Idea's for capping filler hole in cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Arizona oldguy · 04-02-2010, 06:58 PM

I moved the gas tank to the back between the frame rails. I need to cover up the hole that was left in the cab, please share ideas.

68Mike · 04-02-2010, 07:03 PM

Someone might have one on here for cheaper but here's one on Ebay.

http://cgi.ebay.com/ebaymotors/67-72...Q5fAccessories

mbgmike · 04-02-2010, 07:16 PM

Quote:

Originally Posted by 68Mike

Someone might have one on here for cheaper but here's one on Ebay.

http://cgi.ebay.com/ebaymotors/67-72...Q5fAccessories

Thats member here
INFINITI

Just about the only thing you can do or else make a fake cap to look stock.

**Classic Heartbeat** · 04-02-2010, 07:17 PM

What ever you do,,,,,, Do not cut the filler neck off of the tank and put it back in the hole.

. My sone did that and loaned the truck to a good freind of his. Problem was he forgot to tell his freind...

. His freind tried to fill the truck with gas.

and when it started flowing out from under the door, he figured it out.

. Needless to say the truck got new carpet and ran around with coffee grounds all over the floor to get rid of the smell.

WES

Arizona oldguy · 04-02-2010, 08:17 PM

Thanks guys, I purchased one on ebay. And thanks for the fun story, it is only fun because it did not happen to me.

72swb_327stroker_? · 04-02-2010, 08:27 PM

you can buy the sheet metal cut out (like above).... you can then weld it on, or I saw an episode way back on the trucks tv show about patch panels and alternatives to welding.

I think they used fiberglass resin to bond the patch to the sheet metal. I always thought this was cool for a diy, but I personally have not tried it so I have no feedback on this.

PanelDeland · 04-02-2010, 10:18 PM

You could also fit it with a tube and drain and use it to "french" an antenna into.

04-02-2010, 06:58 PM	#1
Arizona oldguy Registered User Join Date: Jan 2009 Location: Queen Creek Arizona Posts: 56	Idea's for capping filler hole in cab I moved the gas tank to the back between the frame rails. I need to cover up the hole that was left in the cab, please share ideas.

04-02-2010, 07:03 PM	#2
68Mike Registered User Join Date: Jan 2007 Location: Salinas,Ca 93906 Posts: 502	Re: Idea's for capping filler hole in cab Someone might have one on here for cheaper but here's one on Ebay. http://cgi.ebay.com/ebaymotors/67-72...Q5fAccessories __________________ Mike Currents: '74 Cheyenne Super C30 Camper Special 3+3 aka "Sucia30" Past: '79 C10 BIG 10 (Sold) 69 CST LWB - Always a "Work in progress" true work truck (stolen) 05 GSXR 750 it has a pretty paint job _wrecked 72 SWB full frame restoration -sold! 71 CST K5 Blazer 4x4 (soon to be 2wd)-project - sold! C10 Club 2012 Brothers Show Video http://youtu.be/pUeV2vP7Wpo

04-02-2010, 07:17 PM	#4
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Re: Idea's for capping filler hole in cab What ever you do,,,,,, Do not cut the filler neck off of the tank and put it back in the hole. . My sone did that and loaned the truck to a good freind of his. Problem was he forgot to tell his freind.... His freind tried to fill the truck with gas. and when it started flowing out from under the door, he figured it out. . Needless to say the truck got new carpet and ran around with coffee grounds all over the floor to get rid of the smell. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

04-02-2010, 08:17 PM	#5
Arizona oldguy Registered User Join Date: Jan 2009 Location: Queen Creek Arizona Posts: 56	Re: Idea's for capping filler hole in cab Thanks guys, I purchased one on ebay. And thanks for the fun story, it is only fun because it did not happen to me.

04-02-2010, 08:27 PM	#6
72swb_327stroker_? knuckle buster.. Join Date: Oct 2007 Location: Frisco Posts: 613	Re: Idea's for capping filler hole in cab you can buy the sheet metal cut out (like above).... you can then weld it on, or I saw an episode way back on the trucks tv show about patch panels and alternatives to welding. I think they used fiberglass resin to bond the patch to the sheet metal. I always thought this was cool for a diy, but I personally have not tried it so I have no feedback on this. __________________ _______________________________________________________________________________ Eric THIS SITE ROCKS!!! Check out my suburban on 20's with fresh paint! Click here to support the site Check out the Member Photo Gallery here StreetCruizin FAQ thread Site vendors list (scroll down to vendors in red) join the the smilies fight club Last edited by 72swb_327stroker_?; 04-02-2010 at 08:30 PM.

04-02-2010, 10:18 PM	#7
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: Idea's for capping filler hole in cab You could also fit it with a tube and drain and use it to "french" an antenna into. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.