Thank you, paul duncan! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72cheyenneman · 03-27-2010, 08:11 AM

I want to thank Paul Duncan for shipping parts from Lubbock to New Orleans. I bought a 72 truck floor bed bottom, gas tank, and radiator support from Paul, and he took it to a local shipper. This guy packed everything PERFECTLY--professionally--built a wood crate so a forklift could pick it up and load it on my trailer for hauling. I was extremely happy with the crating and mostly with the great parts.

Anyone needing help to crate items for shipping--see Paul. (By the way, don't tell me parts from California can't be shipped to the East coast. My cost from Lubbock, Texas to New Orleans was $500 and we got it in 2 days! So if you're looking for quality parts, just go to "Freightquote.com" for the lowest rates. Damn, this is an expensive hobby...lol.

Here's a picture of me unloading the crate at the body shop. Super job, Paul. I'll be posting some pictures of the restoration--stay tuned to "Grandma's 72 Cheyenne" on this site.

weircc · 03-27-2010, 09:26 AM

It's nice to hear that there is still honest and good ppl out there!!

JRBECK64 · 03-27-2010, 09:34 AM

I just picked up a Short Wide bed from Paul in Lubbock. My Son and I ended up spending a couple of hours talking with Paul and Jason and I will tell you they are Great People. They really treated my Son and I right.

JRBECK64

jbristo67 · 03-28-2010, 09:35 PM

I bet I have spent 2 or 3k with Paul and Jason over the last year. They are great guys and they take good care of me. I even use their shop And their tools ha ha. I was there some if the time he was building your crate man, he spent a good part of 4 days pulling your bed floor for you and building your crate. He never half way does anything.

**yote1234** · 03-28-2010, 10:33 PM

i as well purchased a dash pad from paul,also working on other parts now with him.... great people to deal with!

COACHMEASON · 03-28-2010, 10:38 PM

Ditto...

**68jewel** · 03-29-2010, 12:56 AM

I've used freightquote.com before when I sold my 12 bolt rear end out of my Chevelle and shipped it to Illinois. They found me a very low shipper. That site is great I tell you.

03-27-2010, 08:11 AM	#1
72cheyenneman Registered User Join Date: Nov 2009 Location: New Orleans, Louisiana Posts: 610	Thank you, paul duncan! I want to thank Paul Duncan for shipping parts from Lubbock to New Orleans. I bought a 72 truck floor bed bottom, gas tank, and radiator support from Paul, and he took it to a local shipper. This guy packed everything PERFECTLY--professionally--built a wood crate so a forklift could pick it up and load it on my trailer for hauling. I was extremely happy with the crating and mostly with the great parts. Anyone needing help to crate items for shipping--see Paul. (By the way, don't tell me parts from California can't be shipped to the East coast. My cost from Lubbock, Texas to New Orleans was $500 and we got it in 2 days! So if you're looking for quality parts, just go to "Freightquote.com" for the lowest rates. Damn, this is an expensive hobby...lol. Here's a picture of me unloading the crate at the body shop. Super job, Paul. I'll be posting some pictures of the restoration--stay tuned to "Grandma's 72 Cheyenne" on this site.

03-27-2010, 09:26 AM	#2
weircc Registered User Join Date: Dec 2008 Location: richmond, MO Posts: 794	Re: Thank you, paul duncan! It's nice to hear that there is still honest and good ppl out there!!

03-27-2010, 09:34 AM	#3
JRBECK64 Registered User Join Date: Sep 2008 Location: Cornelius Oregon Posts: 1,073	Re: Thank you, paul duncan! I just picked up a Short Wide bed from Paul in Lubbock. My Son and I ended up spending a couple of hours talking with Paul and Jason and I will tell you they are Great People. They really treated my Son and I right. JRBECK64

03-28-2010, 09:35 PM	#4
jbristo67 resident oilfield trash Join Date: Jan 2009 Location: Lubbock TX Posts: 1,465	Re: Thank you, paul duncan! I bet I have spent 2 or 3k with Paul and Jason over the last year. They are great guys and they take good care of me. I even use their shop And their tools ha ha. I was there some if the time he was building your crate man, he spent a good part of 4 days pulling your bed floor for you and building your crate. He never half way does anything. __________________ 1967 SWB C10 396/400 factory air factory tach (sadly had to send to a new home) 1986 Honda 70 Fourtrax 1991 Chevrolet K5 blazer 2wd 1982 Mastercraft Pro Star 190 Stars and Stripes 2002 Chevrolet Tahoe 2011 Nissan Armada

03-28-2010, 10:33 PM	#5
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,366	Re: Thank you, paul duncan! i as well purchased a dash pad from paul,also working on other parts now with him.... great people to deal with! __________________ 1971 K5 CST Blazer 1951 -3100 5 window short bed 4sp 1965 Chevelle Malibu 283 (sadly sold) 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

03-28-2010, 10:38 PM	#6
COACHMEASON Keep On Keepin' On Join Date: Apr 2006 Location: Oklahoma Posts: 417	Re: Thank you, paul duncan! Ditto... __________________ 07 Avalanche Z71 92 Mustang 5.0 GT (Triple White w/ 53,000 miles) 72 SWB Chevy w/ PS, AC, 350/350 Current Project ....In paint shop getting body/paint work done (Corvette Velocity Yellow)... http://67-72chevytrucks.com/vboard/s...d.php?t=157669

03-29-2010, 12:56 AM	#7
68jewel On the path to financial ruin! Join Date: Jan 2009 Location: Dallas, TX Posts: 722	Re: Thank you, paul duncan! I've used freightquote.com before when I sold my 12 bolt rear end out of my Chevelle and shipped it to Illinois. They found me a very low shipper. That site is great I tell you. __________________ *'72 Chevelle SS--4.0 Whipple LS7, T56 Magnum, 20X9/20X13 HRE 791R, 6-piston Baer brakes, IRS '68 SWB C10--LS3, TKO-600, 22x10/22x12 HRE 948R, C5 suspension, shockwaves, custom frame Ooh Wee's Makeover*...http://67-72chevytrucks.com/vboard/s...d.php?t=376280



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.