TX WTB 70 Body Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**425HP409** · 03-16-2010, 06:18 PM

I am restoring a 70 short step with a 250 6Cyl and need some parts.
1. Front clip parts to include, Hood, Left Fender, Right Inner Fender, Grill, Bumper with brackets
2. Left rear fender with side mount spare
3. Tailgate
4. 3 speed transmission with linkage rods from transmission to steering column and dust covers
Wanted, but not important
5. Air conditioner engine bracket for a York Compressor and pulleys
6. Power Steering pump and brackets

rich67 · 03-16-2010, 07:19 PM

have left and right fenders off of 70 i am just starting to part. i believe they are both rust free. drivers side has two small dings above wheel well, i believe easy fix. also have good hood with hinges. have driver grill. outer a few dings, inner fine. have black painted bumper and brackets. bumper needs repainted but i believe straight. have right inner but i believe some rust as i am at work and cant look. will be home in a.m. have no step stuff. will get pics in am. have most already, just have to load them. i will pm you my phone # thanx rich

**wancosc356** · 03-16-2010, 07:22 PM

I have two 69-72 hoods and one stepside tailgate. Here is a link to my thread. I can ship the tailgate, but not the hoods.
http://67-72chevytrucks.com/vboard/s...64172&posted=1

Step side tail gate. It is in pretty good shape. I would say driver quality. A few dings but nothing bad. Also a couple spots that could use some attention due to cracking. I have more detailed pictures if you need them. $100

Hoods. One is a GMC. The other is Chevy. No shipping on these. $75 each

**425HP409** · 03-17-2010, 05:43 PM

I will take the tailgate. I will also take two good horns, high and low note, and the drivers door handle
Does your PS pump have the brackets?

**wancosc356** · 03-17-2010, 05:49 PM

Quote:

Originally Posted by 425HP409

I will take the tailgate. I will also take two good horns, high and low note, and the drivers door handle
Does your PS pump have the brackets?

You got it. Do me a favor and post in my thread that you will take those items. Let me know your zip code and I can get you a shipping quote.

I don't have a high and low note set of horns. They are all just one tone. The PS pump does not have any brackets.

shaneschevys · 03-17-2010, 07:24 PM

I have a decent hood. It needs a little work done on the front. I will take 50.00 for it.

Southern C10 · 03-17-2010, 07:46 PM

I have a 3 speed manual tranny with all the linkage. It came off my 72 C10 with a 350 motor. Its in North Alabama if that helps with shipping.

**425HP409** · 03-17-2010, 11:29 PM

Shaneschevys, I will take the hood. pm me info

**425HP409** · 03-17-2010, 11:30 PM

Southern C10, what do you want for the 3 speed with linkage?

**425HP409** · 03-17-2010, 11:32 PM

wancosc 356, Price me the tailgate and door handle to 75034

**wancosc356** · 03-17-2010, 11:56 PM

Quote:

Originally Posted by 425HP409

wancosc 356, Price me the tailgate and door handle to 75034

Ok. Sounds good. I'll get back to you tomorrow with a shipping quote.

shaneschevys · 03-18-2010, 12:13 AM

Quote:

Originally Posted by 425HP409

Shaneschevys, I will take the hood. pm me info

PM sent

Duncan and son · 03-18-2010, 12:26 AM

Charles if you still need the set of horns let me know and we will send you a pair no charge.
Hope that helps... Paul and Jason

**425HP409** · 03-18-2010, 12:48 PM

ttt

**wancosc356** · 03-18-2010, 04:39 PM

Quote:

Originally Posted by 425HP409

wancosc 356, Price me the tailgate and door handle to 75034

$140 shipped.

Let me know.

Big-Blue · 03-20-2010, 12:43 AM

I have an extra driver's side fender you can have for $50. I got it in a trade and don't need it. I can't tell if it's a repop or original. It has a small dent in the lower front.

If you are interested I can shoot you some pics. I am in Highland Village.

Southern C10 · 03-20-2010, 03:32 PM

Quote:

Originally Posted by 425HP409

Southern C10, what do you want for the 3 speed with linkage?

You can have it for the cost of shipping from 35904 and $40.00 for the materials to package it up. Probably going to need to put it on a wooden pallet.

Brian.

**425HP409** · 03-22-2010, 07:10 PM

Quote:

Originally Posted by Southern C10

You can have it for the cost of shipping from 35904 and $40.00 for the materials to package it up. Probably going to need to put it on a wooden pallet.

Brian.

PM Sent

**425HP409** · 03-22-2010, 09:08 PM

Quote:

Originally Posted by Big-Blue

I have an extra driver's side fender you can have for $50. I got it in a trade and don't need it. I can't tell if it's a repop or original. It has a small dent in the lower front.

If you are interested I can shoot you some pics. I am in Highland Village.

I would like some pics if you have them please. I may have one found here in Frisco, but I will know later this week and let you know. Put me in line for the one you have though.

Charles

03-16-2010, 06:18 PM	#1
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	WTB 70 Body Parts I am restoring a 70 short step with a 250 6Cyl and need some parts. 1. Front clip parts to include, Hood, Left Fender, Right Inner Fender, Grill, Bumper with brackets 2. Left rear fender with side mount spare 3. Tailgate 4. 3 speed transmission with linkage rods from transmission to steering column and dust covers Wanted, but not important 5. Air conditioner engine bracket for a York Compressor and pulleys 6. Power Steering pump and brackets __________________ Charles 68 SWB, Dad bought new, now 396 & factory ac 64 Impala SS, 409 425HP, 4 speed AC 64 Bel Air Wagon, 400 Small Block 57 Bel Air all original 283 w/Factory Air 77 GMC Sprint, 454/425HP 67 Olds 442, all original 90 ZR1 Corvette Last edited by 425HP409; 03-16-2010 at 06:23 PM.

03-16-2010, 07:19 PM	#2
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: WTB 70 Body Parts have left and right fenders off of 70 i am just starting to part. i believe they are both rust free. drivers side has two small dings above wheel well, i believe easy fix. also have good hood with hinges. have driver grill. outer a few dings, inner fine. have black painted bumper and brackets. bumper needs repainted but i believe straight. have right inner but i believe some rust as i am at work and cant look. will be home in a.m. have no step stuff. will get pics in am. have most already, just have to load them. i will pm you my phone # thanx rich

03-16-2010, 07:22 PM	#3
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: WTB 70 Body Parts I have two 69-72 hoods and one stepside tailgate. Here is a link to my thread. I can ship the tailgate, but not the hoods. http://67-72chevytrucks.com/vboard/s...64172&posted=1 Step side tail gate. It is in pretty good shape. I would say driver quality. A few dings but nothing bad. Also a couple spots that could use some attention due to cracking. I have more detailed pictures if you need them. $100 Hoods. One is a GMC. The other is Chevy. No shipping on these. $75 each __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152 Last edited by wancosc356; 03-17-2010 at 12:02 AM. Reason: Added photos

03-17-2010, 05:43 PM	#4
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	Re: WTB 70 Body Parts I will take the tailgate. I will also take two good horns, high and low note, and the drivers door handle Does your PS pump have the brackets? __________________ Charles 68 SWB, Dad bought new, now 396 & factory ac 64 Impala SS, 409 425HP, 4 speed AC 64 Bel Air Wagon, 400 Small Block 57 Bel Air all original 283 w/Factory Air 77 GMC Sprint, 454/425HP 67 Olds 442, all original 90 ZR1 Corvette

03-17-2010, 07:24 PM	#6
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: WTB 70 Body Parts I have a decent hood. It needs a little work done on the front. I will take 50.00 for it. Attached Images __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

03-17-2010, 07:46 PM	#7
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: WTB 70 Body Parts I have a 3 speed manual tranny with all the linkage. It came off my 72 C10 with a 350 motor. Its in North Alabama if that helps with shipping. __________________ 1972 Chevy SWB New 383 Stroker/350 Turbo Some day i'll paint it John 3:16 MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=398108

03-17-2010, 11:29 PM	#8
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	Re: WTB 70 Body Parts Shaneschevys, I will take the hood. pm me info __________________ Charles 68 SWB, Dad bought new, now 396 & factory ac 64 Impala SS, 409 425HP, 4 speed AC 64 Bel Air Wagon, 400 Small Block 57 Bel Air all original 283 w/Factory Air 77 GMC Sprint, 454/425HP 67 Olds 442, all original 90 ZR1 Corvette

03-17-2010, 11:30 PM	#9
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	Re: WTB 70 Body Parts Southern C10, what do you want for the 3 speed with linkage? __________________ Charles 68 SWB, Dad bought new, now 396 & factory ac 64 Impala SS, 409 425HP, 4 speed AC 64 Bel Air Wagon, 400 Small Block 57 Bel Air all original 283 w/Factory Air 77 GMC Sprint, 454/425HP 67 Olds 442, all original 90 ZR1 Corvette

03-17-2010, 11:32 PM	#10
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	Re: WTB 70 Body Parts wancosc 356, Price me the tailgate and door handle to 75034 __________________ Charles 68 SWB, Dad bought new, now 396 & factory ac 64 Impala SS, 409 425HP, 4 speed AC 64 Bel Air Wagon, 400 Small Block 57 Bel Air all original 283 w/Factory Air 77 GMC Sprint, 454/425HP 67 Olds 442, all original 90 ZR1 Corvette

03-18-2010, 12:26 AM	#13
Duncan and son Registered User Join Date: Sep 2009 Location: Lubbock Texas Posts: 1,049	Re: WTB 70 Body Parts Charles if you still need the set of horns let me know and we will send you a pair no charge. Hope that helps... Paul and Jason __________________ You can shear a sheep every year, but you can only skin it once The person dealing with facts is never at the mercy of the person dealing with theory 1972 Cheyenne Super 402 400 A/c bucket seat tilt custom camper Longhorn 1975 Silverado 454 Crew cab camper special dually

03-18-2010, 12:48 PM	#14
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	Re: WTB 70 Body Parts ttt __________________ Charles 68 SWB, Dad bought new, now 396 & factory ac 64 Impala SS, 409 425HP, 4 speed AC 64 Bel Air Wagon, 400 Small Block 57 Bel Air all original 283 w/Factory Air 77 GMC Sprint, 454/425HP 67 Olds 442, all original 90 ZR1 Corvette

03-20-2010, 12:43 AM	#16
Big-Blue Registered User Join Date: Dec 2008 Location: highland village, TX Posts: 309	Re: WTB 70 Body Parts I have an extra driver's side fender you can have for $50. I got it in a trade and don't need it. I can't tell if it's a repop or original. It has a small dent in the lower front. If you are interested I can shoot you some pics. I am in Highland Village.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.