FL 6 cylinder 250 parts cheap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MAK191 · 04-08-2010, 08:11 PM

I have pretty much every part off of a 250 that I had to get rid of. Engine ran pretty good before it was pulled out.

Carb SOLD
Air cleaner assembly $5 ( lower is in good shape but top has dent)
intake and exhaust manifolds $20 (set)
Distributor $15
Distributor hold down $5
Coil $5
Engine wire harness $5
motor mounts on block SOLD to Puropedo
Alternator $10
Alternator brackets $5 (2)
fuel line from pump to carb $5
water pump pulley $10
Valve Cover $15
harmonic balancer $10
timing cover $5
water neck thermo housing SOLD to Renfro85
bellhousing lower covers SOLD 69shortstep

And anything else you see in the pictures that you may want. All prices are OBO. I have pretty much everything but the block. Buyer to pay shipping.

*Puropedo* · 04-08-2010, 10:10 PM

PM sent

Renfro85 · 04-09-2010, 02:21 AM

pm sent

69gmc292 · 04-09-2010, 11:37 AM

Put my inline for the Carb.

MAK191 · 04-09-2010, 12:17 PM

all pm's sent

MAK191 · 04-10-2010, 10:19 AM

ttt

**72ironmike** · 04-10-2010, 10:40 AM

Any power steering setup ?

MAK191 · 04-11-2010, 10:25 AM

Quote:

Originally Posted by 72ironmike

Any power steering setup ?

Sorry no power steering.

MAK191 · 04-12-2010, 10:49 AM

ttt

69ShortStep · 04-12-2010, 12:43 PM

Do you have the lower bellhousing cover?

MAK191 · 04-12-2010, 07:19 PM

Quote:

Originally Posted by 69ShortStep

Do you have the lower bellhousing cover?

yes I do, sent you a pm

TWOStep · 04-12-2010, 09:42 PM

PM sent about carb

MAK191 · 04-13-2010, 05:24 PM

Carb sold to 69GMC292

MAK191 · 04-13-2010, 05:27 PM

Quote:

Originally Posted by 69ShortStep

Do you have the lower bellhousing cover?

Here is the picture I have of the bellhousing cover. Sorry it is dirty, but the cover is in good condition. I will pull it out of storage and get it cleaned up if you want it.

Capt Kurt · 04-13-2010, 11:06 PM

I need the alternator brackets and the motor mounts and the tranny cover.
How much for the head?

**ScottH** · 04-14-2010, 10:22 AM

Would u sell the valve cover breather for $5?

thanks.

Scott

MAK191 · 04-14-2010, 12:44 PM

Quote:

Originally Posted by ScottH

Would u sell the valve cover breather for $5?

thanks.

Scott

Yes, PM sent

**70STOVEBOLT** · 04-14-2010, 03:37 PM

How much do you want for the choke thermostat shipped to 46562?
Thanks,
Mark

MAK191 · 04-14-2010, 11:28 PM

Quote:

Originally Posted by 70STOVEBOLT

How much do you want for the choke thermostat shipped to 46562?
Thanks,
Mark

Is that the metal spring thing on the intake next to the carb? if so I can do it for $11 shipped(shipping is $6). but let me make sure it's in good shape first.

Mike

**70STOVEBOLT** · 04-15-2010, 09:42 AM

Quote:

Originally Posted by MAK191

Is that the metal spring thing on the intake next to the carb? if so I can do it for $11 shipped(shipping is $6). but let me make sure it's in good shape first.

Mike

Mike, that is it. If it's good, I'll take it.

Thanks,
Mark

hubert hefner · 04-18-2010, 08:41 AM

how about the alt brackets and the motor mounts that are on the block to 46975? what year of truck is this engine from? thanks, dustin

**70STOVEBOLT** · 04-19-2010, 11:52 AM

Mike, any word on the choke t-stat?

Thanks,
Mark

MAK191 · 04-19-2010, 09:02 PM

Quote:

Originally Posted by 70STOVEBOLT

Mike, any word on the choke t-stat?

Thanks,
Mark

Here ya go Mark. sorry it took so long I was out of town for the weekend

hubert hefner · 04-20-2010, 08:27 AM

how about the motor mounts that bolt onto the block and the alt brackets to 46975.

thanks, dustin

**70STOVEBOLT** · 04-20-2010, 08:37 AM

Mike, looks good. $11 shipped, do you take paypal? Please PM payment info.

Thanks,
Mark

04-08-2010, 08:11 PM	#1
MAK191 Registered User Join Date: Nov 2009 Location: FL Posts: 335	6 cylinder 250 parts cheap I have pretty much every part off of a 250 that I had to get rid of. Engine ran pretty good before it was pulled out. Carb SOLD Air cleaner assembly $5 ( lower is in good shape but top has dent) intake and exhaust manifolds $20 (set) Distributor $15 Distributor hold down $5 Coil $5 Engine wire harness $5 motor mounts on block SOLD to Puropedo Alternator $10 Alternator brackets $5 (2) fuel line from pump to carb $5 water pump pulley $10 Valve Cover $15 harmonic balancer $10 timing cover $5 water neck thermo housing SOLD to Renfro85 bellhousing lower covers SOLD 69shortstep And anything else you see in the pictures that you may want. All prices are OBO. I have pretty much everything but the block. Buyer to pay shipping. Attached Images Last edited by MAK191; 04-21-2010 at 12:28 PM.

04-08-2010, 10:10 PM	#2
Puropedo Account Suspended Join Date: Nov 2008 Location: Prunedale California Posts: 782	Re: 6 cylinder 250 parts cheap PM sent

04-09-2010, 02:21 AM	#3
Renfro85 Registered User Join Date: Jan 2010 Location: Alabaster,AL Posts: 36	Re: 6 cylinder 250 parts cheap pm sent __________________ 1991 Camaro Z28

04-09-2010, 11:37 AM	#4
69gmc292 Registered User Join Date: Mar 2007 Location: tucson Posts: 71	Re: 6 cylinder 250 parts cheap Put my inline for the Carb.

04-09-2010, 12:17 PM	#5
MAK191 Registered User Join Date: Nov 2009 Location: FL Posts: 335	Re: 6 cylinder 250 parts cheap all pm's sent

04-10-2010, 10:19 AM	#6
MAK191 Registered User Join Date: Nov 2009 Location: FL Posts: 335	Re: 6 cylinder 250 parts cheap ttt

04-10-2010, 10:40 AM	#7
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,048	Re: 6 cylinder 250 parts cheap Any power steering setup ?

04-12-2010, 10:49 AM	#9
MAK191 Registered User Join Date: Nov 2009 Location: FL Posts: 335	Re: 6 cylinder 250 parts cheap ttt

04-12-2010, 12:43 PM	#10
69ShortStep Registered User Join Date: Jan 2004 Location: Canal Winchester, OH Posts: 143	Re: 6 cylinder 250 parts cheap Do you have the lower bellhousing cover?

04-12-2010, 09:42 PM	#12
TWOStep Registered User Join Date: Jun 2006 Location: Newark, Illinois Posts: 25	Re: 6 cylinder 250 parts cheap PM sent about carb

04-13-2010, 05:24 PM	#13
MAK191 Registered User Join Date: Nov 2009 Location: FL Posts: 335	Re: 6 cylinder 250 parts cheap Carb sold to 69GMC292

04-13-2010, 11:06 PM	#15
Capt Kurt Registered User Join Date: Apr 2010 Location: fort myers fl Posts: 15	Re: 6 cylinder 250 parts cheap I need the alternator brackets and the motor mounts and the tranny cover. How much for the head? Last edited by powerdriver 1958; 05-02-2010 at 11:36 PM.

04-14-2010, 10:22 AM	#16
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: 6 cylinder 250 parts cheap Would u sell the valve cover breather for $5? thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

04-14-2010, 03:37 PM	#18
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,254	Re: 6 cylinder 250 parts cheap How much do you want for the choke thermostat shipped to 46562? Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

04-18-2010, 08:41 AM	#21
hubert hefner Registered User Join Date: Apr 2010 Location: rochester, in Posts: 31	Re: 6 cylinder 250 parts cheap how about the alt brackets and the motor mounts that are on the block to 46975? what year of truck is this engine from? thanks, dustin



Register or Log In To remove these advertisements.

04-19-2010, 11:52 AM	#22
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,254	Re: 6 cylinder 250 parts cheap Mike, any word on the choke t-stat? Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

04-20-2010, 08:27 AM	#24
hubert hefner Registered User Join Date: Apr 2010 Location: rochester, in Posts: 31	Re: 6 cylinder 250 parts cheap how about the motor mounts that bolt onto the block and the alt brackets to 46975. thanks, dustin __________________ '68 C10 Custom lwb "The Black Bandit" '96 GMC Jimmy 4x4 4dr (daily driver) '00 Grand prix GT(wifes car) My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=566656

04-20-2010, 08:37 AM	#25
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,254	Re: 6 cylinder 250 parts cheap Mike, looks good. $11 shipped, do you take paypal? Please PM payment info. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

Register or Log In To remove these advertisements.