Just bought a 62 and two 64's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mr Pops · 04-19-2010, 12:28 PM

Just bought three trucks to make into one. Someone started on this, and I'm going to start over from scratch. Currently the 64 shortbox has the front clip off the 62 one ton. The 62 cab is in better shape, (and I like the 60-63 cabs better) so I'm going to put the 62 cab on the 64 SWB frame. Rad support is good, comes with a good hood, (not in pics) good front inner and outer fenders, complete dash, good box walls and V8 mounts. Rear fenders are crap, and its missing a tailgate. Currently has a 305/ Turbo 350 trans combo in it, which I may swap for my 66 283 I got sitting in my garage. The third truck is in basically just a cab with a halfton LWB frame.

Mr Pops · 04-19-2010, 12:29 PM

Here's a few more pics..

jonzcustomshop · 04-19-2010, 04:19 PM

looks like a good start.
remember that the front mounts don't line up when putting a 60-62 on a 63 -66 frame.
It is not a huge deal, but it is not a direct bolt on either... I think most have just drilled new holes, and spaced it out a little bit.
are those step fenders glass?

Bulldoser65 · 04-19-2010, 10:32 PM

I like the rear fenders on the stepside, wish mine looked like that. Maybe I will have to get creative and make mine like that.

*LILRED66* · 04-19-2010, 11:41 PM

Great score...I would build the C30, for the most unique rig in the area. In any case, good luck and thanks for sharing.

Mr Pops · 04-20-2010, 03:18 AM

Quote:

Originally Posted by jonzcustomshop

looks like a good start.
remember that the front mounts don't line up when putting a 60-62 on a 63 -66 frame.
It is not a huge deal, but it is not a direct bolt on either... I think most have just drilled new holes, and spaced it out a little bit.
are those step fenders glass?

Hmm.. I didn't know that about the body mounts! I'll tackle it anyway though. At least you probably saved me a few bad words for when I would have found that out haha..

Mr Pops · 04-20-2010, 03:24 AM

Quote:

Originally Posted by LILRED66

Great score...I would build the C30, for the most unique rig in the area. In any case, good luck and thanks for sharing.

I like one tons too, but I really want to put the SWB frame to good use with a traditional roddin theme with a redone chassis and maybe a touch of patena. I might keep the 1 ton chassis for the 66 Ext cab I have kickin around, maybe throw that long fleetside box on it..

Mr Pops · 04-20-2010, 03:27 AM

Quote:

Originally Posted by jonzcustomshop

looks like a good start.
remember that the front mounts don't line up when putting a 60-62 on a 63 -66 frame.
It is not a huge deal, but it is not a direct bolt on either... I think most have just drilled new holes, and spaced it out a little bit.
are those step fenders glass?

Oh and the step fenders are metal. I saw welding bubbles and a horrible patch job on the front lower section, not sure if I want to save them.

Mr Pops · 04-20-2010, 03:33 AM

Quote:

Originally Posted by Bulldoser65

I like the rear fenders on the stepside, wish mine looked like that. Maybe I will have to get creative and make mine like that.

I think the rear fenders are the only body part that I'll have to find a replacement for since they have big ugly patches on the front sections. The taillight holes are cool, but I think I might use the taillights I removed from my old 60 Apache before I sold it. Heres a picture of them, they are 63 Impala lenses on trailer light buckets.

63doorstop · 04-20-2010, 09:47 PM

lol i was going to buy the box of the long box truck

**scotts62** · 04-20-2010, 10:15 PM

Cool deal!! keep us posted on the progress.

Mr Pops · 04-21-2010, 02:12 AM

Quote:

Originally Posted by 63doorstop

lol i was going to buy the box of the long box truck

Maybe we can work something out, I'm not in a hurry to use it since I have enough other projects on the go.

63sbssbbw · 04-22-2010, 06:44 AM

That's funny,I was eyeballin' it too
T

Mr Pops · 04-25-2010, 01:05 AM

Heres a few more pics..

Mr Pops · 04-25-2010, 01:12 AM

...

G-REX · 04-26-2010, 06:29 AM

Wow,that 62 1 ton would look sweet as a low ride wrecker,find an old school boom set up,drop it and drag with it.Nice score on all.

Mr Pops · 04-26-2010, 09:02 AM

Quote:

Originally Posted by G-REX

Wow,that 62 1 ton would look sweet as a low ride wrecker,find an old school boom set up,drop it and drag with it.Nice score on all.

I already swapped the 62 cab onto the SWB chassis, but the more I look at the 1 ton chassis with those wicked steel 18's, I want to do something with it too! I was thinking of slamming it and mounting the rear diff OVER TOP of the frame rail. (instead of notching the frame) ..has anyone ever done that???

04-19-2010, 12:28 PM	#1
Mr Pops Ridin' Dirty Join Date: Oct 2009 Location: Ardrossan Alberta Canada Posts: 2,193	Just bought a 62 and two 64's Just bought three trucks to make into one. Someone started on this, and I'm going to start over from scratch. Currently the 64 shortbox has the front clip off the 62 one ton. The 62 cab is in better shape, (and I like the 60-63 cabs better) so I'm going to put the 62 cab on the 64 SWB frame. Rad support is good, comes with a good hood, (not in pics) good front inner and outer fenders, complete dash, good box walls and V8 mounts. Rear fenders are crap, and its missing a tailgate. Currently has a 305/ Turbo 350 trans combo in it, which I may swap for my 66 283 I got sitting in my garage. The third truck is in basically just a cab with a halfton LWB frame. Attached Images __________________ 1978 C3500 Crewcab (Project) 1979 C2500 Crewcab (Driver/project) 1988 R2500 Crewcab (Driver) 1988 V3500 Crewcab 1988 R2500 Crewcab (Mint, Ex Fire Dept) 1968 Chev Suburban (4x4 conversion) LINK 1970 Chev C20 Suburban (driver/cruiser)LINK 2005 Impala (Incognito vehicle) 2004 Yukon XL Denali (Kid hauler) 1947 Case tractor Facebook Page(1000's of pictures of GM cars and trucks organized into albums) YouTube Channel

04-19-2010, 12:29 PM	#2
Mr Pops Ridin' Dirty Join Date: Oct 2009 Location: Ardrossan Alberta Canada Posts: 2,193	Re: Just bought a 62 and two 64's Here's a few more pics.. Attached Images __________________ 1978 C3500 Crewcab (Project) 1979 C2500 Crewcab (Driver/project) 1988 R2500 Crewcab (Driver) 1988 V3500 Crewcab 1988 R2500 Crewcab (Mint, Ex Fire Dept) 1968 Chev Suburban (4x4 conversion) LINK 1970 Chev C20 Suburban (driver/cruiser)LINK 2005 Impala (Incognito vehicle) 2004 Yukon XL Denali (Kid hauler) 1947 Case tractor Facebook Page(1000's of pictures of GM cars and trucks organized into albums) YouTube Channel

04-19-2010, 04:19 PM	#3
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: Just bought a 62 and two 64's looks like a good start. remember that the front mounts don't line up when putting a 60-62 on a 63 -66 frame. It is not a huge deal, but it is not a direct bolt on either... I think most have just drilled new holes, and spaced it out a little bit. are those step fenders glass? Attached Images __________________ 60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955

04-19-2010, 10:32 PM	#4
Bulldoser65 Registered User Join Date: Apr 2010 Location: Radcliff, KY Posts: 19	Re: Just bought a 62 and two 64's I like the rear fenders on the stepside, wish mine looked like that. Maybe I will have to get creative and make mine like that.

04-19-2010, 11:41 PM	#5
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Just bought a 62 and two 64's Great score...I would build the C30, for the most unique rig in the area. In any case, good luck and thanks for sharing.

04-20-2010, 09:47 PM	#10
63doorstop Registered User Join Date: Sep 2009 Location: spruce grove alberta Posts: 15	Re: Just bought a 62 and two 64's lol i was going to buy the box of the long box truck

04-20-2010, 10:15 PM	#11
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Just bought a 62 and two 64's Cool deal!! keep us posted on the progress. __________________ Scott 93 crew cab build Project 62

04-22-2010, 06:44 AM	#13
63sbssbbw UCA63 Join Date: Aug 2005 Location: Lloydminster AB Can. Posts: 1,637	Re: Just bought a 62 and two 64's That's funny,I was eyeballin' it too T __________________ member#7816 "63 sb ss bbw 350\350 12 bolt rear Pwr Fr Disc PS tilt '61 GMC in progress '63 GMC to use for parts '90 Chevy Ext cab sbfs 5.7l (current d d)

04-25-2010, 01:05 AM	#14
Mr Pops Ridin' Dirty Join Date: Oct 2009 Location: Ardrossan Alberta Canada Posts: 2,193	Re: Just bought a 62 and two 64's Heres a few more pics.. Attached Images __________________ 1978 C3500 Crewcab (Project) 1979 C2500 Crewcab (Driver/project) 1988 R2500 Crewcab (Driver) 1988 V3500 Crewcab 1988 R2500 Crewcab (Mint, Ex Fire Dept) 1968 Chev Suburban (4x4 conversion) LINK 1970 Chev C20 Suburban (driver/cruiser)LINK 2005 Impala (Incognito vehicle) 2004 Yukon XL Denali (Kid hauler) 1947 Case tractor Facebook Page(1000's of pictures of GM cars and trucks organized into albums) YouTube Channel

04-25-2010, 01:12 AM	#15
Mr Pops Ridin' Dirty Join Date: Oct 2009 Location: Ardrossan Alberta Canada Posts: 2,193	Re: Just bought a 62 and two 64's ... Attached Images __________________ 1978 C3500 Crewcab (Project) 1979 C2500 Crewcab (Driver/project) 1988 R2500 Crewcab (Driver) 1988 V3500 Crewcab 1988 R2500 Crewcab (Mint, Ex Fire Dept) 1968 Chev Suburban (4x4 conversion) LINK 1970 Chev C20 Suburban (driver/cruiser)LINK 2005 Impala (Incognito vehicle) 2004 Yukon XL Denali (Kid hauler) 1947 Case tractor Facebook Page(1000's of pictures of GM cars and trucks organized into albums) YouTube Channel

04-26-2010, 06:29 AM	#16
G-REX Registered User Join Date: Apr 2009 Location: Butler,Pa. Posts: 70	Re: Just bought a 62 and two 64's Wow,that 62 1 ton would look sweet as a low ride wrecker,find an old school boom set up,drop it and drag with it.Nice score on all.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.