What did you get done 4/4 Easter/Passover edition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**old Rusty C10** · 04-04-2010, 05:42 PM

I didnt do anything 82 related. I drove the S10 last week and it was squeaking so i inspected the brakes and found nothing wrong and i decided to shampoo the dirty seats and floor on that.. amazingly they are not black seats they are grey and the floor is not mud brown its black...
did find out the heater core has a leak or something else that makes the passenger side floor wet
How about you all?

*Stitch* · 04-04-2010, 06:25 PM

I took the cab off of my parts truck and cut the front of the frame off...I also took the bed loose, just gotta get someone come help guide it while I take it off with the backhoe...87 chevy silverado on here came over to my house to get some parts...he's a good guy...me and him chewed the fat for a little while...besides that not much more...I'm going to go out to the crew cab in a minute and try and install the driver's door glass and regulator that I pulled earlier

S10Fan · 04-04-2010, 07:15 PM

Another busy weekend.

Now that all the concrete work is complete i cleaned up my backyard and spread some dirt around.

A friend of mine dropped off a new rear end I'll be installing in the Heap. The rear is a 10 bolt with a brand new Richmond Gear 4:10, bearings, brakes, E-brake cables, everything is new. The 4:10 and my 700R should get along very well and help improve my around town fuel mileage.

Made fuel lines for my S-10 and began the process of cleaning her up under the hood. The billet and chrome under the hood didn't do too well while parked outside on the grass. Thankfully my parking on the grass days are over.

I purchased a fuse panel cover (firewall side) from bigblock73, it arrived earlier in the week. Very well made piece, hopefully I'll get it installed next weekend.

Back to work Monday for some rest. LOL

slugish · 04-04-2010, 07:30 PM

Trip to Lowes , honey doo's honey doo's.

Iguess not a ggod way to level out my redneck raked truck > oh well

low79fx · 04-04-2010, 07:37 PM

Went to church.Praise,worship and Glorify Our Risen Lord!!

S10Fan · 04-04-2010, 07:40 PM

Quote:

Originally Posted by slugish

Iguess not a ggod way to level out my redneck raked truck

Um, it does have a nice, um, rake.

LOL

bigblock73 · 04-04-2010, 08:01 PM

Quote:

Originally Posted by S10Fan

I purchased a fuse panel cover (firewall side) from bigblock73, it arrived earlier in the week. Very well made piece, hopefully I'll get it installed next weekend.

Glad you got it and like it thus far. Looking forward to seeing the install and hearing any feedback. Later.

1LowToy · 04-04-2010, 08:10 PM

I negotiated a deal for a parts truck that has already been mostly parted out. The goodies left on it will make it worth my while. The front end got bent and I noticed the main front crossmember cracked which is very odd. I'll post pics when I get a chance. Got to get it home yet to finish it off.

I rebuilt the carb on my 250/6 and I'm only half impressed with how that came out. I should have noted the metering rod size for referrance while I had it appart. As it turns out it's still on the lean side. Better than it was but not perfect.

Restrorob · 04-04-2010, 08:12 PM

Sanded on some sport mirrors I bought from JWALL for my 97, Gotta give um a coat of gloss black before install.....

Slofarmtruck · 04-04-2010, 09:05 PM

Cut a half a coil off front springs to level the ride height/clean up 20+ years of grease and rust on the front suspension and steering. Followed by using the truck to go pick up my T5 trans and accessories for the project car. I love having a truck again!

Kalashnikov46 · 04-04-2010, 09:22 PM

nice license plate!

kelsfine69 · 04-04-2010, 09:30 PM

I took all the Ralleys off and gave them a good sanding and then gave them a freah coat of silver and clear.. Then took all the sills off and gave them a coat of black paint...repainted the rockers where you step and also took the kickpanels off and the brake/gas pedals and cleaned them before reinstalling them...Gave the inside of the truck a good cleaning...Still need to get on the carpet.....

staggerd86c-10 · 04-04-2010, 09:31 PM

well i finished up my train horn under my truck and got it all up and running, I also attempted to put the camaro swaybar on the rear of the truck but it didn't work. I also added a toolbox in the back of my truck but im not sure if im keeping it or not so i didnt bolt it in yet. And i got her all washed up for the weekly hangout but i never got there. That was friday. Saturday i took my dash apart to find out why my speedo stopped working turns out the angle of the cable kinked it and just broke the cable at the bend, i bought a shorter one and put the dash back together. I also added the wire connected to my radio for the ipod. while i was changing the speedo wire i cleaned up some of the wires underneathe the hood. And today i just spent time with the family and realxed at home.

slugish · 04-04-2010, 09:35 PM

Quote:

Originally Posted by S10Fan

Um, it does have a nice, um, rake.

LOL

Ha Ha , good one Brian

harnalien · 04-04-2010, 09:55 PM

I learned the hard way that the holes in the control arm crossshaft are there for a reason!

GMC91 · 04-04-2010, 09:58 PM

I fixed my power steering once agian. I also finished shaving my stake holes and other holes on the bed.

*87 chevy silverado* · 04-04-2010, 10:00 PM

Quote:

Originally Posted by Fat Hoe

I took the cab off of my parts truck and cut the front of the frame off...I also took the bed loose, just gotta get someone come help guide it while I take it off with the backhoe...87 chevy silverado on here came over to my house to get some parts...he's a good guy...me and him chewed the fat for a little while...besides that not much more...I'm going to go out to the crew cab in a minute and try and install the driver's door glass and regulator that I pulled earlier

thank you Fat Hoe. i did gust about the same (the bed part)

*Stitch* · 04-04-2010, 10:06 PM

hey no problem...Timmy had to goto an Easter thing once yall left...I took the bolts out...funny thing is the rear bolts came out like butter...anyways, when Timmy got back it was too late to yank the bed, so we're going to get it off tomorrow...I already got some tires out in the yard to set it on...I did actually get the driver's window propped up in the crewcab after you left...I want to get all new weatherstripping and window channels and all before I put the window tracks and regulator back in...

*87 chevy silverado* · 04-04-2010, 10:08 PM

Quote:

Originally Posted by staggerd86c-10

well i finished up my train horn under my truck and got it all up and running, I also attempted to put the camaro swaybar on the rear of the truck but it didn't work. I also added a toolbox in the back of my truck but im not sure if im keeping it or not so i didnt bolt it in yet. And i got her all washed up for the weekly hangout but i never got there. That was friday. Saturday i took my dash apart to find out why my speedo stopped working turns out the angle of the cable kinked it and just broke the cable at the bend, i bought a shorter one and put the dash back together. I also added the wire connected to my radio for the ipod. while i was changing the speedo wire i cleaned up some of the wires underneathe the hood. And today i just spent time with the family and realxed at home.

looks good in there

fpjr0 · 04-04-2010, 10:23 PM

installed my obdII plug for my scanner, drove around at the park with my little ones

flamingbig10 · 04-04-2010, 11:03 PM

went to a car show Saturday night and on the way home the throttle cable popped off the bracket wile I was on the high way trying to romp on but no go lucky the cable was still pulling on the carburetor about 1/4 throttle with peddle on the floor so I had to limp it home at 50 or so, wile getting off the off ramp I was a little afraid driving it on the main road since I still had about 2 miles to go but luckily it made it home and inspected the throttle bracket and its all bent up so I added a hd zip till I get to fix it right

hot trux · 04-04-2010, 11:45 PM

It is LIGHT!!!! pulled her out in the sun today, 1st time out.Alignment and paint the top side of hood and she's ready for summer!!! (me 2) Happy Easter!

West Texas Z · 04-05-2010, 12:35 AM

I went from this:

To this:

This was a temporary fix. Tape, sand, and paint. The old trim was driving me nuts so we gave it a quick fix. Looks new in person. lol I'll get all new trim when the truck hits paint.

New wind shield this week.

mongoose · 04-05-2010, 01:54 AM

not very much.... picked up a new bike went for a rip today... definitely need to send out the suspension to be tweaked a bit, after that it's time to hit the shore HARD... and wait for sun peaks to open.

**N2TRUX** · 04-05-2010, 11:39 AM

staggerd86c, hot trux, West Texas Z- Looks like a lot of Spring cleaning going on. Nice work folks.

I worked on my yard some Saturday, then met my daughter for a late lunch. Saturday evening I made some progress on my bathroom remodel. Sunday I washed the drivers and went to my Bro-in-Laws house for Easter festivities. Lots of good company and great food.

Sunday evening I did touch up on the bathroom, and hung the new light fixture. It much easier to work with real lights rather than flashlight's.

04-04-2010, 05:42 PM	#1
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,284	What did you get done 4/4 Easter/Passover edition I didnt do anything 82 related. I drove the S10 last week and it was squeaking so i inspected the brakes and found nothing wrong and i decided to shampoo the dirty seats and floor on that.. amazingly they are not black seats they are grey and the floor is not mud brown its black... did find out the heater core has a leak or something else that makes the passenger side floor wet How about you all? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

04-04-2010, 06:25 PM	#2
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Wat did you get done 4/4 Easter/Passover edition I took the cab off of my parts truck and cut the front of the frame off...I also took the bed loose, just gotta get someone come help guide it while I take it off with the backhoe...87 chevy silverado on here came over to my house to get some parts...he's a good guy...me and him chewed the fat for a little while...besides that not much more...I'm going to go out to the crew cab in a minute and try and install the driver's door glass and regulator that I pulled earlier

04-04-2010, 07:15 PM	#3
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,640	Re: Wat did you get done 4/4 Easter/Passover edition Another busy weekend. Now that all the concrete work is complete i cleaned up my backyard and spread some dirt around. A friend of mine dropped off a new rear end I'll be installing in the Heap. The rear is a 10 bolt with a brand new Richmond Gear 4:10, bearings, brakes, E-brake cables, everything is new. The 4:10 and my 700R should get along very well and help improve my around town fuel mileage. Made fuel lines for my S-10 and began the process of cleaning her up under the hood. The billet and chrome under the hood didn't do too well while parked outside on the grass. Thankfully my parking on the grass days are over. I purchased a fuse panel cover (firewall side) from bigblock73, it arrived earlier in the week. Very well made piece, hopefully I'll get it installed next weekend. Back to work Monday for some rest. LOL __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

04-04-2010, 07:30 PM	#4
slugish Slugish Join Date: Jan 2005 Location: Earlysville, Va. Posts: 1,024	Re: Wat did you get done 4/4 Easter/Passover edition Trip to Lowes , honey doo's honey doo's. Iguess not a ggod way to level out my redneck raked truck > oh well

04-04-2010, 07:37 PM	#5
low79fx Registered User Join Date: Jun 2008 Location: odessa,tx Posts: 208	Re: Wat did you get done 4/4 Easter/Passover edition Went to church.Praise,worship and Glorify Our Risen Lord!!

04-04-2010, 08:10 PM	#8
1LowToy Registered User Join Date: Nov 2009 Location: Sonora California Posts: 860	Re: Wat did you get done 4/4 Easter/Passover edition I negotiated a deal for a parts truck that has already been mostly parted out. The goodies left on it will make it worth my while. The front end got bent and I noticed the main front crossmember cracked which is very odd. I'll post pics when I get a chance. Got to get it home yet to finish it off. I rebuilt the carb on my 250/6 and I'm only half impressed with how that came out. I should have noted the metering rod size for referrance while I had it appart. As it turns out it's still on the lean side. Better than it was but not perfect. Last edited by 1LowToy; 04-04-2010 at 08:11 PM.

04-04-2010, 08:12 PM	#9
Restrorob The One And Only !!! Join Date: Jan 2007 Location: Hole in the woods Florida Posts: 4,567	Re: Wat did you get done 4/4 Easter/Passover edition Sanded on some sport mirrors I bought from JWALL for my 97, Gotta give um a coat of gloss black before install..... __________________ 93 Jeep XJ 88 Buick La Sabra Toys; 88 TA-GTA in the works.... 97 GMC Ext. Cab 502 Crate 5 Spd......Sucks Gas But Haulz Azz ! The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic. *"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!*

04-04-2010, 09:05 PM	#10
Slofarmtruck Registered User Join Date: Feb 2010 Location: Waukesha, WI Posts: 162	Re: Wat did you get done 4/4 Easter/Passover edition Cut a half a coil off front springs to level the ride height/clean up 20+ years of grease and rust on the front suspension and steering. Followed by using the truck to go pick up my T5 trans and accessories for the project car. I love having a truck again!

04-04-2010, 09:22 PM	#11
Kalashnikov46 Registered User Join Date: Mar 2010 Location: Casper, Wyoming Posts: 147	Re: Wat did you get done 4/4 Easter/Passover edition nice license plate!

04-04-2010, 09:30 PM	#12
kelsfine69 18 Till I Die Join Date: Mar 2005 Location: Alberta, Canada Posts: 1,522	Re: Wat did you get done 4/4 Easter/Passover edition I took all the Ralleys off and gave them a good sanding and then gave them a freah coat of silver and clear.. Then took all the sills off and gave them a coat of black paint...repainted the rockers where you step and also took the kickpanels off and the brake/gas pedals and cleaned them before reinstalling them...Gave the inside of the truck a good cleaning...Still need to get on the carpet..... Attached Images __________________ 2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home...

04-04-2010, 09:31 PM	#13
staggerd86c-10 Squarebody Aficionado Join Date: May 2008 Location: Miami, FL Posts: 713	Re: Wat did you get done 4/4 Easter/Passover edition well i finished up my train horn under my truck and got it all up and running, I also attempted to put the camaro swaybar on the rear of the truck but it didn't work. I also added a toolbox in the back of my truck but im not sure if im keeping it or not so i didnt bolt it in yet. And i got her all washed up for the weekly hangout but i never got there. That was friday. Saturday i took my dash apart to find out why my speedo stopped working turns out the angle of the cable kinked it and just broke the cable at the bend, i bought a shorter one and put the dash back together. I also added the wire connected to my radio for the ipod. while i was changing the speedo wire i cleaned up some of the wires underneathe the hood. And today i just spent time with the family and realxed at home.

04-04-2010, 09:55 PM	#15
harnalien TruckincrazY Join Date: May 2004 Location: Haslet, TX Posts: 493	Re: Wat did you get done 4/4 Easter/Passover edition I learned the hard way that the holes in the control arm crossshaft are there for a reason!

04-04-2010, 09:58 PM	#16
GMC91 Always trouble Join Date: Jul 2009 Location: Hartsellle, Al Posts: 1,111	Re: Wat did you get done 4/4 Easter/Passover edition I fixed my power steering once agian. I also finished shaving my stake holes and other holes on the bed. __________________ 91 Silverado Regular cab, 2wd, swb-project truck 97 Silverado Extended cab, 2wd, swb-driver

04-04-2010, 10:06 PM	#18
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Wat did you get done 4/4 Easter/Passover edition hey no problem...Timmy had to goto an Easter thing once yall left...I took the bolts out...funny thing is the rear bolts came out like butter...anyways, when Timmy got back it was too late to yank the bed, so we're going to get it off tomorrow...I already got some tires out in the yard to set it on...I did actually get the driver's window propped up in the crewcab after you left...I want to get all new weatherstripping and window channels and all before I put the window tracks and regulator back in... Last edited by Stitch; 04-04-2010 at 10:07 PM.

04-04-2010, 10:23 PM	#20
fpjr0 Registered User Join Date: Mar 2009 Location: san antonio tx Posts: 202	Re: Wat did you get done 4/4 Easter/Passover edition installed my obdII plug for my scanner, drove around at the park with my little ones __________________ ONCE YOU GO LS, YOU NEVER WANT LESS!!



Register or Log In To remove these advertisements.

04-04-2010, 11:03 PM	#21
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: What did you get done 4/4 Easter/Passover edition went to a car show Saturday night and on the way home the throttle cable popped off the bracket wile I was on the high way trying to romp on but no go lucky the cable was still pulling on the carburetor about 1/4 throttle with peddle on the floor so I had to limp it home at 50 or so, wile getting off the off ramp I was a little afraid driving it on the main road since I still had about 2 miles to go but luckily it made it home and inspected the throttle bracket and its all bent up so I added a hd zip till I get to fix it right __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

04-04-2010, 11:45 PM	#22
hot trux '85 Stepside Join Date: Jan 2006 Location: montgomery city mo. Posts: 360	Re: What did you get done 4/4 Easter/Passover edition It is LIGHT!!!! pulled her out in the sun today, 1st time out.Alignment and paint the top side of hood and she's ready for summer!!! (me 2) Happy Easter! Last edited by N2TRUX; 04-05-2010 at 11:33 AM. Reason: for got pics

04-05-2010, 12:35 AM	#23
West Texas Z El Mero Mero Frijolero!! Join Date: Mar 2010 Location: Lubbock, Texas Posts: 669	Re: What did you get done 4/4 Easter/Passover edition I went from this: To this: This was a temporary fix. Tape, sand, and paint. The old trim was driving me nuts so we gave it a quick fix. Looks new in person. lol I'll get all new trim when the truck hits paint. New wind shield this week. __________________ My Toys: 1993 Ford Mustang LX 5.0 2001 Yamaha V Star 650 1984 Silverado > Build Page <

04-05-2010, 01:54 AM	#24
mongoose Registered User Join Date: Feb 2009 Location: slurrey, bc. Posts: 1,134	Re: What did you get done 4/4 Easter/Passover edition not very much.... picked up a new bike went for a rip today... definitely need to send out the suspension to be tweaked a bit, after that it's time to hit the shore HARD... and wait for sun peaks to open. __________________ -'73 c/10 - Low with Go - will be complete... probably never. -'90 2wd Blazer - well... soon enough anyways. -'84 SWB - the daily gas guzzler. Last edited by mongoose; 04-05-2010 at 01:54 AM.

04-05-2010, 11:39 AM	#25
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: What did you get done 4/4 Easter/Passover edition staggerd86c, hot trux, West Texas Z- Looks like a lot of Spring cleaning going on. Nice work folks. I worked on my yard some Saturday, then met my daughter for a late lunch. Saturday evening I made some progress on my bathroom remodel. Sunday I washed the drivers and went to my Bro-in-Laws house for Easter festivities. Lots of good company and great food. Sunday evening I did touch up on the bathroom, and hung the new light fixture. It much easier to work with real lights rather than flashlight's. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

Register or Log In To remove these advertisements.