FL 8 inch wide truck steelies - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jmedero · 04-07-2010, 12:53 AM

Just testing the water for interest on these. They are the factory 8 inch wide 6 lug steelies. They are in good shape, not bent up or stuff like that. They need a fresh coat of paint and your off.
Is there an interest? What's the going rate for these wheels? I can post pics if needed.

Thanks for your help.

**NC67Chev** · 04-07-2010, 10:41 AM

I might be interested. Can you post a picture? What year truck did they come off of? Thanks!

jmedero · 04-12-2010, 10:31 PM

ok sorry guys it has taken me a couple of days, I have been busy at work. The wheels are 15x8 and have a 4 inch backspace. One of the wheels I started to clean up so that I can get it painted but I have started the 5 lug swap so the wheels will no longer fit. They are original to our trucks. The tires are good on them. I am asking $250 plus shipping. Let me know if anyone is interested.
Thanks

neo1370 · 04-13-2010, 05:09 AM

I 'm interest in wheels only shipped to 16145 if you don't get any takers on both

**special-K** · 04-13-2010, 07:27 AM

FYI,these aren`t original to 67-72 trucks.They were aftermarket and offered later on 4wds.But,they are a perfect factory-looking way to go.The only wide wheels offered back then were 16.5s because they were the only wide truck tires back then.

**NC67Chev** · 04-13-2010, 07:32 AM

Thanks for posting the pics. Due to them having 4 nubs for the hubcaps, I don't think these will work with my hubcaps. However to make sure, would it be possible to get a measurement of the inside diameter of one of the hubcaps?
Thanks again!

jmedero · 04-13-2010, 08:35 AM

Thanks special k. Always cool to learn a thing or two.
I'll measure the hubcaps here in a bit and I'll post.

jmedero · 04-14-2010, 12:19 AM

Ok I have measured the hub caps from inner lip to inner lip. This measurement is 10 1/8. Hope this helps out with any questions.
Let me see if they sell all together if not I'll look into selling just the wheels.

Thanks

RoadDevil13 · 04-14-2010, 12:29 AM

damn wish those were 5 lug...those are great

ccr72 · 04-14-2010, 05:48 PM

Shipping to 63846 please, thanx Ronnie

jmedero · 04-15-2010, 12:19 AM

ok I have had several PM's about measuring the inner part of the hub cap. Here you go guys, sorry for the delay just been busy. If you have any questions just let me know. I will get shipping quotes for those who have asked me in the am.
thanks guys.
Juan

**special-K** · 04-15-2010, 07:18 AM

All 5 and 6 lug GM wheels take the same cap.

jmedero · 04-15-2010, 08:54 AM

Well I had several ask me to measure. I guess they just want to make sure their caps will fit

jmedero · 04-15-2010, 06:48 PM

Ccr72 to ship them to you will be $53 a wheel. I can get it down to $45 if I can find boxes that will fit them. Also if you ship to a business address it will go down as well. Let me know.

Holland · 04-17-2010, 07:58 AM

Can i get a price shipped to 27317 nc its a business address

jmedero · 04-17-2010, 09:28 AM

Holland let's say $150 for shipping. If it's more then that I'll cover it, if it's less I'll refund it. Let me know, thanks

jmedero · 04-17-2010, 11:02 PM

Ccr72 I checked with fedex and they said $34 a wheel shipped to you.

Holland I checked fedex and they said $31 a wheel to you. I could not plug in that it wa for a business place of delivery so it might go down even more when I take them in to the hub.

Let me know guys. Aparently fedex is a lot cheaper on the big stuff, thanks for the tip rob!

jmedero · 04-19-2010, 12:09 AM

ttt

jmedero · 04-22-2010, 11:14 PM

bump.
wheels are off the truck now so they are ready to ship and sell. Lets make a deal!

jmedero · 05-05-2010, 08:35 PM

Ttt

jhwkns · 05-05-2010, 09:11 PM

PM sent.

jmedero · 05-06-2010, 10:59 PM

Sold!!

jhwkns · 05-17-2010, 03:42 PM

Juan; This is the truck they're going on.

The tailgate took what seemed like forever to finish.

I can't wait to see what they look like on the truck.

I haven't even got them yet, and I've already turned into an obsessive/compulsive hubcap collector.

jhwkns · 05-25-2010, 10:32 AM

I picked up the wheels at the P.O. yesterday, Thanks Juan; They look great!

04-07-2010, 12:53 AM	#1
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	8 inch wide truck steelies Just testing the water for interest on these. They are the factory 8 inch wide 6 lug steelies. They are in good shape, not bent up or stuff like that. They need a fresh coat of paint and your off. Is there an interest? What's the going rate for these wheels? I can post pics if needed. Thanks for your help. __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

04-07-2010, 10:41 AM	#2
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 698	Re: 8 inch wide truck steelies I might be interested. Can you post a picture? What year truck did they come off of? Thanks! __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar

04-12-2010, 10:31 PM	#3
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 8 inch wide truck steelies ok sorry guys it has taken me a couple of days, I have been busy at work. The wheels are 15x8 and have a 4 inch backspace. One of the wheels I started to clean up so that I can get it painted but I have started the 5 lug swap so the wheels will no longer fit. They are original to our trucks. The tires are good on them. I am asking $250 plus shipping. Let me know if anyone is interested. Thanks Attached Images __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084 Last edited by jmedero; 04-12-2010 at 10:55 PM. Reason: added pics

04-13-2010, 05:09 AM	#4
neo1370 Registered User Join Date: Aug 2006 Location: PA Posts: 241	Re: 8 inch wide truck steelies I 'm interest in wheels only shipped to 16145 if you don't get any takers on both

04-13-2010, 07:27 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 8 inch wide truck steelies FYI,these aren`t original to 67-72 trucks.They were aftermarket and offered later on 4wds.But,they are a perfect factory-looking way to go.The only wide wheels offered back then were 16.5s because they were the only wide truck tires back then. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-13-2010, 07:32 AM	#6
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 698	Re: 8 inch wide truck steelies Thanks for posting the pics. Due to them having 4 nubs for the hubcaps, I don't think these will work with my hubcaps. However to make sure, would it be possible to get a measurement of the inside diameter of one of the hubcaps? Thanks again! __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar

04-13-2010, 08:35 AM	#7
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 8 inch wide truck steelies Thanks special k. Always cool to learn a thing or two. I'll measure the hubcaps here in a bit and I'll post. __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

04-14-2010, 12:19 AM	#8
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 8 inch wide truck steelies Ok I have measured the hub caps from inner lip to inner lip. This measurement is 10 1/8. Hope this helps out with any questions. Let me see if they sell all together if not I'll look into selling just the wheels. Thanks __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

04-14-2010, 12:29 AM	#9
RoadDevil13 Registered User Join Date: Dec 2009 Location: Henderson, NV Posts: 52	Re: 8 inch wide truck steelies damn wish those were 5 lug...those are great

04-14-2010, 05:48 PM	#10
ccr72 Registered User Join Date: Oct 2009 Location: essex mo Posts: 23	Re: 8 inch wide truck steelies Shipping to 63846 please, thanx Ronnie

04-15-2010, 12:19 AM	#11
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 8 inch wide truck steelies ok I have had several PM's about measuring the inner part of the hub cap. Here you go guys, sorry for the delay just been busy. If you have any questions just let me know. I will get shipping quotes for those who have asked me in the am. thanks guys. Juan Attached Images __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

04-15-2010, 07:18 AM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 8 inch wide truck steelies All 5 and 6 lug GM wheels take the same cap. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-15-2010, 08:54 AM	#13
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 8 inch wide truck steelies Well I had several ask me to measure. I guess they just want to make sure their caps will fit __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

04-15-2010, 06:48 PM	#14
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 8 inch wide truck steelies Ccr72 to ship them to you will be $53 a wheel. I can get it down to $45 if I can find boxes that will fit them. Also if you ship to a business address it will go down as well. Let me know. __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

04-17-2010, 07:58 AM	#15
Holland Registered User Join Date: Nov 2008 Location: RANDLEMAN NC Posts: 2	Re: 8 inch wide truck steelies Can i get a price shipped to 27317 nc its a business address



Register or Log In To remove these advertisements.

04-17-2010, 09:28 AM	#16
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 8 inch wide truck steelies Holland let's say $150 for shipping. If it's more then that I'll cover it, if it's less I'll refund it. Let me know, thanks __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

04-17-2010, 11:02 PM	#17
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 8 inch wide truck steelies Ccr72 I checked with fedex and they said $34 a wheel shipped to you. Holland I checked fedex and they said $31 a wheel to you. I could not plug in that it wa for a business place of delivery so it might go down even more when I take them in to the hub. Let me know guys. Aparently fedex is a lot cheaper on the big stuff, thanks for the tip rob! __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

04-19-2010, 12:09 AM	#18
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 8 inch wide truck steelies ttt __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

04-22-2010, 11:14 PM	#19
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 8 inch wide truck steelies bump. wheels are off the truck now so they are ready to ship and sell. Lets make a deal! __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

05-05-2010, 08:35 PM	#20
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 8 inch wide truck steelies Ttt __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

05-05-2010, 09:11 PM	#21
jhwkns Registered Cruiser Join Date: May 2002 Location: Las Vegas NV Posts: 2,230	Re: 8 inch wide truck steelies PM sent. __________________ I intend to live forever. So far, so good.

05-06-2010, 10:59 PM	#22
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 8 inch wide truck steelies Sold!! __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

05-17-2010, 03:42 PM	#23
jhwkns Registered Cruiser Join Date: May 2002 Location: Las Vegas NV Posts: 2,230	Re: 8 inch wide truck steelies Juan; This is the truck they're going on. The tailgate took what seemed like forever to finish. I can't wait to see what they look like on the truck. I haven't even got them yet, and I've already turned into an obsessive/compulsive hubcap collector. __________________ I intend to live forever. So far, so good.

05-25-2010, 10:32 AM	#24
jhwkns Registered Cruiser Join Date: May 2002 Location: Las Vegas NV Posts: 2,230	Re: 8 inch wide truck steelies I picked up the wheels at the P.O. yesterday, Thanks Juan; They look great! __________________ I intend to live forever. So far, so good.

Register or Log In To remove these advertisements.