolcottville,IN Posts: 7	Re: Need some pointers on this 67 Air Ride

03-08-2010, 05:39 PM	#16
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,841	Re: Need some pointers on this 67 also its got a big back window, to tell the truth you might want to run the vin and make sure it is actually a true 67, side markers in the rear and a big back window indicate a 68 and up GMC, with a replaced front end. great looking truck though!! __________________ 1967custom



Register or Log In To remove these advertisements.

03-08-2010, 06:09 PM	#17
rwlfnsh0406 Registered User Join Date: Mar 2010 Location: Wolcottville,IN Posts: 7	Re: Need some pointers on this 67 Hey thanks for th tips I just ran the vin and it comes back as a 67 short bed 4x2 that someone must have chenged the bed

03-08-2010, 06:34 PM	#19
epashhans Registered User Join Date: Jul 2009 Location: MT Posts: 319	Re: Need some pointers on this 67 There is also a vin # stamped on the top of the frame on the drivers side right by the powersteering/a-arm. It should match your cab vin. With these trucks, a lot of its speculation but some can be determined like everyone is commenting. They have had 40 years to be pieced together. Most of us on here have puzzles so don't feel to bad. Thats the great thing about these trucks is that so many parts can interchange. Who knows, that rear slider doesn't look original to me, so maybe the back window go broke out and they put a slider in then. That kind of stuff can be swapped and changed somewhere along the way since 67. Its not a stock one, but thats not why you bought it either. I would make it look how you like it and enjoy it. They are fun trucks! It wouldn't take much to make it look like a 67...get a solid back window and fill those back marker lights. Visually no one would say you had a 68 then. Everyone would just be saying "Sweet 67!". Which it is! Also, as you read around here you will see that a lot of GMC's came with leaf rears. I could be wrong, but if you plan on bagging it, trailing arms might be something you should start looking for. I am not really sure why jbristo67 suggested that he thinks the bed had been cut...? Good luck and keep us all posted...believe me, we are all fans of pictures! Maybe when you get those 338's mounted! __________________ '67 C-10 Shorty - 454, 5spd, and speed holes!

03-09-2010, 11:32 AM	#22
77shortstep Registered User Join Date: Nov 2009 Location: Lebanon, MO Posts: 215	Re: Need some pointers on this 67 good looking truck the 5 lug and disc is not original, but in my book was a great upgrade that will only help the value, also i like thats its a gmc you dont see as many of them fixed up with the dual headlamps and gmc grille. all together nice truck as it sits in that first pic if you just cleaned her up and hit it with some semi gloss black under the hood i would value it around 5-6K depending on the buyer. it might also be harder to sell a gmc, but its a factory swb and big back glass so you have those options on your side. __________________ 77 CHEVY - SHORT BED STEP SIDE 2WD 02 CHEVY - EXT CAB SHORT BED Z71 7 INCHES OF LIFT

03-09-2010, 03:29 PM	#23
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,339	Re: Need some pointers on this 67 Agree with Shane - I had a 67 that I parted out that was a big back window.

Register or Log In To remove these advertisements.