kick panels where? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

whitelightnin92 · 03-07-2010, 12:50 AM

hi im new here, im restoring a 69 c10 and i am getting ready to sand blast the cab. i have it pretty much stripped down to bare cab and i need to replace the whole kick panel because its rusted from the corner of the windshield area all the way to the floor. ive been looking everywhere for replacement panels and cannot find any. i looked in LMC, classic industries and several others. i would make them, but it would be soo much easier if i could buy them. any help would be great, thanks

**70cst** · 03-07-2010, 01:07 AM

WES
http://www.classicheartbeat.com/

Paul
http://www.gmcpauls.com/

Tim
http://www.christiansclassics.com/

If you are looking as to where to possibly buy...These guys might be able to help out. There are other great Vendors here so maybe they will chime in.

whitelightnin92 · 03-07-2010, 01:18 AM

thanks. i also have to cut out part of the cowl and relace it. most of the panels i see are just the lower half of the kick panel and not the whole thing

**wancosc356** · 03-07-2010, 01:20 AM

If you don't find it repop, you're best bet more than likely will be to find someone cutting up a cab for patches.

whitelightnin92 · 03-07-2010, 01:24 AM

thing is, every truck around here is rusted to pieces. i looked for 6 months to find a truck this clean. its spotless compared to others ive seen

**wancosc356** · 03-07-2010, 01:26 AM

Quote:

Originally Posted by whitelightnin92

thing is, every truck around here is rusted to pieces. i looked for 6 months to find a truck this clean. its spotless compared to others ive seen

I believe you man. Take a look into the for sale section and see if anyone in the drier climates is cutting up a cab for patches.

If not, you can become a site supporter and post a want to buy ad for the patches you need.

Good luck.

whitelightnin92 · 03-07-2010, 01:28 AM

Quote:

Originally Posted by wancosc356

I believe you man. Take a look into the for sale section and see if anyone in the drier climates is cutting up a cab for patches.

If not, you can become a site supporter and post a want to buy ad for the patches you need.

Good luck.

thats not a bad idea. i will see what i can do. thanks.

**wancosc356** · 03-07-2010, 01:31 AM

Quote:

Originally Posted by whitelightnin92

thats not a bad idea. i will see what i can do. thanks.

No problem.

whitelightnin92 · 03-07-2010, 07:14 PM

looks like i will be making the panels

**wancosc356** · 03-07-2010, 07:16 PM

Quote:

Originally Posted by wancosc356

I believe you man. Take a look into the for sale section and see if anyone in the drier climates is cutting up a cab for patches.

If not, you can become a site supporter and post a want to buy ad for the patches you need.

Good luck.

You can still do this. ^^^^^

whitelightnin92 · 03-07-2010, 07:18 PM

yeah, im just hesitant to buy from an individual online

**wancosc356** · 03-07-2010, 07:26 PM

Quote:

Originally Posted by whitelightnin92

yeah, im just hesitant to buy from an individual online

Believe me when I say that the majority of people selling parts on this forum are great people. ALOT....I mean ALOT of parts have been sold and bought on this forum. This is a great place with alot of trustworthy people who are willing to help out. If you are unsure of a seller, ask them if anyone else on the forum who has bought from them can vouch for them.

If I had a cab for patches right now, I would cut them out for you. I just don't.

Just my $0.02

88fordf150 · 11-25-2012, 06:48 PM

Any luck getting a panel? I need one too.

whitelightnin92 · 12-13-2012, 12:07 AM

I cut the old ones out and hand made new ones. I deleted the vents aswell
Posted via Mobile Device

03-07-2010, 12:50 AM	#1
whitelightnin92 Registered User Join Date: Dec 2009 Location: Greenwood, DE Posts: 72	kick panels where? hi im new here, im restoring a 69 c10 and i am getting ready to sand blast the cab. i have it pretty much stripped down to bare cab and i need to replace the whole kick panel because its rusted from the corner of the windshield area all the way to the floor. ive been looking everywhere for replacement panels and cannot find any. i looked in LMC, classic industries and several others. i would make them, but it would be soo much easier if i could buy them. any help would be great, thanks

03-07-2010, 01:07 AM	#2
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: kick panels where? WES http://www.classicheartbeat.com/ Paul http://www.gmcpauls.com/ Tim http://www.christiansclassics.com/ If you are looking as to where to possibly buy...These guys might be able to help out. There are other great Vendors here so maybe they will chime in. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

03-07-2010, 01:18 AM	#3
whitelightnin92 Registered User Join Date: Dec 2009 Location: Greenwood, DE Posts: 72	Re: kick panels where? thanks. i also have to cut out part of the cowl and relace it. most of the panels i see are just the lower half of the kick panel and not the whole thing

03-07-2010, 01:20 AM	#4
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: kick panels where? If you don't find it repop, you're best bet more than likely will be to find someone cutting up a cab for patches. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

03-07-2010, 01:24 AM	#5
whitelightnin92 Registered User Join Date: Dec 2009 Location: Greenwood, DE Posts: 72	Re: kick panels where? thing is, every truck around here is rusted to pieces. i looked for 6 months to find a truck this clean. its spotless compared to others ive seen

03-07-2010, 07:14 PM	#9
whitelightnin92 Registered User Join Date: Dec 2009 Location: Greenwood, DE Posts: 72	Re: kick panels where? looks like i will be making the panels

03-07-2010, 07:18 PM	#11
whitelightnin92 Registered User Join Date: Dec 2009 Location: Greenwood, DE Posts: 72	Re: kick panels where? yeah, im just hesitant to buy from an individual online

11-25-2012, 06:48 PM	#13
88fordf150 Registered User Join Date: Nov 2009 Location: Michigan Posts: 473	Re: kick panels where? Any luck getting a panel? I need one too. __________________ Brad handshoe

12-13-2012, 12:07 AM	#14
whitelightnin92 Registered User Join Date: Dec 2009 Location: Greenwood, DE Posts: 72	Re: kick panels where? I cut the old ones out and hand made new ones. I deleted the vents aswell Posted via Mobile Device __________________ 06 ECSB 4X4 L33 HO 3.73s 15.56@89.9 STOCK 92 K1500 TBI350vortec(too much to list) 69 C10 short fleetside(under construction) 72 C10 short stepside(almost driveable)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.