VA FS: Shaved Cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 05-06-2010, 01:06 AM

I know I'm crazy...but I'm selling my shaved cab. I will have to store it until I get my blazer finished. Plus, I am planning on an LSX motor and would want to re-shape the firewall hump to fit that as well as add some bead rolling after seeing a sweet firewall. I already sold the bagged frame. SO>>> My 1970 NON-A/C cab is for sale. Shaved driprails, gas cap, defrost vents, center speaker hole with custom Chevrolet logo inlaid, shaved door latches, pinch weld, firewall shaved with 45 degree angle to cover driprail. Has the vin plate still attached and a good VA title. I planned to run a frame mounted or under dash brake booster setup as well as under dash A/C. I will include a set of door poppers with the cab. Comes with the original doors and a patch for the one lower door. THe driver's door is now rust free. had to patch the lower corner only. the passenger door had rot at the bottom we cut out already. Also includes a shaved wiper cowl. The firm price is 2500 as it sits (with the doors). For another 300 we'll patch and shave the doors as well. For 3500 total we'll do the doors and final body work and prime the cab and doors so it will be ready for paint.

Here are current pictures.

Check out my photobucket account for pictures of all the work done on the cab.

http://s562.photobucket.com/albums/s...bed/?start=all

VA72C10 · 05-07-2010, 10:13 PM

ttt

**kev2809** · 05-07-2010, 10:26 PM

bump for you..looks super clean man.

so no more bagged rig?

VA72C10 · 05-07-2010, 10:44 PM

I'm still going to do a bagged (Porterbuilt chassis) truck. I just want to do an LSX motor and I have some ideas for a custom floor, flush underside, and a new idea on the firewall to compliment the shorter look of the LSX. So instead of storing this cab till I'm ready for it and then chopping it up again, ...I'll sell this finished one to someone and build the other one when I'm ready for it. I can always find a rusty cab to chop up for all the custom work I'm planning

VA72C10 · 05-11-2010, 12:23 AM

ttt

ajgriffin · 05-17-2010, 10:55 PM

Would you be willing to take $2500 for this? I know the shipping will kill to CA and I'm way past the break point with my wife on truck spending right now. If you are I can get the money to you now and work the shipping out later.

Either way, awesome work on this cab!!!

VA72C10 · 05-23-2010, 01:12 AM

I'm willing to do 2500 now because I'm looking at another project and have to move this asap. However, I will need it moved ASAP. Let me know.

VA72C10 · 05-29-2010, 01:18 PM

ttt

VA72C10 · 06-01-2010, 08:28 PM

going to be priming the cab and getting the doors finished shaved since it's still available so price will be going up. Might be able to make this a SWB roller for someone...

VA72C10 · 06-05-2010, 12:20 AM

open to offers with or without the SWB frame....

VA72C10 · 06-05-2010, 11:30 AM

make me an offer....I want to move this now!

VA72C10 · 06-09-2010, 02:10 AM

ttt

VA72C10 · 06-11-2010, 02:11 AM

2100 without the doors plus shipping. 2250 with the doors (still need some work) plus shipping. 2750 with doors shaved and cab in primer.

VA72C10 · 06-13-2010, 09:22 AM

Includes the shaved wiper cowl (500-800 value)

VA72C10 · 06-14-2010, 11:45 PM

Quote:

Originally Posted by VA72C10

2100 without the doors plus shipping. 2250 with the doors (still need some work) plus shipping. 2750 with doors shaved and cab in primer.

Quote:

Originally Posted by VA72C10

Includes the shaved wiper cowl (500-800 value)

VA72C10 · 06-16-2010, 08:31 AM

ttt

VA72C10 · 06-17-2010, 02:28 PM

ttt...might just make me keep and finish this guys

VA72C10 · 09-16-2010, 10:46 AM

Have someone asking about this again so he will have first dibs...but my new lower price is
2000 for the shaved cab with a good set of doors and I will include the shaved wiper cowl for only 250 more. (500 for shaved wiper cowl by itself)

05-06-2010, 01:06 AM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	FS: Shaved Cab I know I'm crazy...but I'm selling my shaved cab. I will have to store it until I get my blazer finished. Plus, I am planning on an LSX motor and would want to re-shape the firewall hump to fit that as well as add some bead rolling after seeing a sweet firewall. I already sold the bagged frame. SO>>> My 1970 NON-A/C cab is for sale. Shaved driprails, gas cap, defrost vents, center speaker hole with custom Chevrolet logo inlaid, shaved door latches, pinch weld, firewall shaved with 45 degree angle to cover driprail. Has the vin plate still attached and a good VA title. I planned to run a frame mounted or under dash brake booster setup as well as under dash A/C. I will include a set of door poppers with the cab. Comes with the original doors and a patch for the one lower door. THe driver's door is now rust free. had to patch the lower corner only. the passenger door had rot at the bottom we cut out already. Also includes a shaved wiper cowl. The firm price is 2500 as it sits (with the doors). For another 300 we'll patch and shave the doors as well. For 3500 total we'll do the doors and final body work and prime the cab and doors so it will be ready for paint. Here are current pictures. Check out my photobucket account for pictures of all the work done on the cab. http://s562.photobucket.com/albums/s...bed/?start=all __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 05-23-2010 at 01:12 AM.

05-07-2010, 10:13 PM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: FS: Shaved Cab ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-07-2010, 10:26 PM	#3
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,140	Re: FS: Shaved Cab bump for you..looks super clean man. so no more bagged rig? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-07-2010, 10:44 PM	#4
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: FS: Shaved Cab I'm still going to do a bagged (Porterbuilt chassis) truck. I just want to do an LSX motor and I have some ideas for a custom floor, flush underside, and a new idea on the firewall to compliment the shorter look of the LSX. So instead of storing this cab till I'm ready for it and then chopping it up again, ...I'll sell this finished one to someone and build the other one when I'm ready for it. I can always find a rusty cab to chop up for all the custom work I'm planning __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-11-2010, 12:23 AM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: FS: Shaved Cab ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-17-2010, 10:55 PM	#6
ajgriffin Registered User Join Date: Feb 2008 Location: Carson, CA Posts: 581	Re: FS: Shaved Cab Would you be willing to take $2500 for this? I know the shipping will kill to CA and I'm way past the break point with my wife on truck spending right now. If you are I can get the money to you now and work the shipping out later. Either way, awesome work on this cab!!! __________________ 69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together

05-23-2010, 01:12 AM	#7
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: FS: Shaved Cab I'm willing to do 2500 now because I'm looking at another project and have to move this asap. However, I will need it moved ASAP. Let me know. __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-29-2010, 01:18 PM	#8
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: FS: Shaved Cab ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-01-2010, 08:28 PM	#9
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: FS: Shaved Cab going to be priming the cab and getting the doors finished shaved since it's still available so price will be going up. Might be able to make this a SWB roller for someone... __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-05-2010, 12:20 AM	#10
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: FS: Shaved Cab open to offers with or without the SWB frame.... __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-05-2010, 11:30 AM	#11
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: FS: Shaved Cab make me an offer....I want to move this now! __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-09-2010, 02:10 AM	#12
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: FS: Shaved Cab ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-11-2010, 02:11 AM	#13
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: FS: Shaved Cab 2100 without the doors plus shipping. 2250 with the doors (still need some work) plus shipping. 2750 with doors shaved and cab in primer. __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-13-2010, 09:22 AM	#14
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: FS: Shaved Cab Includes the shaved wiper cowl (500-800 value) __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-16-2010, 08:31 AM	#16
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: FS: Shaved Cab ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

06-17-2010, 02:28 PM	#17
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: FS: Shaved Cab ttt...might just make me keep and finish this guys __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-16-2010, 10:46 AM	#18
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: FS: Shaved Cab Have someone asking about this again so he will have first dibs...but my new lower price is 2000 for the shaved cab with a good set of doors and I will include the shaved wiper cowl for only 250 more. (500 for shaved wiper cowl by itself) __________________ Looking for a 67-72 swb or blazer project in or around VA.

Register or Log In To remove these advertisements.