NM 2 Boxes Of Small Parts To Get Rid Of!! (Part 1) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**michael bustamante** · 03-08-2010, 03:09 PM

All prices plus shipping, Thanks guys!!
*3 voltage regulators, 2 with harness. 1 aftermarket (borg warner) SOLD
*2 coils. 1 an ac delco (orange) and the other an msd Blaster. SOLD
*3 headlight switches. 1 CST with plug,SOLD. 1 NON CST w/plug,7.00. 1 plain 3.00
*3 wiper switches. SOLD, 1 with chrome screw on retainer,3.00 and 1 plain 2.00
* 3 chrome screw on retainers (for the headlight, wiper and choke) 4.00
* 1 headlight brights floor switch with harness pigtail. SOLD
*2 ignition housing plates, 4.00 each
*1 ignition contacts plate (where harness plugs into) 6.00
*2 steering cloumn brackets, (in the engine bay) 4.00 each
*1 glove box door latch (no lock) 3.00
*1 "292" fender emblem 8.00 good mount tabs, has a little overspray but some steel wool will clean it right up
* GMC 1500 v-six fender emblem. good mount tabs. 18.00
*1 GMC 1500 fender emblem good tabs. 7.00

67slammer · 03-08-2010, 04:36 PM

i would like the voltage reg without the harness, the cst headlight switch and the cst wiper switch. price with shipping to pa please. thanks mike

**michael bustamante** · 03-08-2010, 04:46 PM

so that would be 22.00 plus ship, lets say 30.00 usps with a tracking # sound good?
wish I was running a manual tranny Id just trade you for that cool lookin shift knob

**michael bustamante** · 03-08-2010, 08:59 PM

ttt

IndyRich · 03-09-2010, 01:21 AM

The GMC sidemarkers don't have "Sierra" on them do they?

usmcchevy · 03-09-2010, 01:31 AM

I'll take the MSD coil to 39531 please.

CCCC · 03-09-2010, 03:11 AM

I will take the two voltage regulators with harnesses, the Delco coil, the plain wiper switch and the floor headlight brights switch with harness pgtail. Looks like $12.

Would like to pick up in Albuquerque next time I am up. Might want to buy some of the other pieces you have had on here once I see them. If this is OK, please send me a PM so I can find you.
Thanks, CCCC

darthwall · 03-09-2010, 04:47 AM

what is the black headlight switch you have a noncustom either way I want it to 98951

**michael bustamante** · 03-09-2010, 10:59 AM

Quote:

Originally Posted by IndyRich

The GMC sidemarkers don't have "Sierra" on them do they?

no they dont. sorry

**michael bustamante** · 03-09-2010, 11:00 AM

Quote:

Originally Posted by usmcchevy

I'll take the MSD coil to 39531 please.

ill send a pm now with my paypal address and shipping

**michael bustamante** · 03-09-2010, 11:05 AM

Quote:

Originally Posted by CCCC

I will take the two voltage regulators with harnesses, the Delco coil, the plain wiper switch and the floor headlight brights switch with harness pgtail. Looks like $12.

Would like to pick up in Albuquerque next time I am up. Might want to buy some of the other pieces you have had on here once I see them. If this is OK, please send me a PM so I can find you.
Thanks, CCCC

you got it neightbor! theyre all yours. Ill set them aside for you. PM me when you want to come into town and Ill give you directions to the house

**michael bustamante** · 03-09-2010, 11:06 AM

Quote:

Originally Posted by darthwall

what is the black headlight switch you have a noncustom either way I want it to 98951

its a complete switch assy that doesnt have the silver plate on the knob.
its all yours, Ill pm you now

CCCC · 03-09-2010, 08:12 PM

Quote:

Originally Posted by michael bustamante

you got it neightbor! theyre all yours. Ill set them aside for you. PM me when you want to come into town and Ill give you directions to the house

Will take a look at the calendar to figure a date - and then will send a PM.
Thanks, CCCC

oldblue1968chevy · 03-09-2010, 08:53 PM

Whats your wife think about you putting stuff on the washer for a workbench lol!!!!

**michael bustamante** · 03-10-2010, 11:54 AM

believe me I heard it, (i shouldda wiped off the evidence before she got home) lol

**michael bustamante** · 03-12-2010, 07:27 PM

ttt

**michael bustamante** · 03-15-2010, 03:03 PM

ttt last time

rich67 · 03-15-2010, 03:58 PM

do you have knobs for wiper switches? if you have a plain one, no chrome, shoot me a shipped price for wiper switch plus knob and dimmer switch with pigtail to 62312. im assumin they all work. you know? thanx rich

**michael bustamante** · 03-15-2010, 05:00 PM

Quote:

Originally Posted by rich67

do you have knobs for wiper switches? if you have a plain one, no chrome, shoot me a shipped price for wiper switch plus knob and dimmer switch with pigtail to 62312. im assumin they all work. you know? thanx rich

sorry bud the dimmer switch is gone and the wiper knob I have is a cst (silver button on it) I do have the wiper switch still with or without the screw on attatchment crome piece if you need it, ill look in my box o goodies and if I have another dimmer switch ill pm you in the morning

rich67 · 03-16-2010, 04:02 PM

thats ok dude. thanx for looking. rich

03-08-2010, 03:09 PM	#1
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,843	2 Boxes Of Small Parts To Get Rid Of!! (Part 1) All prices plus shipping, Thanks guys!! 3 voltage regulators, 2 with harness. 1 aftermarket (borg warner) SOLD 2 coils. 1 an ac delco (orange) and the other an msd Blaster. SOLD 3 headlight switches. 1 CST with plug,SOLD. 1 NON CST w/plug,7.00. 1 plain 3.00 3 wiper switches. SOLD, 1 with chrome screw on retainer,3.00 and 1 plain 2.00 * 3 chrome screw on retainers (for the headlight, wiper and choke) 4.00 * 1 headlight brights floor switch with harness pigtail. SOLD 2 ignition housing plates, 4.00 each 1 ignition contacts plate (where harness plugs into) 6.00 2 steering cloumn brackets, (in the engine bay) 4.00 each 1 glove box door latch (no lock) 3.00 1 "292" fender emblem 8.00 good mount tabs, has a little overspray but some steel wool will clean it right up GMC 1500 v-six fender emblem. good mount tabs. 18.00 1 GMC 1500 fender emblem good tabs. 7.00 Attached Images __________________ 1967custom Last edited by michael bustamante; 03-15-2010 at 05:12 PM.*

03-08-2010, 04:36 PM	#2
67slammer Registered User Join Date: Jan 2008 Location: muncy pa Posts: 425	Re: 2 Boxes Of Small Parts To Get Rid Of!! (Part 1) i would like the voltage reg without the harness, the cst headlight switch and the cst wiper switch. price with shipping to pa please. thanks mike __________________ 67 short bed stepside tach tilt buddy buckets bagged sittin on 20s and 4w disc brakes (not quite finnished)

03-08-2010, 04:46 PM	#3
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,843	Re: 2 Boxes Of Small Parts To Get Rid Of!! (Part 1) so that would be 22.00 plus ship, lets say 30.00 usps with a tracking # sound good? wish I was running a manual tranny Id just trade you for that cool lookin shift knob __________________ 1967custom Last edited by michael bustamante; 03-08-2010 at 04:49 PM.

03-08-2010, 08:59 PM	#4
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,843	Re: 2 Boxes Of Small Parts To Get Rid Of!! (Part 1) ttt __________________ 1967custom

03-09-2010, 01:21 AM	#5
IndyRich Registered User Join Date: Feb 2009 Location: Indianapolis, IN Posts: 372	Re: 2 Boxes Of Small Parts To Get Rid Of!! (Part 1) The GMC sidemarkers don't have "Sierra" on them do they?

03-09-2010, 01:31 AM	#6
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	Re: 2 Boxes Of Small Parts To Get Rid Of!! (Part 1) I'll take the MSD coil to 39531 please. __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index

03-09-2010, 03:11 AM	#7
CCCC Registered User Join Date: Mar 2007 Location: San Pedro River, SE Arizona Posts: 734	Re: 2 Boxes Of Small Parts To Get Rid Of!! (Part 1) I will take the two voltage regulators with harnesses, the Delco coil, the plain wiper switch and the floor headlight brights switch with harness pgtail. Looks like $12. Would like to pick up in Albuquerque next time I am up. Might want to buy some of the other pieces you have had on here once I see them. If this is OK, please send me a PM so I can find you. Thanks, CCCC __________________ CCCC 67 Sting Ray Coupe 327 4sp; 68 K10 Suburban 327 4sp; 69 K20 Lifted 383 4sp; 69 C80 Fire Truck 478 V6 5sp/2sp; 69 C20 Longhorn 327 4sp; 70 C30 Wrecker 350 4sp; 70 C30 Flat Bed 350 4sp; 71 C20 LWB 350 4sp; 72 K5 Blazer 350 4sp; 72 C30 Flat Bed Gooseneck Hauler with sleeper 350/TH400; 72 C20 Longhorn 402 4sp; 52 Mack LTL Supercharged Cummins 5sp x 3sp; 01 Dodge 5.9 HO Cummins 6spd; 02 Safari Trek 2430 8.1 Vortec on Workhorse Chassis; 03 Silverado 2500 HD 4wd Duramax/Allison Moved but still in the family 70 C20 Custom Camper 350/TH350; 72 K5 Blazer CST Highlander 350/TH350 Recently sent to new homes 72 C30 MoHome 402 4sp; 72 K5 Blazer Conv 350 4sp; 75 GMC 6000 Aerial 350 w Allison; 72 GMC 3500 Utility 350 4sp; 70 GMC 3500, 350 4sp

03-09-2010, 04:47 AM	#8
darthwall Registered User Join Date: Mar 2010 Location: washington Posts: 274	Re: 2 Boxes Of Small Parts To Get Rid Of!! (Part 1) what is the black headlight switch you have a noncustom either way I want it to 98951

03-09-2010, 08:53 PM	#14
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: 2 Boxes Of Small Parts To Get Rid Of!! (Part 1) Whats your wife think about you putting stuff on the washer for a workbench lol!!!! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

03-10-2010, 11:54 AM	#15
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,843	Re: 2 Boxes Of Small Parts To Get Rid Of!! (Part 1) believe me I heard it, (i shouldda wiped off the evidence before she got home) lol __________________ 1967custom

03-12-2010, 07:27 PM	#16
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,843	Re: 2 Boxes Of Small Parts To Get Rid Of!! (Part 1) ttt __________________ 1967custom

03-15-2010, 03:03 PM	#17
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,843	Re: 2 Boxes Of Small Parts To Get Rid Of!! (Part 1) ttt last time __________________ 1967custom

03-15-2010, 03:58 PM	#18
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: 2 Boxes Of Small Parts To Get Rid Of!! (Part 1) do you have knobs for wiper switches? if you have a plain one, no chrome, shoot me a shipped price for wiper switch plus knob and dimmer switch with pigtail to 62312. im assumin they all work. you know? thanx rich

03-16-2010, 04:02 PM	#20
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: 2 Boxes Of Small Parts To Get Rid Of!! (Part 1) thats ok dude. thanx for looking. rich



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.